Besuchte Konferenzen
-
MORTECH 2019 - 5th international Workshop
November 20-22, 2019, Paris (France)
Deadline for abstracts: June 1, 2019
Steffen Kastian
-
Computational modeling of Complex Materials across the Scales CMCS 2019
October 1-4, 2019, Glasgow (UK)
Deadline for abstracts: March 31, 2019
Stefanie Reese
-
7th ECCOMAS Thematic Conference on The Mechanical Response of Composites
September 18-20, 2019, Girona (Spain)
Deadline for abstracts: January 19, 2019
Jaan-Willem Simon: Modeling of honeycomb core sandwich panels undergoing interfacial crack propagation
Lukas Poggenpohl
-
XV International Conference on Computational Plasticity - COMPLAS 2019
September 3-5, 2019, Barcelona (Spain)
Deadline for abstracts: January 30, 2019
Stefanie Reese
Tim Brepols: A gradient-extended damage-plasticity model for large deformations: Theory and numerical aspects
Oliver Barfusz: Gradient-extended damage modeling with reduced integration-based continuum elements
Robert Eggersmann
Sebastian Felder
-
5th ECCOMAS Young Investigators Conference (YIC2019)
September 1-6, 2019, Krakow (Poland)
Deadline for abstracts: February 10, 2019
Johanna Waimann
-
8th GACM Colloquium on Computational Mechanics (GACM 2019)
August 30-28, 2019, Kassel (Germany)
Deadline for abstracts: March 30, 2019
Christian Gierden: Microstructural convergence analysis as basis for an efficient and accurate two-scale FE-FFT-based simulation approach
Kiran Manjunatha
Johanna Waimann
-
Computational methods in Multi-scale, Multi-uncertainty and Multi-physics Problems
July 15-17, 2019, Porto (Portugal)
Deadline for abstracts: February 15, 2019
Christian Gierden: Efficient and accurate two-scale FE-FFT-based prediction of polycrystalline material behavior at finite strains
-
5th International Conference on Mechanics of Composites
July 1-4, 2019, Lisbon (Portugal)
Deadline for abstracts: January 31, 2019
Jaan-Willem Simon: Modeling of delamination with bridging fibers in sandwich panels made of aluminium honeycomb core and CFRP facesheets
-
Modern Finite Element Technologies 2019
July 1-3, 2019, Bad Honnef (Germany)
Deadline for abstracts: March 1, 2019
Stefanie Reese
Hamid Reza Bayat: Interfacial crack propagation modeling in the framework of the cohesive discontinuous Galerkin method
-
6th International Conference on Material Modelling
June 26-28, 2018, Lund (Sweden)
Deadline for abstracts: December 1, 2018
Stefanie Reese
Johanna Waimann: Variational material modeling of the transformation induced plasticity in polycrystalline steel
Sebastian Felder
David Jaworek
Marie-Christine Reuvers: Development of a novel thermomechanically coupled damage approach for modeling woven ceramic matrix composites
Elisabeth Toups
-
3rd International Conference on Uncertainty Quantification in Computational Sciences and Engineering
June 24-26, 2019, Crete (Greece)
Deadline for abstracts: October 30, 2018
Steffen Kastian
-
6th edition of International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019)
June 12-14, 2019, Brunswick (Germany)
Deadline for abstracts: January 11, 2019
Stefanie Reese
Tim Brepols: A gradient-extended damage-plasticity model for large deformations with combined nonlinear hardening
Lukas Poggenpohl
Shahed Rezaei
-
VIII International Conference on Coupled Problems in Science and Engineering
June 3-5, 2019, Barcelona (Spain)
Deadline for abstracts: January 7, 2019
Katharina Martin
-
22nd International Conference on Material Forming (ESAFORM 2019)
May 8-10, 2019, Vitoria-Gasteiz (Spain)
Deadline for abstracts: October 22, 2018
Tim Breplos
-
PaperCon 2019
May 5-8, 2019, Indianapolis (USA)
Deadline for abstracts: October 26, 2018
Jaan-Willem Simon: Evaluating the mechanical response of fiber networks with RVEs
-
Research Challenges in Mechanics: Novel Methods and Applications for Automated Computational Modeling
March 20-22, 2019, Hanover (Germany)
Deadline for abstracts: November 1, 2018
Notification of acceptance: December 15, 2018
Marek Fassin: Efficient and reliable development of anisotropic damage models by means of AceGen
Robert Eggersmann
-
Euromech Colloquium 600: New challenges in finite element technology
March 12-14, 2019, Aachen (Germany)
Stefanie Reese
Johanna Waimann
Oliver Barfusz: Gradient-extended damage modeling with reduced integration-based continuum elements
Hamid Reza Bayat: Crack propagation modeling applying cohesivediscontinuous Galerkin method - Does locking matter?
