Hilfsnavigation

IFAM-Logo

Zielgruppennavigation

 

Inhalt

Präsentationen (716)

 

  • C. Gierden, J. Waimann, B. Svendsen, S. Reese; "FFT-based simulation using a reduced set of frequencies adapted to the underlying microstructure"; XXVII Conference on Computer Methods in Materials Technology (Virtual Conference); March 2021;
  • C. Gierden, J. Waimann, B. Svendsen, S. Reese; "A model order reduction technique for FFT-based microstructure simulation using a geometrically adapted reduced set of frequencies"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • T. van der Velden, B. Rommes, A. Klink, S. Reese, J. Waimann; "Efficient modeling of material dissolution in electrochemical machining"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • O. Barfusz, T. van der Velden, T. Brepols, S. Reese; "Reduced integration-based solid and solid-shell finite elements for gradient-extended damage"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • L. Lamm, H. Holthusen, C. Böhm, S. Jockenhövel, S. Reese; "Macroscopic modelling of stress driven anisotropic growth in bioengineered tissues"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • J. Waimann, C. Gierden, A. Schmidt, B. Svendsen, S. Reese; "FFT-based homogenization using a reduced set of frequencies and a clustered microstructure"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • J. Waimann, K. Hackl, S. Reese, P. Junker; "Irreversible effects during phase transformations (Poster)"; 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Virtual Conference); March 2021;
  • H. Holthusen, T. Brepols, S. Reese, J.-W. Simon; "Modeling the damage progression of fiber-reinforced composites using a gradient-extended damage model accounting for finite strains"; 14th WCCM & ECCOMAS Congress (Virtual Conference); January 2021;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended damage-plasticity model for finite deformations"; 14th WCCM & ECCOMAS Congress (Virtual Conference); January 2021;
  • H. R. Bayat, A. R. Harandi, S. Rezaei, T. Brepols, S. Reese; "Modeling of failure at the interface of ductile materials by applying the cohesive discontinuous Galerkin method"; 24th International Conference on Material Forming (ESAFORM) (Virtual Conference); April 2021;
  • E. Prume, G. Kloppenburg, S. Felder, J.-W. Simon; "A constitutive framework for paperboard accounting for anisotropy and compressible plasticity at finite strains"; Progress in Paper Physics Seminar, Jyväskylä (Finland); September 2020;
  • G. Kloppenburg, H. Holthusen, Y. Li, J.-F. Bloch, U. Hirn, J.-W. Simon; "Numerical investigation of paper using the concept of representative volume elements characterized by single fiber behavior and fiber-fiber interaction"; Progress in Paper Physics Seminar, Jyväskylä (Finland); September 2020;
  • David Jaworek, Christian Gierden, Tobias Kinner-Becker, Johanna Waimann, Stefanie Reese; "Modeling material modifications using a process independent approach"; 23rd International Conference on Material Forming (ESAFORM); May 2020;
  • H. Holthusen, T. Brepols, S. Reese, J.-W. Simon; "A gradient-extended damage model for transversal isotropic materials with plasticity: Micromorphic formulation and numerical implementation"; Ski-Seminar, Val-d'Illiez (Switzerland); February 2020;
  • M. Reuvers, T. Guo, S. Rezaei, T. Brepols, S. Reese; "A thermomechanical interface formulation describing separation in ceramic matrix composites"; Seminar im Rahmen des GRK 2078, Karlsruhe Institute of Technology (KIT); February 2020;
  • O. Barfusz, T. Brepols, S. Reese; "Reduced integration-based finite element technologies for gradient-extended damage"; Ski-Seminar, Val-d'Illiez (Switzerland); February 2020;
  • S. Felder, H. Holthusen, S. Hesseler, F. Pohlkemper, J.-W. Simon, T. Gries, S. Reese; "Modeling the crystallization kinetics and thermo-mechanical behavior of semi-crystalline polymers"; Ski-Seminar, Val-d'Illiez (Switzerland); February 2020;
  • S. Reese, S. Rezaei, T. Brepols, J. R. Mianroodi, M. Fassin; "Multiscale modeling of plasticity-coupled damage - from MD to anisotropic continuum mechanics"; International Conference on Plasticity, Damage, and Fracture 2020 (ICPDF), Rivera Maya (Mexico); January 2020;
