Hilfsnavigation

IFAM-Logo

Zielgruppennavigation

 

Inhalt

Presentations (716)

 

  • C. Gierden, J. Waimann, B. Svendsen, S. Reese; "FFT-based simulation using a reduced set of frequencies adapted to the underlying microstructure"; XXVII Conference on Computer Methods in Materials Technology (Virtual Conference); March 2021;
  • C. Gierden, J. Waimann, B. Svendsen, S. Reese; "A model order reduction technique for FFT-based microstructure simulation using a geometrically adapted reduced set of frequencies"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • T. van der Velden, B. Rommes, A. Klink, S. Reese, J. Waimann; "Efficient modeling of material dissolution in electrochemical machining"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • O. Barfusz, T. van der Velden, T. Brepols, S. Reese; "Reduced integration-based solid and solid-shell finite elements for gradient-extended damage"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • L. Lamm, H. Holthusen, C. Böhm, S. Jockenhövel, S. Reese; "Macroscopic modelling of stress driven anisotropic growth in bioengineered tissues"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • J. Waimann, C. Gierden, A. Schmidt, B. Svendsen, S. Reese; "FFT-based homogenization using a reduced set of frequencies and a clustered microstructure"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • J. Waimann, K. Hackl, S. Reese, P. Junker; "Irreversible effects during phase transformations (Poster)"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • H. Holthusen, T. Brepols, S. Reese, J.-W. Simon; "Modeling the damage progression of fiber-reinforced composites using a gradient-extended damage model accounting for finite strains"; 14th WCCM & ECCOMAS Congress (Virtual Conference); January 2021;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended damage-plasticity model for finite deformations"; 14th WCCM & ECCOMAS Congress (Virtual Conference); January 2021;
  • H. R. Bayat, A. R. Harandi, S. Rezaei, T. Brepols, S. Reese; "Modeling of failure at the interface of ductile materials by applying the cohesive discontinuous Galerkin method"; 24th International Conference on Material Forming (ESAFORM) (Virtual Conference); April 2021;
  • E. Prume, G. Kloppenburg, S. Felder, J.-W. Simon; "A constitutive framework for paperboard accounting for anisotropy and compressible plasticity at finite strains"; Progress in Paper Physics Seminar, Jyväskylä (Finland); September 2020;
  • G. Kloppenburg, H. Holthusen, Y. Li, J.-F. Bloch, U. Hirn, J.-W. Simon; "Numerical investigation of paper using the concept of representative volume elements characterized by single fiber behavior and fiber-fiber interaction"; Progress in Paper Physics Seminar, Jyväskylä (Finland); September 2020;
  • David Jaworek, Christian Gierden, Tobias Kinner-Becker, Johanna Waimann, Stefanie Reese; "Modeling material modifications using a process independent approach"; 23rd International Conference on Material Forming (ESAFORM); May 2020;
  • H. Holthusen, T. Brepols, S. Reese, J.-W. Simon; "A gradient-extended damage model for transversal isotropic materials with plasticity: Micromorphic formulation and numerical implementation"; Ski-Seminar, Val-d'Illiez (Switzerland); February 2020;
  • M. Reuvers, T. Guo, S. Rezaei, T. Brepols, S. Reese; "A thermomechanical interface formulation describing separation in ceramic matrix composites"; Seminar im Rahmen des GRK 2078, Karlsruhe Institute of Technology (KIT); February 2020;
  • O. Barfusz, T. Brepols, S. Reese; "Reduced integration-based finite element technologies for gradient-extended damage"; Ski-Seminar, Val-d'Illiez (Switzerland); February 2020;
  • S. Felder, H. Holthusen, S. Hesseler, F. Pohlkemper, J.-W. Simon, T. Gries, S. Reese; "Modeling the crystallization kinetics and thermo-mechanical behavior of semi-crystalline polymers"; Ski-Seminar, Val-d'Illiez (Switzerland); February 2020;
  • S. Reese, S. Rezaei, T. Brepols, J. R. Mianroodi, M. Fassin; "Multiscale modeling of plasticity-coupled damage - from MD to anisotropic continuum mechanics"; International Conference on Plasticity, Damage, and Fracture 2020 (ICPDF), Rivera Maya (Mexico); January 2020;