-
90th GAMM Annual Meeting
February 18-22, 2019, Wien (Austria)
Deadline for abstracts: October 31, 2018
Notification of acceptance: November 23, 2018
Stefanie Reese
Tim Brepols: A gradient-extended damage-plasticity model for large deformations with nonlinear isotropic and kinematic hardening
Johanna Waimann: A variational material model for shape memory alloys under thermal cycling
Oliver Barfusz: Towards the incorporation of damage into solid-shells based on reduced integration
Marek Fassin: An anisotropic brittle damage model with a damage tensor of second order using a micromorphic approach
Christian Gierden: A model order reduction method for finite strain FFT solvers using a compressed sensing technique
David Jaworek: A Hashin-Shtrikman type semi-analytical homogenization procedure in multiscale modeling to account for coupled problems
Katharina Martin
Marie-Christine Reuvers: Development of a novel damage approach on the microstructure for modeling woven Ceramic Matrix Composites
Shahed Rezaei
Elisabeth Toups
-
19. Kolloquium: Gemeinsame Forschung in der Klebtechnik
Februar 12-13, 2019, Cologne (Germany)
Jaan-Willem Simon
Elisabeth Toups
-
International Conference on Plasticity, Damage, and Fracture 2019
January 3-9, 2019, Panama City (Panama)
Deadline for abstracts: May 1, 2018
Jaan-Willem Simon
-
ASC 33rd Annual Technical Conference/ 18th US-Japan Conference on Composite Materials/ ASTM D30
September 24-26, 2018, Seattle (USA)
Deadline for abstracts: March 16, 2018
Notification of acceptance: May 15, 2018
Daniel Höwer: Debonding of sandwich panels and solid laminates exhibiting fiber bridging; Organisation des Track S1: Sandwich Composites
-
21st Progress in Paper Physics Seminar (PPPS2018)
September 23-27, 2018, Lodz (Poland)
Deadline for abstracts: May 20, 2018
Notification of acceptance: June 1, 2018
Ahmad Alajami: Continuum modelling of the in-plane and out-of-plane behaviour of paper based on finite strain elasto-plasticity
Jaan Simon: Using representative volume elements for evaluating the out-of-plane response of fiber networks
-
9th International Congress of the Croatian Society of Mechanics
September 18-22, 2018, Split (Croatia)
Deadline for abstracts: January 31, 2018
Notification of acceptance: March 10, 2018
Julian Kochmann: A novel model order reduction method for FFT-based solvers using a sparse sampling technique
Stefanie Reese: Multiscale model order reduction using finite elements, fast Fourier transforms and proper orthogonal decomposition in engineering
-
21st International Conference on Composite Structures (ICCS21)
September 4-7, 2018, Bologna (Italy)
Deadline for abstracts: March 20, 2018
Notification of acceptance: June 30, 2018
-
Reduced Order Modeling in Mechanics of Materials
August 28-31, 2018, Bad Herrenalb (Germany)
Deadline for abstracts: April 1, 2018
Notification of acceptance: April 15, 2018
Registration deadline: May 15, 2018
Fabiola Cavaliere: The HSFE computational homogenization method to solve efficiently nonlinear multiscale problems
Steffen Kastian
Stefanie Reese
Stephan Wulfinghoff: Model order reduction of nonlinear homogenization problems using a Hashin-Shtrikman type finite element method
-
World Congress in Computational Mechanics
July 22-27, 2018, New York (USA)
Deadline for abstracts: December 31, 2017
Notification of acceptance: February 28, 2018
Stefanie Reese: Proper orthogonal decomposition (POD) combined with hierarchical tensor approximation (HTA) in the context of uncertain parameters
Jaan Simon: Numerical Evaluation of the out-of-plane response of fiber networks using a representative volume element; Organisation des Minisymposiums MS205: Progressive Damage Analysis and Mechanism Based Failure Predictions of Composites
Daniel Höwer: Disbonding of Sandwich Panels Exhibiting Fiber Bridging Accounting for Mode Mixity
-
International Conference on Mechanics of Composites
July 9-12, 2018, Madrid (Spain)
Deadline for abstracts: February 1, 2018
Notification of acceptance: March 31, 2018
Kavan Khaledi: A microscale finite element model for cold pressure welding in layered metal composites
-
10th European Solid Mechanics Conference (ESMC)
July 2-6, 2018, Bologna (Italy)
Deadline for abstracts: November 15, 2017
Notification of acceptance: January 31, 2018
Stefanie Reese: Organization of the minisymposium "Shape Memory Alloys – Modelling, Numerical Algorithms and Applications"
Atefeh Alipour: A grain boundary model for gradient-extended geometrically nonlinear crystal plasticity
Hamid Reza Bayat: A locking-free symmetric hybrid discontinuous Galerkin method for large deformations
Fabiola Cavaliere: Efficient two-scale simulations of engineering structures using the Hashin-Shtrikman type Finite Element method (HSFE)
Marek Fassin: A gradient-extended anisotropic damage model with crack-closure utilizing a micromorphic approach
Daniel Höwer: Mixed-mode debonding of sandwich panels exhibiting fiber bridging
Katharina Martin: A fully thermodynamically coupled model for thermo-viscoplasticity with application to thermal buckling
Stefanie Reese: Multiscale modeling using finite elements, fast Fourier transforms and proper orthogonal decomposition
Shahed Rezaei: A generalized interface model to account for anisotropic plasticity and damage at grain boundaries
Stephan Wulfinghoff: Model order reduction of nonlinear homogenization problems using a Hashin-Shtrikman type finite element method
-
European Conference on Composite Materials (ECCM18)
June 24-28, 2018, Athens (Greece)
Deadline for abstracts: December 15, 2017
Notification of acceptance: March 19, 2018
Sebastian Felder: A finite strain elasto-plastic material model for semicrystalline polymers incorporating kinematic and isotropic hardening
Daniel Höwer: A novel mixed-mode cohesive zone model for delamination with severe fiber bridging applied to sandwich panels and monolithic laminates
-
8th International Conference on Tribology in Manufacturing Processes and Joining by Plastic Deformation
June 24-27, 2018, Elsinore (Denmark)
Deadline for abstracts: October 1, 2017
Notification of acceptance: October 15, 2017
Kavan Khaledi: Finite element modeling of bond formation in cold roll bonding processes
-
6th European Conference on Computational Mechanics
June 11-15, 2018, Glasgow (UK)
Deadline for abstracts: December 15, 2017
Notification of acceptance: March 15, 2018
Oliver Barfusz: Solid-shells based on reduced integration - geometrically non-linear analysis of layered structures