  • S. Reese, R. Eggersmann, L. Stainier, M. Ortiz; "DD mechanics - the end of classical constitutive modeling?"; Superalloy Data Science - Acquisition, Storage, Mining and Machine Learning, Bochum (Germany); January 2020;
  • L. Lamm, S. Jockenhövel, S. Reese; "On the computational modeling of bioengineered soft collagenous tissues for the use in biohybrid aortic valve implants"; IV. International Conference on Biomedical Technology 2019, Hannover (Germany); November 2019;
  • S. Reese, R. Eggersmann, S. Kastian, T. Kirchdoerfer, L. Stainier, M. Ortiz; "DD mechanics, MOR, and HTA - suitable methods to cross the scales?"; keynote lecture, Computational modeling of Complex Materials across the Scales (CMCS 2019), Glasgow (UK); October 2019;
  • J. Waimann, K. Hackl, P. Junker; "Irreversible effects in cycled shape memory alloys - a variational material model and finite-element investigations"; ECCOMAS 5th Young Investigators Conference, Kraków (Poland); September 2019;
  • S. Reese, S. Rezaei, M. Fassin, L. Poggenpohl, J. R. Mianroodi, T. Brepols, S. Wulfinghoff; "Atomistically motivated interface modeling to account for coupled plasticity and damage"; XV International Conference on Computational Plasticity (COMPLAS 2019), Barcelona (Spain); September 2019;
  • S. Felder, H. Holthusen, S. Hesseler, F. Pohlkemper, J.-W. Simon, T. Gries, S. Reese; "A finite strain, thermo-mechanically coupled material model for semi-crystalline polymers, incorporating crystallisation kinetics."; XV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelona (Spain); September 2019;
  • S. Kastian, S. Reese; "An adaptive approach of proper orthogonal decomposition to capture non-linearities with a small number of modes"; 15th International Conference on Computational Plasticity (COMPLAS 2019), Barcelona (Spain); September 2019;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended damage-plasticity model for large deformations: theory and numerical aspects"; 15th International Conference on Computational Plasticity (COMPLAS 2019), Barcelona (Spain); September 2019;
  • O. Barfusz, T. Brepols, S. Reese; "Gradient-extended damage modeling with reduced integration-based continuum elements"; 15th International Conference on Computational Plasticity (COMPLAS 2019), Barcelona (Spain); September 2019;
  • D. Höwer, B. A. Lerch, B. A. Bednarcyk, E. J. Pineda, S. Reese, J.-W. Simon; "Modeling of honeycomb core sandwich panels undergoing interfacial crack propagation"; 7th ECCOMAS Thematic Conference on The Mechanical Response of Composites, Girona (Spain); September 2019;
  • C. Gierden, J. Kochmann, J. Waimann, B. Svendsen, S. Reese; "Microstructural convergence analysis as basis for an efficient and accurate two-scale FE-FFT-based simulation approach"; 8th GACM Colloquium on Computational Mechanics, Kassel (Germany); August 2019;
  • J. Waimann, K. Hackl, P. Junker; "Variational modeling of irreversible effects in cycled polycrystalline shape memory alloys"; 8th GACM Colloquium on Computational Mechanics, Kassel (Germany); August 2019;
  • S. Reese, O. Barfusz, T. Brepols; "Reduced integration-based continuum elements for gradient-extended damage and fracture"; Modern Finite Element Technologies 2019 (MFET), Bad Honnef (Germany); July 2019;
  • H. R. Bayat, P. Schreyer, S. Rezaei, S. Reese; "Locking-free interface failure modeling applying cohesive discontinuous Galerkin method for matching and non-matching meshes"; ECCOMAS Thematic Conference on Modern Finite Element Technologies (MFET), Bad Honnef (Germany); July 2019;
  • D. Höwer, B. A. Lerch, B. A. Bednarcyk, E. J. Pineda, S. Reese, J.-W. Simon; "Modeling of delamination with bridging fibers in sandwich panels made of aluminum honeycomb core and CFRP facesheets"; 5th International Conference on Mechanics of Composites, Lisboa (Portugal); July 2019;
  • C. Gierden, J. Kochmann, J. Waimann, B. Svendsen, S. Reese; "Efficient and accurate two-scale FE-FFT-based prediction of polycrystalline material behavior at finite strains"; ECCOMAS Thematic Conference on Computational Methods in Multi-scale, Multi-uncertainty and Multi-physics Problems (CM4P), Porto (Portugal); July 2019;
  • S. Kastian, S. Reese; "An efficient possibility of uncertainty quantification with the adaptive proper orthogonal decomposition (APOD)"; UNCECOMP 2019, Crete (Greece); June 2019;