  • S. Reese, R. Eggersmann, L. Stainier, M. Ortiz; "DD mechanics - the end of classical constitutive modeling?"; Superalloy Data Science - Acquisition, Storage, Mining and Machine Learning, Bochum (Germany); January 2020;
  • L. Lamm, S. Jockenhövel, S. Reese; "On the computational modeling of bioengineered soft collagenous tissues for the use in biohybrid aortic valve implants"; IV. International Conference on Biomedical Technology 2019, Hannover (Germany); November 2019;
  • S. Reese, R. Eggersmann, S. Kastian, T. Kirchdoerfer, L. Stainier, M. Ortiz; "DD mechanics, MOR, and HTA - suitable methods to cross the scales?"; keynote lecture, Computational modeling of Complex Materials across the Scales (CMCS 2019), Glasgow (UK); October 2019;
  • J. Waimann, K. Hackl, P. Junker; "Irreversible effects in cycled shape memory alloys - a variational material model and finite-element investigations"; ECCOMAS 5th Young Investigators Conference, Kraków (Poland); September 2019;
  • S. Reese, S. Rezaei, M. Fassin, L. Poggenpohl, J. R. Mianroodi, T. Brepols, S. Wulfinghoff; "Atomistically motivated interface modeling to account for coupled plasticity and damage"; XV International Conference on Computational Plasticity (COMPLAS 2019), Barcelona (Spain); September 2019;
  • S. Felder, H. Holthusen, S. Hesseler, F. Pohlkemper, J.-W. Simon, T. Gries, S. Reese; "A finite strain, thermo-mechanically coupled material model for semi-crystalline polymers, incorporating crystallisation kinetics."; XV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelona (Spain); September 2019;
  • S. Kastian, S. Reese; "An adaptive approach of proper orthogonal decomposition to capture non-linearities with a small number of modes"; 15th International Conference on Computational Plasticity (COMPLAS 2019), Barcelona (Spain); September 2019;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended damage-plasticity model for large deformations: theory and numerical aspects"; 15th International Conference on Computational Plasticity (COMPLAS 2019), Barcelona (Spain); September 2019;
  • O. Barfusz, T. Brepols, S. Reese; "Gradient-extended damage modeling with reduced integration-based continuum elements"; 15th International Conference on Computational Plasticity (COMPLAS 2019), Barcelona (Spain); September 2019;
  • D. Höwer, B. A. Lerch, B. A. Bednarcyk, E. J. Pineda, S. Reese, J.-W. Simon; "Modeling of honeycomb core sandwich panels undergoing interfacial crack propagation"; 7th ECCOMAS Thematic Conference on The Mechanical Response of Composites, Girona (Spain); September 2019;
  • C. Gierden, J. Kochmann, J. Waimann, B. Svendsen, S. Reese; "Microstructural convergence analysis as basis for an efficient and accurate two-scale FE-FFT-based simulation approach"; 8th GACM Colloquium on Computational Mechanics, Kassel (Germany); August 2019;
  • J. Waimann, K. Hackl, P. Junker; "Variational modeling of irreversible effects in cycled polycrystalline shape memory alloys"; 8th GACM Colloquium on Computational Mechanics, Kassel (Germany); August 2019;
  • S. Reese, O. Barfusz, T. Brepols; "Reduced integration-based continuum elements for gradient-extended damage and fracture"; Modern Finite Element Technologies 2019 (MFET), Bad Honnef (Germany); July 2019;
  • H. R. Bayat, P. Schreyer, S. Rezaei, S. Reese; "Locking-free interface failure modeling applying cohesive discontinuous Galerkin method for matching and non-matching meshes"; ECCOMAS Thematic Conference on Modern Finite Element Technologies (MFET), Bad Honnef (Germany); July 2019;
  • D. Höwer, B. A. Lerch, B. A. Bednarcyk, E. J. Pineda, S. Reese, J.-W. Simon; "Modeling of delamination with bridging fibers in sandwich panels made of aluminum honeycomb core and CFRP facesheets"; 5th International Conference on Mechanics of Composites, Lisboa (Portugal); July 2019;
  • C. Gierden, J. Kochmann, J. Waimann, B. Svendsen, S. Reese; "Efficient and accurate two-scale FE-FFT-based prediction of polycrystalline material behavior at finite strains"; ECCOMAS Thematic Conference on Computational Methods in Multi-scale, Multi-uncertainty and Multi-physics Problems (CM4P), Porto (Portugal); July 2019;