Marek Fassin: A gradient-extended anisotropic damage and fracture model based on a second order damage tensor
Julian Kochmann: Numerically robust and efficient two-scale FE-FFT-based finite strain crystal plasticity simulations of polycrystalline materials
Katharina Martin: On the modelling of finite thermo-viscoplasticity with application to thermal buckling
Lukas Poggenpohl: A gradient-extended damage and fracture model for long fiber reinforced plastics
Stefanie Reese: Proper orthogonal decomposition (POD) combined with hierarchical tensor approximation (HTA) in the context of uncertain parameters
Jaan Simon: Progressive damage analysis of layered carbon fiber reinforced composites; Organisation des Minisymposiums MS85: Young Investigators Minisymposium
-
IUTAM Symposium on Model Order Reduction of Coupled Systems (MORCOS 2018)
May 22-25, 2018, Stuttgart (Germany)
Deadline for abstracts: December 4, 2017
Notification of acceptance: April 27, 2018
Stefanie Reese: Multi-scale modeling by means of a special variant of POD
Steffen Kastian: Proper orthogonal decomposition (POD) combined with hierarchical tensor approximation (HTA) in the context of uncertain parameters
-
The International Conference on Metallurgical Coatings and Thin Films (ICMCTF)
April 23-27, 2018, San Diego (USA)
Deadline for abstracts: October 1, 2017
Shahed Rezaei: Numerical investigation of damage and fracture in hard nano-coating layers using cohesive zone modeling
-
International ESAFORM Conference on Material Forming
April 23-25, 2018, Palermo (Italy)
Deadline for abstracts: October 28, 2017
Notification of acceptance: February 20, 2018
Hamid Reza Bayat: Generation of forming limit bands for ultra-high-strength steels in car body structures
Kavan Khaledi: Analysis of Factors Influencing the Bond Strength in Roll Bonding Processes
-
EMMC16 – 16th European Mechanics of Materials Conference
March 26-28, 2018, Nantes (France)
Deadline for abstracts: October 22, 2017
Notification of acceptance: December 1, 2017
Atefeh Alipour: Control-point based hybrid discontinuous Galerkin method for geometrically nonlinear crystal plasticity
Stefanie Reese: A flexible ‘two-surface’ gradient-extended damage model for quasi-brittle and ductile materials
Shahed Rezaei: Developing an interface model to investigate the damage and fracture in hard nano-coating Layers
Elisabeth Toups: Constitutive modelling of hyperelastic rubber-like materials considering damage
Stephan Wulfinghoff: Model order reduction of nonlinear homogenization problems using a Hashin-Shtrikman type finite element method
-
89th GAMM Annual Meeting
March 19-23, 2018, Munich (Germany)
Deadline for abstracts: December 4, 2017
Notification of acceptance: February 5, 2018
Oliver Barfusz: Solid-shell formulations based on reduced integration - investigations of anisotropic material behaviour at large deformations
Tim Brepols: A flexible two-surface gradient-extended damage-plasticity model
Fabiola Cavaliere: An efficient reduced computational method for nonlinear homogenization problems: the Hashin-Shtrikman type Finite Element method (HSFE)
Marek Fassin: A numerically robust gradient-extended anisotropic damage model
Sebastian Felder: A finite strain elasto-plastic material model incorporating kinematic and isotropic hardening for thermoplastic polymers
Julian Kochmann: Numerically robust two-scale FE-FFT-based modeling of finite strain elasto-viscoplasticity
Thank Thank Nguyen: Micromechanical Modeling of a Generator Stator Electrical Insulation System
Lukas Poggenpohl: A new material approach towards shear cutting of fiber reinforced plastics
Stefanie Reese: Similarities between the discontinuous Galerkin approach and reduced integration methods
Jaan Simon: Modeling the anisotropic in-plane and out-of-plane elastic-plastic response of paper
Elisabeth Toups: Constitutive modelling of hyperelastic rubber-like materials considering damage
Stephan Wulfinghoff: Model order reduction of nonlinear homogenization problems using a Hashin-Shtrikman type finite element method
-
5th GAMM Workshop Phase-Field Modeling
February 8-9, 2018, Dresden (Germany)
Deadline for abstracts: November 30, 2017
Notification of acceptance: December 31, 2017
-
International Conference on Plasticity, Damage, and Fracture 2018
January 3-9, 2018, Puerto Rico (USA)
Deadline for abstracts: May 1, 2017
Notification of acceptance: November 1, 2017
Stefanie Reese: Cyclic damage coupled with elasto-plasticity – anisotropic model and stability issues with respect to finite element technology
Tim Brepols: A micromorphic two-surface damage-plasticity model: theory and numerical aspects
Julian Kochmann: Numerically robust two-scale FE-FFT-based finite strain crystal plasticity simulations of polycrystalline materials
-
Thematic Workshop "Computational challenges for mechanical simulations based on digital image data"
December 6-7, 2017, Karlsruhe (Germany)
Julian Kochmann: Two-scale FE-FFT-based finite strain crystal plasticity simulations of polycrystalline materials
-
ECCOMAS Thematic Conference on Computational modeling of Complex Materials across the Scales (CMCS 2017)
November 7-9, 2017, Paris (France)
Deadline for abstracts: May 15, 2017
Notification of acceptance: June 30, 2017
Fabiola Cavaliere: Model-Order Reduction of Nonlinear Homogenization Problems using Hashin-Shtrikman Type Finite Element Scheme
Julian Kochmann: Numerically robust two-scale simulations of heterogeneous microstructures
-
11th International Conference "Shell Structures: Theory and Applications" (11th SSTA)
October 11-13, 2017, Gdańsk (Poland)
Deadline for abstracts (Paper): March 31, 2017
Notification of acceptance: June 10, 2017
Oliver Barfusz
Stefanie Reese
-
7th GACM Colloquium on Computational Mechanics
October 11-13, 2017, Stuttgart (Germany)
Deadline for abstracts: April 28, 2017
Notification of acceptance: June 30, 2017
Jaan Simon und Stephan Wulfinghoff: Organisation des Minisymposiums MS09: Damage Mechanics and Numerical Applications
Atefeh Alipour: Geometrically nonlinear single crystal viscoplasticity implemented in Discontinuous Galerkin framework
Johannes Neumann: Validation of a synthetic model of hot mix asphalt
Marek Fassin: A gradient-extended anisotropic damage model utilizing a micromorphic approach (Minisymposium MS09)
-
1st Eccomas Thematic Conference on Simulation for Additive Manufacturing (Sim-AM 2017)
October 11-13, 2017, Munich (Germany)
Deadline for abstracts: March 10, 2017
Notification of acceptance: April 7, 2017
Stefanie Reese
-