  • J. Waimann, K. Hackl, S. Reese, P. Junker; "Variational material modeling of the transformation induced plasticity in polycrystalline steel"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • M. Reuvers, S. Rezaei, T. Brepols, S. Reese; "Development of a thermomechanically coupled damage approach for modeling woven ceramic matrix composites"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • S. Rezaei, J. R. Mianroodi, S. Reese; "A method for modeling intergranular fracture and grain boundary sliding"; 6th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019), Braunschweig (Germany); June 2019;
  • S. Felder, N. A. Vu, S. Reese, J.-W. Simon; "Material modelling and experimental investigation of semi-crystalline polymers at finite strains for varying degrees of crystallinity"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • E. Toups, R. Seewald, B. Schaaf, U. Reisgen, M. Feldmann, J.-W. Simon, S. Reese; "Modelling of hyperelastic material accounting for the Mullins effect"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended damage-plasticity model for large deformations with combined nonlinear hardening"; 6th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019), Braunschweig (Germany); June 2019;
  • A. Alajami, Y. Li, J.-W. Simon; "Modellierung des anisotrop elastisch-plastischen Materialverhaltens von Papier"; AK Stoffgesetze, Berlin (Germany); June 2019;
  • D. Jaworek, J. Waimann, S. Wulfinghoff, S. Reese; "A Hashin-Shtrikman type semi-analytical homogenization procedure in multiscale modeling to account for coupled problems"; 6th International Conference on Material Modelling, Lund (Sweden); June 2019;
  • K. Martin, S. Reese; "Thermo-mechanically coupled fluid structure interaction for thermal buckling"; Coupled Problems 2019, Sitges (Spain); June 2019;
  • S. Reese, S. Rezaei, M. Fassin, L. Poggenpohl, J. R. Mianroodi, T. Brepols, S. Wulfinghoff; "Atomistically motivated interface modeling to account for coupled plasticity and damage"; plenary lecture, 6th edition of International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019), Braunschweig (Germany); June 2019;
  • S. Reese, R. Eggersmann, T. Kirchdoerfer, L. Stainier, M. Ortiz; "Data-driven mechanics – an alternative to constitutive modeling?"; 6th International Conference on Material Modelling (ICMM6), Lund (Sweden); June 2019;
  • S. Reese, S. Rezaei, M. Fassin, J. R. Mianroodi, T. Brepols, S. Wulfinghoff; "Damage modeling at various scales – from atomistic findings to anisotropic continuum mechanics"; Khalifa University, Abu Dhabi (UAE); May 2019;
  • R. Eggersmann, T. Kirchdoerfer, L. Stainier, M. Ortiz, S. Reese; "A general approach for model-free data-driven inelasticity"; 5th GAMM AG Data Workshop - New Challanges in Data-Driven Modelling, Aachen (Germany); May 2019;
  • A. Alajami, Y. Li, G. Kloppenburg, J.-W. Simon; "Evaluating the mechanical response of fiber networks with RVEs"; International Paper Physics Conference in conjunction with PaperCon 2019, Indianapolis (USA); May 2019;
  • K. Khaledi, L. Poggenpohl, T. Brepols, S. Reese; "Application of a locking-free element in modeling of joining by clinching"; 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz (Spain); May 2019;
  • S. Kastian, S. Reese; "Usage of data to create efficient surrogate models and low-rank approximations"; GAMM AG Data 2019, Aachen (Germany); May 2019;
  • S. Reese, S. Rezaei, M. Fassin, J. R. Mianroodi, T. Brepols, S. Wulfinghoff; "Damage modeling at various scales - from atomistic findings to anisotropic continuum mechanics"; Colloquium at University of Technology of Troyes, Troyes (France); April 2019;
  • S. Reese, H. Bayat, O. Barfusz, S. Wulfinghoff; "On the equivalence between dG and reduced integration with hourglass stabilization"; Euromech Colloquium 600: New challenges in finite element technology, Aachen (Germany); March 2019;
  • M. Fassin, E. Prume, R. Eggersmann, S. Wulfinghoff, S. Reese; "Efficient and reliable development of anisotropic damage models by means of AceGen"; Research Challenges in Mechanics (RCM): Novel Methods and Applications for Automated Computational Modeling, Hannover (Germany); March 2019;
  • H. R. Bayat, P. Schreyer, S. Rezaei, S. Reese; "Crack propagation modeling applying cohesivediscontinuous Galerkin method - Does locking matter?"; EuroMech Colloquium 600, 2019, Aachen (Germany); March 2019;