  • S. Kastian, S. Reese; "An efficient possibility of uncertainty quantification with the adaptive proper orthogonal decomposition (APOD)"; UNCECOMP 2019, Crete (Greece); June 2019;
  • J. Waimann, K. Hackl, S. Reese, P. Junker; "Variational material modeling of the transformation induced plasticity in polycrystalline steel"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • M. Reuvers, S. Rezaei, T. Brepols, S. Reese; "Development of a thermomechanically coupled damage approach for modeling woven ceramic matrix composites"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • S. Rezaei, J. R. Mianroodi, S. Reese; "A method for modeling intergranular fracture and grain boundary sliding"; 6th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019), Braunschweig (Germany); June 2019;
  • S. Felder, N. A. Vu, S. Reese, J.-W. Simon; "Material modelling and experimental investigation of semi-crystalline polymers at finite strains for varying degrees of crystallinity"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • E. Toups, R. Seewald, B. Schaaf, U. Reisgen, M. Feldmann, J.-W. Simon, S. Reese; "Modelling of hyperelastic material accounting for the Mullins effect"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended damage-plasticity model for large deformations with combined nonlinear hardening"; 6th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019), Braunschweig (Germany); June 2019;
  • A. Alajami, Y. Li, J.-W. Simon; "Modellierung des anisotrop elastisch-plastischen Materialverhaltens von Papier"; AK Stoffgesetze, Berlin (Germany); June 2019;
  • D. Jaworek, J. Waimann, S. Wulfinghoff, S. Reese; "A Hashin-Shtrikman type semi-analytical homogenization procedure in multiscale modeling to account for coupled problems"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • K. Martin, S. Reese; "Thermo-mechanically coupled fluid structure interaction for thermal buckling"; Coupled Problems 2019, Sitges (Spain); June 2019;
  • S. Reese, S. Rezaei, M. Fassin, L. Poggenpohl, J. R. Mianroodi, T. Brepols, S. Wulfinghoff; "Atomistically motivated interface modeling to account for coupled plasticity and damage"; plenary lecture, 6th edition of International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019), Braunschweig (Germany); June 2019;
  • S. Reese, R. Eggersmann, T. Kirchdoerfer, L. Stainier, M. Ortiz; "Data-driven mechanics – an alternative to constitutive modeling?"; 6th International Conference on Material Modelling (ICMM6), Lund (Sweden); June 2019;
  • S. Reese, S. Rezaei, M. Fassin, J. R. Mianroodi, T. Brepols, S. Wulfinghoff; "Damage modeling at various scales – from atomistic findings to anisotropic continuum mechanics"; Khalifa University, Abu Dhabi (UAE); May 2019;
  • R. Eggersmann, T. Kirchdoerfer, L. Stainier, M. Ortiz, S. Reese; "A general approach for model-free data-driven inelasticity"; 5th GAMM AG Data Workshop - New Challanges in Data-Driven Modelling, Aachen (Germany); May 2019;
  • A. Alajami, Y. Li, G. Kloppenburg, J.-W. Simon; "Evaluating the mechanical response of fiber networks with RVEs"; International Paper Physics Conference in conjunction with PaperCon 2019, Indianapolis (USA); May 2019;
  • K. Khaledi, L. Poggenpohl, T. Brepols, S. Reese; "Application of a locking-free element in modeling of joining by clinching"; 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz (Spain); May 2019;
  • S. Kastian, S. Reese; "Usage of data to create efficient surrogate models and low-rank approximations"; GAMM AG Data 2019, Aachen (Germany); May 2019;
  • S. Reese, S. Rezaei, M. Fassin, J. R. Mianroodi, T. Brepols, S. Wulfinghoff; "Damage modeling at various scales - from atomistic findings to anisotropic continuum mechanics"; Colloquium at University of Technology of Troyes, Troyes (France); April 2019;
  • S. Reese, H. Bayat, O. Barfusz, S. Wulfinghoff; "On the equivalence between dG and reduced integration with hourglass stabilization"; Euromech Colloquium 600: New challenges in finite element technology, Aachen (Germany); March 2019;