3rd International Conference on Multiscale Computational Methods for Solids and Fluids (ECCOMAS MSF 2017)
September 20-22, 2017, Ljubljana (Slovenia)
Deadline for abstracts: January 31, 2017
Notification of acceptance: March 1, 2017
Stefanie Reese: Member of the scientific committee
-
6th ECCOMAS Thematic Conference on the Mechanical Response of Composites
September 20-22, 2017, Eindhoven (Netherlands)
Deadline for abstracts: January 16, 2017
Notification of acceptance: March 16, 2017
Johannes Neumann: Mechanical and morphological validation of a synthetic model of asphalt concrete
Jaan Simon: Accounting for fiber bridging in cohesive zone modeling of facesheet to core delamination
-
4th ECCOMAS Young Investigators Conference and PhD Olympiad 2017 (YIC 2017)
September 13-15, 2017, Milano (Italy)
Deadline for abstracts: January 31, 2017
Notification of acceptance: March 3, 2017
Fabiola Cavaliere:A variationally-based model order reduction technique for nonlinear microstructures and efficient two-scale simulations of complex engineering structures
Katharina Martin: Simulation technologies for thermal buckling in aerothermodynamically loaded thin-walled structures
-
Computational Modelling of Multi-Uncertainty and Multi-Scale Problems (COMUS17)
September 12-14, 2017, Porto (Portugal)
Stefanie Reese: Plenary lecture
-
Deutscher Luft- und Raumfahrtkongress 2017 (DLRK2017)
September 5-7, 2017, Munich (Germany)
Deadline for abstracts: April 14, 2017
Notification of acceptance: Juni, 2017
Katharina Martin: Simulationsmethoden und experimentelle Validierung für thermisches Beulen dünnwandiger Strukturen unter aerothermodynamischen Lasten
-
14th International Conference on Computational Plasticity (COMPLAS 2017)
September 5-7, 2017, Barcelona (Spain)
Deadline for abstracts: January 29, 2017
Notification of acceptance: March 3, 2017
Marek Fassin: Mesh-objective description of isotropic/anisotropic damage with crack-closure and irreversible strains
Julian Kochmann: Two-scale FE-FFT-based computational modeling of the local and effective material behavior of viscoplastic polycrystals at finite strains
Stefanie Reese
-
20th International Conference on Composite Structures (ICCS20)
September 4-7, 2017, Paris (France)
Deadline for abstracts: March 31, 2017
Daniel Höwer: Numerical and experimental investigation of mode I facesheet to core delamination of sandwich panels exhibiting fiber bridging
-
Modern Finite Element Technologies - Mathematical and Mechanical Aspects (M-FET)
August 21-23, 2017, Bad Honnef, (Germany)
Deadline for abstracts: March 3, 2017
Notification of acceptance: April 14, 2017
Oliver Barfusz: Evaluation of layered structures using an efficient reduced integration-based solid-shell concept
Hamid Reza Bayat: On the comparison of 2D-3D non-conforming / discontinuous Galerkin methods with insight into locking problems
Stefanie Reese
-
21st International Conference on Composite Materials (ICCM-21)
August 20-25, 2017, Xi'an (China)
Deadline for abstracts: February 15, 2017
Notification of acceptance: February 31, 2017
Yujun Li: Anisotropic elastic-plastic modeling of paper
-
14th U.S. National Congress on Computational Mechanics (USNCCM14)
July 17-20, 2017, Montreal (Canada)
Deadline for abstracts: February 28, 2017
-
3rd International Conference on Mechanics of Composites (MECHCOMP3)
July 4-7, 2017, Bologne (Italy)
Deadline for abstracts: February 28, 2017
Jaan Simon: Modeling intralaminar damage progression and delamination in layered composites
-
36th IDDRG Conference - MATERIALS MODELLING AND TESTING FOR SHEET METAL FORMING (IDDRG 2017)
July 2-6, 2017, Munich (Germany)
Deadline for abstracts: February 15, 2017
Lukas Poggenpohl: Plasticity and damage with gradient enhancement: Application to high speed forming
-
5th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2017)
June 14-16, 2017, Nantes (France)
Deadline for abstracts: January 8, 2017
Notification of acceptance: March 1, 2017
Tim Brepols: A micromorphic damage-plasticity model and its application in mesh objective finite element simulations
Marek Fassin: Towards a mesh-objective description of anisotropic damage with crack-closure by means of a micromorphic formulation
Daniel Höwer: Modeling of mode I facesheet to core delamination of sandwich panels exhibiting fiber bridging by means of cohesive zone formulations
Stefanie Reese: Damage coupled with elastoplasticity – robustness and stability issues of a special finite element technolgy
-
5th International Conference on Material Modelling (ICMM5)
June 13-16, 2017, Rome (Italy)
Deadline for abstracts: February 1, 2017
Notification of acceptance: February 28, 2017
Lukas Poggenpohl
Stephan Wulfinghoff
-
DEFORMATION AND DAMAGE MECHANISMS OF WOOD-FIBRE NETWORK- MATERIALS AND STRUCTURES
June 7-9, 2017, Stockholm (Sweden)
Deadline for abstracts: February 20, 2017
Notification of acceptance: May 15, 2017
Jaan Simon: Anisotropic elastic-plastic deformation of paper: In-plane and out-of-plane model
Yujun Li: Network modeling of paper
-
French National Workshop on Structural Computation (CSMA 2017)
May 15-19, 2017, Giens (France)
Deadline for abstracts: October 30, 2016
Notification of acceptance: January 30, 2017
Stefanie Reese
-
Clausthal-Göttingen International Workshop on Simulation Science
April 27-28, 2017, Göttingen (Germany)
Deadline for abstracts: January 20, 2017
Johannes Neumann: Validation of a synthetic 3D mesoscale model of hot mix asphalt
-
International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2017)
April 24-28, 2017, San Diego (USA)
Deadline for abstracts: October 1, 2016
Shahed Rezaei
-
2nd Exploratory Workshop on Applications of Model Order Reduction Methods in Industrial Research and Development
March 10, 2017, Luxembourg (Luxemburg)
Lei Zhou: Model order reduction on the substructure level applied in nonlinear static and dynamic analysis
-
88th GAMM Annual Meeting (GAMM 2017)
March 6-10, 2017, Weimar (Germany)
Deadline for abstracts: December 20, 2016
Atefeh Alipour: A new regularization technique for geometrically nonlinear crystal plasticity implemented into a new discontinuous Galerkin (DG) element formulation
Oliver Barfusz: Numerical investigations of CMC nozzle structures:constitutive modelling and finite element technology
Hamid Reza Bayat: Discontinuous Galerkin method in 3D linear elasticity with application in problems with locking
Rex Bedzra: Multi-scale modelling of fiber reinforced composites exhibiting elastoplastic deformation