  • R. Eggersmann, S. Reese, L. Stainier, M. Ortiz; "Model-free data-driven computing of inelastic material behavior"; Research Challenges in Mechanics: Novel Methods and Applications for Automated Computational Modeling, Hannover (Germany); March 2019;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended damage-plasticity model for large deformations with nonlinear isotropic and kinematic hardening"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • E. Toups, S. Reese, J.-W. Simon; "Material modelling of hyperelastic silicone adhesives considering stiffness reduction"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • E. Toups, S. Reese, J.-W. Simon; "Methoden zur Auslegung und Simulation von Metall-Glas-Klebungen im Bauwesen"; 19. Kolloquium Gemeinsame Forschung in der Klebtechnik, Köln (Deutschland); February 2019;
  • O. Barfusz, T. Brepols, J. Frischkorn, S. Reese; "Towards the incorporation of damage into solid-shells based on reduced integration"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • C. Gierden, J. Kochmann, K. Manjunatha, J. Waimann, S. Wulfinghoff, B. Svendsen, S. Reese; "A model order reduction method for finite strain FFT solvers using a compressed sensing technique"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • M. Fassin, R. Eggersmann, S. Wulfinghoff, S. Reese; "An anisotropic brittle damage model with a damage tensor of second order using a micromorphic approach"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • M. Reuvers, S. Rezaei, T. Brepols, S. Reese; "Development of a novel damage approach on the microstructure for modeling woven Ceramic Matrix Composites"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • D. Jaworek, J. Waimann, S. Wulfinghoff, S. Reese; "A Hashin-Shtrikman type semi-analytical homogenization procedure"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • K. Martin, S. Reese; "Thermo-mechanical fluid-structure interaction for thermal buckling"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • J. Waimann, K. Hackl, P. Junker; "A variational material model for shape memory alloys under thermal cycling"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • S. Rezaei, J. R. Mianroodi, T. Brepols, S. Wulfinghoff, S. Reese; "An interface model to account for damage and plasticity at grain boundaries"; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna (Austria); February 2019;
  • A. Alajami, Y. Li, R. Bedzra, J.-W. Simon; "Modeling the anisotropic in-plane and out-of-plane elastic-plastic response of paper"; International Conference on Plasticity, Damage, and Fracture 2019, Panama City (Panama); January 2019;
  • R. Eggersmann, T. Kirchdoerfer, S. Reese, L. Stainier, M. Ortiz; "A model-free data-driven approach for inelastic material bahavior"; XXVI Conference on Computer Methods in Materials Technology, Zakopane (Poland); January 2019;
  • J.-W. Simon, D. Höwer, S. Reese, J. Fish; "Progressive damage analysis of layered carbon fiber reinforced composites on different scales"; Sitzung des Arbeitskreises Mikrostrukturmechanik im Fachausschuss Computersimulation der DGM, Wuppertal (Germany); December 2018;
  • J.-W. Simon, D. Höwer, S. Reese, J. Fish; "Mehrskalige nichtlineare Modellierung von Carbonfaserverstärkten Verbundwerkstoffen"; Klassensitzung der Klasse für Ingenieur- und Wirtschaftswissenschaften der Nordrhein-Westfälischen Akademie der Wissenschaften und der Künste, Düsseldorf (Germany); November 2018;
  • S. Reese, J. Kochmann, C. Gierden, D. Jaworek, S. Kastian, S. Wulfinghoff, B. Svendsen; "Multi-scale modeling using finite elements, fast Fourier transforms and proper orthogonal decomposition"; International Symposium on Process Signatures, Bremen (Germany); November 2018;
  • J. Kochmann, K. Manjunatha, S. Wulfinghoff, B. Svendsen, S. Reese; "A novel model order reduction method for FFT-based solvers using a sparse sampling technique"; 9th International Congress of the Croatian Society of Mechanics, Split (Croatia); September 2018;
  • Y. Li, Z. Yu, J.-W. Simon; "Using representative volume elements for evaluating the out-of-plane response of fiber networks"; Progress in Paper Physics Seminar (PPPS), Lodz (Poland); September 2018;