  • M. Fassin, E. Prume, R. Eggersmann, S. Wulfinghoff, S. Reese; "Efficient and reliable development of anisotropic damage models by means of AceGen"; Research Challenges in Mechanics (RCM): Novel Methods and Applications for Automated Computational Modeling, Hannover (Germany); March 2019;
  • H. R. Bayat, P. Schreyer, S. Rezaei, S. Reese; "Crack propagation modeling applying cohesivediscontinuous Galerkin method - Does locking matter?"; EuroMech Colloquium 600, 2019, Aachen (Germany); March 2019;
  • R. Eggersmann, S. Reese, L. Stainier, M. Ortiz; "Model-free data-driven computing of inelastic material behavior"; Research Challenges in Mechanics: Novel Methods and Applications for Automated Computational Modeling, Hannover (Germany); March 2019;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended damage-plasticity model for large deformations with nonlinear isotropic and kinematic hardening"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • E. Toups, S. Reese, J.-W. Simon; "Material modelling of hyperelastic silicone adhesives considering stiffness reduction"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • E. Toups, S. Reese, J.-W. Simon; "Methoden zur Auslegung und Simulation von Metall-Glas-Klebungen im Bauwesen"; 19. Kolloquium Gemeinsame Forschung in der Klebtechnik, Köln (Deutschland); February 2019;
  • O. Barfusz, T. Brepols, J. Frischkorn, S. Reese; "Towards the incorporation of damage into solid-shells based on reduced integration"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • C. Gierden, J. Kochmann, K. Manjunatha, J. Waimann, S. Wulfinghoff, B. Svendsen, S. Reese; "A model order reduction method for finite strain FFT solvers using a compressed sensing technique"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • M. Fassin, R. Eggersmann, S. Wulfinghoff, S. Reese; "An anisotropic brittle damage model with a damage tensor of second order using a micromorphic approach"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • M. Reuvers, S. Rezaei, T. Brepols, S. Reese; "Development of a novel damage approach on the microstructure for modeling woven Ceramic Matrix Composites"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • D. Jaworek, J. Waimann, S. Wulfinghoff, S. Reese; "A Hashin-Shtrikman type semi-analytical homogenization procedure"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • K. Martin, S. Reese; "Thermo-mechanical fluid-structure interaction for thermal buckling"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • J. Waimann, K. Hackl, P. Junker; "A variational material model for shape memory alloys under thermal cycling"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • S. Rezaei, J. R. Mianroodi, T. Brepols, S. Wulfinghoff, S. Reese; "An interface model to account for damage and plasticity at grain boundaries"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • A. Alajami, Y. Li, R. Bedzra, J.-W. Simon; "Modeling the anisotropic in-plane and out-of-plane elastic-plastic response of paper"; International Conference on Plasticity, Damage, and Fracture 2019, Panama City (Panama); January 2019;
  • R. Eggersmann, T. Kirchdoerfer, S. Reese, L. Stainier, M. Ortiz; "A model-free data-driven approach for inelastic material bahavior"; XXVI Conference on Computer Methods in Materials Technology, Zakopane (Poland); January 2019;
  • J.-W. Simon, D. Höwer, S. Reese, J. Fish; "Progressive damage analysis of layered carbon fiber reinforced composites on different scales"; Sitzung des Arbeitskreises Mikrostrukturmechanik im Fachausschuss Computersimulation der DGM, Wuppertal (Germany); December 2018;
  • J.-W. Simon, D. Höwer, S. Reese, J. Fish; "Mehrskalige nichtlineare Modellierung von Carbonfaserverstärkten Verbundwerkstoffen"; Klassensitzung der Klasse für Ingenieur- und Wirtschaftswissenschaften der Nordrhein-Westfälischen Akademie der Wissenschaften und der Künste, Düsseldorf (Germany); November 2018;
  • S. Reese, J. Kochmann, C. Gierden, D. Jaworek, S. Kastian, S. Wulfinghoff, B. Svendsen; "Multi-scale modeling using finite elements, fast Fourier transforms and proper orthogonal decomposition"; International Symposium on Process Signatures, Bremen (Germany); November 2018;
[1-72] 73-144 145-216 217-288 289-360 361-432 433-504 505-576 577-648 649-716 [ALLE 1-716]

Abschlußinformationen