Tim Brepols: A gradient-extended damage-plasticity model to counteract mesh-dependence in finite element simulations
Julian Kochmann: A two-scale FE-FFT- and phase-field-based model for fully coupled thermomechanical problems with heterogeneous and evolving microstructures
Lukas Poggenpohl: Shear cutting of carbon fiber reinforced plastics
Stefanie Reese
Shahed Rezaei: Application and parameter identification of cohesive zone elements for intergranular fracture in thin layer
Jaan Simon: A continuum model for intralaminar damage progression and delamination in layered composites
Stephan Wulfinghoff: Investigation of a locking-free hybrid discontinuous Galerkin element that is very easy to implement into FE-codes
-
Doctoral Workshop on Model Reduction in nonlinear mechanics
February 13-17, 2017, Paris (France)
Lei Zhou
-
4th GAMM Workshop – Phase Field Modeling
February 2-3, 2017, Aachen (Germany)
Deadline for abstracts: December 15, 2016
Julian Kochmann: A multiscale FE-FFT- and phase-field-based model for the prediction of micromechanical fields and the overall material behavior of viscoplastic polycrystals
-
24th Conference on Computer Methods in Materials Technology (KomPlasTech 2017)
January 15-18, 2017, Zakopane (Poland)
Deadline for abstracts: October 10, 2016
Notification of acceptance: October 31, 2016
Stefanie Reese: Plenary lecture on "Multiscale modeling - advantages and challenges in the context of manufacturing processes"
-
3rd Workshop on Model Reduction of Complex Dynamical Systems (MODRED 2017)
January 11-13, 2017, Odense (Denmark)
Deadline for abstracts: October 28, 2016
Notification of acceptance: November 18, 2016
Lei Zhou: A novel POD-based model order reduction at the substructure level for nonlinear structural analysis
-
Special Workshop - Multiscale Modeling of Heterogeneous Structures
September 21-23, 2016, Dubrovnik (Croatia)
Deadline for abstracts: April 30, 2016
Notification of acceptance: May 31, 2016
Rex Bedzra
Tim Brepols
Julian Kochmann
-
15th European Mechanics of Materials Conference (EMMC15)
September 7-9, 2016, Brussel (Belgium)
Deadline for abstracts: March 30, 2016
Hamid Reza Bayat
Rex Bedzra
Marek Fassin
Shahed Rezaei
Jaan Simon
-
19th International Conference on Composite Structures (ICCS19)
September 5-9, 2016, Porto (Portugal)
Deadline for abstracts: January 31, 2016
Stefanie Reese: Plenary lecture
-
10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2016)
September 4-9, 2016, Bristol (England)
Deadline for abstracts: January 31, 2016
Notification of acceptance: February 15, 2016
-
24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016)
August 21-26, 2016, Montréal (Canada)
Deadline for abstracts: January 15, 2016
Notification of acceptance: April 15, 2016
Rex Bedzra
Julian Kochmann
Stefanie Reese
-
12th World Congress on Computational Mechanics & 6th Asia-Pacific Congress on Computational Mechanics (WCCM XII & APCOM VI)
July 24-29, 2016, Seoul (Korea)
Deadline for abstracts: November 30, 2015
Notification of acceptance: January 30, 2016
Stefanie Reese
-
2nd International Conference on Mechanics of Composites
July 11-14, 2016, Porto (Portugal)
Deadline for abstracts: October 1, 2015
Yujun Li: Multiscale modeling of paper
Jaan Simon: Modeling delamination of CFRP laminates in mode I and mode II
-
17th European Conference for Composite Materials (ECCM17)
June 26-30, 2016, Munich (Germany)
Deadline for abstracts: November 16, 2015
Notification of acceptance: February, 2016
Yujun Li: Multiscale modeling of paper
-
European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016)
June 5-10, 2016, Crete Island (Greece)
Deadline for abstracts: November 29, 2015
Hamid Reza Bayat
Jaan Simon: Minisymposium organizer (MS 614 Young Investigators Minsymposium), "Modeling mode I and mode II delamination in CFRP laminates"
Johannes Wimmer: Multi-Scale Modelling of Asphalt Concrete
Marek Fassin
-
International Conference on Computational Methods in Manufacturing Processes (ICOMP 2016)
May 18-20, 2016, Liège (Belgium)
Deadline for abstracts: January 5, 2016
Notification of acceptance: February 15, 2016
Stefanie Reese: Plenary lecture on "Simulation of manufacturing processes – phase field method, model order reduction and beyond"
-
19th European Scientific Association for Material Forming Conference (ESAFORM 2016)
April 27-29, 2016, Nantes (France)
Deadline for abstracts: November 15, 2015
Notification of acceptance: January 15, 2016
Yinan Zuo
-
Mechanics of Materials: Mechanics of Interfaces and Evolving Microstructure
March 13-19, 2016, Oberwolfach (Germany)
Stefanie Reese
-
Data-driven Model Order Reduction and Machine Learning (MORML 2016)
March 30 - April 1, 2016, Stuttgart (Germany)
Deadline for abstracts: December 15, 2015
Notification of acceptance: January 15, 2016
Lei Zhou: Nonlinear POD-based Model Order Reduction on the substructures with bonded contact for the interface coupling problems
-
Joint Annual Meeting of GAMM and DMV (GAMM 2016)
March 7-11, 2016, Braunschweig (Germany)
Deadline for abstracts: December 18, 2015
Hamid Reza Bayat
Tim Brepols
Julian Kochmann
Stefanie Reese
Shahed Rezaei
Stephan Wulfinghoff
Yinan Zuo
-
European-Latin-American Conference of Theoretical and Applied Mechanics (ELACTAM 2016)
February 22-24, 2016, Havana (Cuba)
Deadline for abstracts: December 15, 2015
Jaan Simon: Modeling damage in carbon fiber reinforced composites on different scales
-
FE im Schnee
February 28 - March 3, 2016, Hirschegg (Austria)
Daniel Höwer
Johannes Wimmer
Stephan Wulfinghoff
-
Reduced Basis, POD and PGD Model Reduction Techniques
November 4-6, 2015, Cachan (France)
Deadline for abstracts: June 1, 2015
Stefanie Reese: Displacement-based multiscale modeling and substructuring by means of POD
-
International Conference on Biomedical Technology (ICBT 2015)
October 28-30, 2015, Hannover (Germany)
Deadline for abstracts: July 3, 2015
Stefanie Reese
Deepanshu Sodhani: Effect of reinforcement volume fraction and orientation on a hybrid tissue engineered aortic heart valves with a tubular leaflet design
-
Oberwolfach Workshop "Computational Engineering"
September 27 - October 3, 2015, Oberwolfach (Germany)
-
eXtended Discretization MethodS (X-DMS 2015)
September 9-11, 2015, Ferrara (Italy)
Deadline for abstracts: April 14, 2015
Notification of acceptance: April 30, 2015
Stefanie Reese: Plenary lecture on "Finite element technology using reduced integration - investigations of stability and model adaptivity"
-
The 9th European Conference on Constitutive Models for Rubbers (ECCMR IX)
September 1-4, 2015, Prague (Czech rep.)