  • A. Alajami, Y. Li, A.N. Giashi, J.-W. Simon; "Continuum modelling of the in-plane and out-of-plane behaviour of paper based on finite strain elasto-plasticity"; Progress in Paper Physics Seminar (PPPS), Lodz (Poland); September 2018;
  • S. Reese, J. Kochmann, S. Kastian, R. Eggersmann, S. Wulfinghoff; "Multi-scale modeling using finite elements, fast Fourier transforms and proper orthogonal decomposition in engineering"; plenary lecture, 9th International Congress of the Croatian Society of Mechanics, 2018, Split (Croatia); September 2018;
  • S. Reese, J. Kochmann, S. Kastian; "Model order reduction in the context of FFT-based homogenization methods and uncertainty quantification"; keynote lecture, Reduced Order Modeling in Mechanics of Materials, 2018, Bad Herrenalb (Germany); August 2018;
  • A. Alipour, S. Wulfinghoff, S. Reese; "A grain boundary model for gradient-extended geometrically nonlinear crystal plasticity"; 10th European Solid Mechanics Conference (ESMC), Bologna (Italy); July 2018;
  • Y. Li, Z. Yu, J.-W. Simon; "Numerical Evaluation of the out-of-plane response of fiber networks using a representative volume element"; 10th World Congress in Computational Mechanics (WCCM), New York City (USA); July 2018;
  • K. Martin, S. Reese; "A fully thermodynamically coupled model for thermo-viscoplasticity with application to thermal buckling"; 10th European Solid Mechanics Conference (ESMC), Bologna (Italy); July 2018;
  • S. Reese, J. Kochmann, F. Cavaliere, R. Eggersmann, S. Wulfinghoff; "Multi-scale modeling using finite elements, fast Fourier transforms and proper orthogonal decomposition"; keynote lecture, 10th European Solid Mechanics Conference (ESMC), 2018, Bologna (Italy); July 2018;
  • S. Reese, S. Kastian, D. Moser, L. Grasedyck; "Proper orthogonal decomposition (POD) combined with hierarchical tensor approximation (HTA) in the context of uncertain parameters"; 10th World Congress in Computational Mechanics (WCCM), 2018, New York (USA); July 2018;
  • S. Rezaei, J. R. Mianroodi, S. Wulfinghoff, S. Reese; "A generalized interface model to account for anisotropic plasticity and damage at grain boundaries"; 10th European Solid Mechanics Conference (ESMC), Bologna (Italy); July 2018;
  • M. Fassin, R. Eggersmann, S. Wulfinghoff, S. Reese; "A gradient-extended anisotropic damage model with crack-closure utilizing a micromorphic approach"; 10th European Solid Mechanics Conference (ESMC), Bologna (Italy); July 2018;
  • K. Khaledi, S. Wulfinghoff, S. Reese; "A microscale finite element model for cold pressure welding in layered metal composites"; 4th International Conference on Mechanics of Composites (MECHCOMP 2018), Madrid (Spain); July 2018;
  • D. Höwer, K.C. Jois, B.A. Bednarcyk, E.J. Pineda, S. Reese, J.-W. Simon; "Mixed-mode debonding of sandwich panels and monolithic laminates exhibiting fiber bridging"; 10th European Solid Mechanics Conference (ESMC), Bologna (Italy); July 2018;
  • H. R. Bayat, S. Wulfinghoff, S. Reese; "A locking-free symmetric hybrid discontinuous Galerkin method for large deformations"; 10th European Solid Mechanics Conference (ESMC), Bologna (Italy); July 2018;
  • K. Khaledi, S. Wulfinghoff, S. Reese; "Finite Element Modeling of Bond Formation in Cold Roll Bonding Processes"; International Conference on Tribology in Manufacturing Processes (ICTMP), Elsinore (Denmark); June 2018;
  • D. Höwer, K.C. Jois, B.A. Bednarcyk, E.J. Pineda, S. Reese, J.-W. Simon; "A novel mixed-mode cohsive zone model for delamination with severe fiber bridging applied to sandwich panels and monolithic laminates"; 18th European conference on composite materials (ECCM), Athens (Greece); June 2018;
  • M. Fassin, R. Eggersmann, S. Wulfinghoff, S. Reese; "A gradient-extended anisotropic damage and fracture model based on a second order damage tensor"; 6th European Conference on Computational Mechanics (ECCM), Glasgow (UK); June 2018;
  • J.-W. Simon, D. Höwer, S. Reese, J. Fish; "Progressive Damage Analysis of Layered Carbon Fiber Reinforced Composites"; 6th European Conference on Computational Mechanics (ECCM), Glasgow (UK); June 2018;
  • J. Kochmann, T. Brepols, S. Wulfinghoff, B. Svendsen, S. Reese; "Numerically robust and efficient two-scale FE-FFT-based finite strain crystal plasticity simulations of polycrystalline materials"; 6th European Conference on Computational Mechanics (ECCM), Glasgow (UK); June 2018;