Deadline for abstracts: December 31, 2014
Notification of acceptance: January 31, 2015
Deepanshu Sodhani: Evaluation of strain amplification concepts using full field FE simulations of an ideal carbon black filled elastomer
-
XIII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XIII)
September 1-3, 2015, Barcelona (Spain)
Deadline for abstracts: January 15, 2015
Notification of acceptance: May 16, 2015
Yalin Kiliclar: The influence of combined sheet metal forming on the increasing formability by experimental and numerical investigations
Stefanie Reese: Plenary lecture on "Computational Inelasticity at Different Scales - From Microstructure to Model Reduction"
Stephan Wulfinghoff: Efficient Computational Homogenization of Simple Elasto-Plastic Microstructures Using a Modified Ritz-Galerkin Approach
-
IASS2015 Annual International Symposium on Future Visions (IASS2015)
August 17-20, 2015, Amsterdam (Netherlands)
Deadline for abstracts: February 28, 2015
Notification of acceptance: March 31, 2015
Lei Zhou: A computationally efficient numerical method for the design and analysis of a geodesic dome using modular plane shell substructures
-
3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics (YIC GACM 2015)
July 20-23, 2015, Aachen (Germany)
Deadline for minisymposia submission: October 24, 2014
Deadline for abstracts: January 16, 2015
Notification of acceptance: March 6, 2015
Conference Chairmen: Stefanie Elgeti, Jaan Simon
Evan Pineda, Bertram Stier: Organization of the minisymposium "Multiscale Modeling and Experimental Investigation of Damage Mechanisms in Composite Materials"
Hamid Reza Bayat: Discontinuous Galerkin analysis of displacement discontinuities for linear elasticity
Rex Bedzra: Micro-macro modelling of fiber reinforced composites exhibiting elastoplastic deformation within the framework of multisurface plasticity
Tim Brepols: Examination of an implicit gradient-enhanced damage model coupled to elastoplasticity
Daniel Höwer: Mode I and II delamination modelling and comparison to experiments
Yalin Kiliclar: Virtual process design on combined quasi-static and high-speed forming processes
Julian Kochmann: Microscopic phase-field modeling of microstructure evolution combined with the finite element method in a homogenization-based framework
Annika Radermacher: Proper orthogonal decomposition-based model reduction in nonlinear solid mechanics
Shahed Rezaei: Prediction of the fracture behavior in nano-laminated structures using a cohesive zone element technique
Deepanshu Sodhani: Micomechanical full field modelling of multiphase particle reinforced elastomer
Scott Stapleton: Adaptive shape functions to capture material softening in coarse-mesh adhesively bonded joint models
Bertram Stier: On the interaction of damage mechanisms in composite materials
Lei Zhou: Shell structure design withmodel order reduction and substructuretechniques
-
The Second International Conference on Damage Mechanics (ICDM2)
July 8-10, 2015, Troyes (France)
Deadline for abstracts: September 30, 2014
Notification of acceptance: October 31, 2014
Marek Fassin: Lifetime analysis of a rocket combustion chamber wall by means of a viscoplastic material model coupled with anisotropic damage
Stephan Wulfinghoff: On anisotropic and gradient-enhanced damage coupled to plasticity
-
9th European Solid Mechanics Conference (ESMC 2015)
July 6-10, 2015, Madrid (Spain)
Deadline for abstracts: November 15, 2014
Notification of acceptance: January 15, 2015
Stefanie Reese, Ferdinando Auricchio, Claire Davis: Organization of the minisymposium "Shape memory alloys - modeling, numerical algorithms and applications"
Tim Brepols: Implicit gradient-enhanced damage coupled to plasticity
Daniel Höwer: CFRP Mode I and II delamination behaviour - a comparison of experimental data to numerical models
Julian Kochmann: Microscopic phase-field modeling of martensitic phase transformations in a FE²-framework
Stefanie Reese: Anisotropic damage coupled with viscoplasticity - model development and finite element implmentation
Shahed Rezaei: Modeling of the fracture behavior in laminated structures based on a cohesive zone element technique
Johannes Wimmer: A 3D Mesomechanical Model of Asphalt Concrete
Li Yujun: Delamination in the creasing of paperboard
Lei Zhou: Model order reduction through combination of proper orthogonal decomposition and substructuring techniques
-
6th European Conference for Aeronautics and Space Sciences (EUCASS 2015)
June 29 - July 3, 2015, Krakow (Poland)
Deadline for abstracts: February 15, 2015
Notification of acceptance: March, 2015
Marek Fassin: Application of a viscoplastic material model coupled with anisotropic damage for the failure prediction of a rocket combustion chamber wall
-
European Polymer Federation 2015 (EPF2015)
June 21-26, 2015, Dresden (Germany)
Deadline for abstracts: January 15, 2015
Notification of acceptance: March 16, 2015
Deepanshu Sodhani: Finite element based full field micromechanical modeling of stress softening in filler reinforced elastomers
-
18th International Conference on Composite Structures (ICCS18)
June 15-18, 2015, Lisbon (Portugal)
Deadline for abstracts: October 1, 2014
Bertram Stier: Investigation of the interaction of damage mechanisms in composite materials
Li Yujun: Experimental and numberical investigation of paperbaord creasing
-
2nd International Conference on Multi-scale Computational Methods for Solids and Fluids (ECCOMAS MSF 2015)
June 10-12, 2015, Sarajevo (Bosnia and Herzegovina)
Deadline for abstracts: November 15, 2014
Notification of acceptance: December 31, 2014
Jaan Simon: Meso-mechanically motivated modeling of layered CFRP accounting for delamination
-
4th International Conference on Material Modeling (ICMM4)
May 27-29, 2015, Berkeley, CA (USA)
Deadline for abstracts: January 1, 2015
Stefanie Reese: Anisotropic damage coupled with plasticity - model development & FE implementation
Jaan Simon: Multiscale modeling of the damage behavior of textile composites
Deepanshu Sodhani: Finite element based full field micromechanical modeling of stress softening in filler reinforced elastomers
-
12th International Conference on Textile Composites (TEXCOMP-12)
May 26-29, 2015, Raleigh, NC (USA)
Deadline for abstracts: November 15, 2014
Notification of acceptance: February 1, 2015
Scott Stapleton: The effect of fiber-scale parameters on homogenized properties of dry carbon fiber tows
-
1st. Pan-American Congress on Computational Mechanics (PANACM 2015)
April 27-29, 2015, Buenos Aires (Argentine)
Alain Combescure, Stefanie Reese, Herbert A. Mang: Organization of the minisymposium "Computational Stability Analysis of Structures"
-
18th International ESAFORM Conference on Material Forming (ESAFORM 2015)
April 15-17, 2015, Graz (Austria)
Deadline for abstracts: September 15, 2014
Yalin Kiliclar: Numerical optimization of current parameters in combined electromagnetic-classical forming processes
-
International Conference on Advances in Composite Materials and Structures (CACMSIstanbul2015)
April 13-15, 2015, Istanbul (Turkey)
Deadline for abstracts: September 15, 2014
Daniel Höwer: Comparison of numerical results of a 3-D model accounting for mode I and II delamination with experiments
-
3rd German-Japanese Workshop on Computational Mechanics
March 30-31, 2015, München (Germany)
Jaan Simon: Micro- and Meso-scale Modeling of Damage in Textile Composites
-
86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2015)
March 23-27, 2015, Lecce (Italy)
Deadline for abstracts: December 19, 2014
Hamid Reza Bayat: Application of Discontinuous Galerkin Finite Element Method for Discontinuities in Small Deformation Regimes
Rex Bedzra: Micro-Meso modeling of fiber-reinforced composites exhibiting elastoplastic deformation
Tim Brepols: Investigation of an elastoplastic material model coupled to nonlocal damage in an implicit-gradient framework
Julian Kochmann: Phase-field modeling of martensitic phase transformations in polycrystals coupled with crystal plasticity
Stefanie Reese
Shahed Rezaei: Application of a cohesive zone element for prediction of damages in laminated structures
Jaan Simon: Predicting delamination in multilayered CFRP laminates
Scott Stapleton: Representative Volume Element Size Convergence for a Parallel Fiber Bundle Micro-Model
Stephan Wulfinghoff: On Anisotropic and Nonlocal Damage Models
-
IUTAM Symposium on "Plastic Localization and Ductile Failure"
March 17-20, 2015, Paris (France)
Stefanie Reese
-
Euromech colloquium 559 "Multi-scale computational methods for bridging scales in materials and structures"
February 23-25, 2015, Eindhoven (Netherlands)
Deadline for abstracts: January 31, 2015
Julian Kochmann: Phase-field modeling of martensitic phase transformations in polycrystals based on fast Fourier transforms in a homogenization-based framework
- GAMM seminar on phase-field modeling 2015
February 5-6, 2015, Siegen (Germany)
Deadline for abstracts: December 31, 2014
Julian Kochmann: Phase-field modeling of martensitic phase transformations coupled with crystal plasticity
-
Plasticity, Damage & Fracture 2015
January 4-9, 2015, Montego Bay (Jamaica)
Deadline for abstracts: August 1, 2014
Jaan Simon: Modeling of damage in textile composites on different scales
-
27th International Workshop Research in Mechanics of Composites
December 11-12, 2014, Bad Herrenalb (Germany)
Deadline for tentative title: October 15, 2014
Notification of acceptance: November 1, 2014
Deadline for abstracts: November 15, 2014
Jaan Simon: Multi-scale Modeling of Damage in Textile Composites
-
11th Fall Rubber Colloquium (KHK 2014)
November 26-28, 2014, Hannover (Germany)
Deadline for abstracts: March 1, 2014
Notification of acceptance: June 1, 2014
Deepanshu Sodhani: Finite element based micromechanical modeling of phase interaction in filler reinforced elastomers
-
Metal Forming 2014
September 21-24, 2014, Palermo (Italy)
Deadline for abstracts: October 31, 2013
Notification of acceptance: November 15, 2013
Reza Kebriaei: Scale transition in multiscale modelling of joining processes
Yalin Kiliclar: Combined quasi-static-electromagnetic forming process - Material modelling, increasing formability and damage treatment
-
14th European Mechanics of Materials Conference (EMMC14)
August 27-29, 2014, Gothenburg (Sweden)
Deadline for abstracts: April 15, 2014
Julian Kochmann: Fourier-transform based phase-field model coupled with the finite element method
Deepanshu Sodhani: Finite element analysis of the microstructural evolution of elastomeric nano-composites
-
11th. World Congress on Computational Mechanics (WCCM XI, ECCM V, ECFD VI)
July 20-25, 2014, Barcelona (Spain)
Deadline for abstracts: November 29, 2013
Notification of acceptance: January 31, 2014
Tiago Grilo: Modelling non-quadratic anisotropic yield criteria at finite strains with mixed isotropic-nonlinear kinematic hardening: application to sheet metal forming
Daniel Höwer: Finite Element Technology for Steel-Elastomer-Sandwiches
Stefanie Reese, Ferdinando Auricchio, Manfred Bischoff, Peter Wriggers: Minisymposium on "Stability issues of finite elements in non-linear solid mechanics"
Stefanie Reese: Reduced integration with hourglass stabilization - issues of stability and robustness
Jaan Simon: Modeling the creasing process of paperboard
Ivaylo Vladimirov, Robertt Valente, Ricardo Sousa, Myoung-Gyu Lee: Minisymposium on "Advances in constitutive modelling of metal forming processes across different lengthscales"
-
8. GAMM-Seminar on Multiscale Material Modeling
July 3-5, 2014, Hamburg (Germany)
Deadline for abstracts: May 15, 2014
Julian Kochmann: Spectral-based phase-field modeling coupled with the finite element method in a multiscale framework
Jaan Simon: Multiscale modeling of laminated composites with textile reinforcement
-
1st International Workshop on Software Solutions for Integrated Computational Materials Engineering (ICMEg)
June 24-27, 2014, Rolduc Abbey (Netherlands)
Deadline for abstracts: April 1, 2014
Tim Brepols: Hypo- and hyperelastic-based approaches in finite strain elastoplasticity with application to industrial forming processes
-
6th international conference on tribology in manufacturing processes & joining by plastic deformation (ICTMP)
June 22-24, 2014, Darmstadt (Germany)
Deadline for abstracts: August 30, 2013
Reza Kebriaei: Multiscale modeling of joining processes with application to roll bonding
Stefanie Reese: Introduction to simulation of joining processes
-
17th US National Congress on Theoretical and Applied Mechanics (USNCTAM)
June 15-20, 2014, East Lansing, Michigan (USA)
Deadline for abstracts: January 6, 2014
Notification of acceptance: January 15, 2014
Bertram Stier: Modeling of damage at the meso- and micro-scale in textile composites
Robertt Valente, Ivaylo Vladimirov, Myoung-Gyu Lee, Ricardo Sousa: Minisymposium on "Advances in constitutive modelling of metal forming processes across different lengthscales"
Karen Veroy-Grepl, Stefanie Reese: Minisymposium on "Model order reduction for mechanics and materials"
-
Mechanics of Composites (MECHCOMP2014)
June 8-12, 2014, Long Island, NY State (USA)
Deadline for abstracts: October 30, 2013
Jaan Simon: Meso-mechanically motivated modeling of layered fiber reinforced composites accounting for delamination
-
14th Dresden Polymer Discussion
May 25-28, 2014, Meißen (Germany)
Deadline for abstracts: November 11, 2013
Stefanie Reese: Invited lecture on "Finite element micro-field simulation illustrating the effect of micro-structure morphology on stress softening in filled elastomer networks"
- Arbeitskreis Stoffgesetze 2014
May 23, 2014, Geesthacht (Germany)
Deadline for title of presentation: May 2, 2014
Tim Brepols: Anwendungen von hypo- und hyperelastisch-basierten Modellen finiter Elastoplastizität in der Umformtechnik
Marek Fassin: Lebensdauervorhersage einer Raketenbrennkammer mit einem viskoplastischen Schädigungsmodell
-
Esaform 2014
May 7-9, 2014, Espoo (Finland)
Deadline for abstracts: October 1, 2013
Notification of acceptance: November 15, 2013
Tiago Grilo: Modelling non-quadratic anisotropic yield criteria and mixed isotropic-nonlinear kinematic hardening at finite strains
Reza Kebriaei: Multiscale modeling of joining processes under consideration of the thermo-mechano-chemical behaviour in the interface
Elias Cueto, Francisco Chinesto, Renator Natal Jorge, Stefanie Reese: Minisymposium on "New and advanced numerical strategies for material forming"
Ivaylo Vladimirov: On the use of explicit and implicit exponential map algorithms of finite strain combined hardening plasticity in the simulation of draw bending
Ricardo Sousa, Ivaylo Vladimirov, Laurent Duchene, Tuncay Yalcinkaya: Minisymposium on "Computational techniques and multi-scale methods for composites, metallic sheets and coating models"
-
GAMM 2014
March 10-14, 2014, Erlangen (Germany)
Deadline for abstracts: December 13, 2013
Marek Fassin: Lifetime Predicition of a Rocket Combustion Chamber Wall by a viscoplastic-damage model
Julian Kochmann: 3D elasto-plastic phase-field simulation of martensite phase transformation in polycrystals
Li Yujun: Experimental and numerical investigation of paperboard creasing
Stefanie Reese: Plenary lecture on "Scale transitions in multi-field problems - application in production technology and biomechanics"
Johannes Wimmer: Modelling and Simulation of Asphalt Concrete Using Voronoi Tesselations
-
International Symposium on Plasticity and its Current Applications
January 3-8, 2014, Freeport (Bahamas)
Deadline for abstracts: June 1, 2013
Stefanie Reese: Keynote lecture on "Finite element based modeling to demonstrate the influence of micro-mechanical phase interactions on filler reinforced elastomers"
-
International Conference on Biomedical Technology (ICBT) 2013
November 20-22, 2013, Hannover (Germany)
Deadline for abstracts: September 22, 2013
Stefanie Reese: Modeling of stents by means of a new solid-beam finite element technology
Stefanie Reese, Felix Vogt, Marek Behr: Minisymposium on "Biomedical and modeling aspects of stent implants"
-
2nd International Workshop on Reduced Basis, POD and PGD
November 3-6, 2013, Blois (France)
Deadline for abstracts: June 1, 2013
Stefanie Reese: POD-based model reduction in biomechanics and forming processes
Annika Radermacher: Sub-structuring combined with POD - applied to incremental sheet metal forming simulations