  • O. Barfusz, S. Reese; "Solid-shells based on reduced integration - geometrically non-linear analysis of layered structures"; 6th European Conference on Computational Mechanics (ECCM), Glasgow (UK); June 2018;
  • T. Brepols, S. Wulfinghoff, S. Reese; "Ein gradientenerweitertes Schädigungs-Plastizitätsmodell für große Deformationen"; Arbeitskreis Stoffgesetze, Aachen (Germany); June 2018;
  • S. Felder, J.-W. Simon, S. Reese; "A finite strain elasto-plastic material model for semicrystalline polymers incorporating kinematic and isotropic hardening"; ECCM 18th European Conference on Composite Materials, Athens (Greece); June 2018;
  • L. Poggenpohl, S. Wulfinghoff, S. Reese; "A gradient extended damage and fracture model for long fiber reinforced plastics"; 6th European Conference on Computational Mechanics (ECCM), Glasgow (UK); June 2018;
  • L. Poggenpohl; "Gravity: Holding things together since 13.4 Billion BC"; Science Slam on 6th European Conference on Computational Mechanics (ECCM), Glasgow (UK); June 2018;
  • K. Martin, S. Reese; "On the modelling of finite thermo-viscoplasticity with application to thermal buckling"; 6th European Conference on Computational Mechanics (ECCM), Glasgow (UK); June 2018;
  • R. Eggersmann, S. Reese; "Data-Driven Computational Mechanics - Eine erfolgsversprechende Alternative zur Materialmodellierung?"; Arbeitskreis Stoffgesetze, Aachen (Germany); June 2018;
  • S. Reese, S. Kastian, D. Moser, L. Grasedyck; "Proper orthogonal decomposition (POD) combined with hierarchical tensor approximation (HTA) in the context of uncertain parameters"; keynote lecture, 6th European Conference on Computational Mechanics (ECCM), 2018, Glasgow (UK); June 2018;
  • S. Kastian, S. Reese, D. Moser, L. Grasedyck; "Proper orthogonal decomposition (POD) combined with hierarchical tensor approximation (HTA) in the context of uncertain parameters"; IUTAM Symposium on Model Order Reduction of Coupled Systems (MORCOS 2018), Stuttgart (Germany); May 2018;
  • H. R. Bayat, S. Sarkar, F. Italiano, A. Bach, S. Wulfinghoff, S. Reese; "Generation of forming limit bands for ultra-high-strength steels in car body structures"; 21st annual ESAFORM Conference on Material Forming, Palermo (Italy); April 2018;
  • D. Höwer, S. Yu, B. Bednarcyk, E.J. Pineda, T.M. Ricks, J.-W. Simon, S. Reese; "Interface Properties and Multiscale Modeling of Composites"; Sino-German Workshop on Design Foundation of Oxidation Resistant Ultra-high Temperature Ceramic Matrix Composites Aiming to Structural Applications, Xi'an (China); April 2018;
  • K. Khaledi, S. Wulfinghoff, S. Reese; "Analysis of Factors Influencing the Bond Strength in Roll Bonding Processes"; 21st annual ESAFORM Conference on Material Forming, Palermo (Italia); April 2018;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A flexible 'two-surface' gradient-extended damage-plasticity model"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • J. Kochmann, T. Brepols, S. Wulfinghoff, B. Svendsen, S. Reese; "Numerically robust two-scale full-field finite strain crystal plasticity simulations of polycrystalline materials"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • F. Cavaliere, S. Wulfinghoff, S. Reese; "An efficient reduced computational method for nonlinear homogenization problems: the Hashin-Shtrikman type Finite Element method (HSFE)"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • O. Barfusz, R. Smeenk, S. Reese; "Solid-shell formulations based on reduced integration - investigations of anisotropic material behaviour at large deformations"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • M. Fassin, R. Eggersmann, S. Wulfinghoff, S. Reese; "A numerically robust gradient-extended anisotropic damage model"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • T. T. Nguyen, S. Wulfinghoff, S. Reese; "Micromechanical Modeling of a Generator Stator Electrical Insulation System"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • Y. Li, A. Alajami, J.-W. Simon; "Modeling the anisotropic in-plane and out-of-plane elastic-plastic response of paper"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • E. Toups, J.-W. Simon, S. Reese; "Constitutive modelling of hyperelastic rubber-like materials considering damage"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • S. Felder, J.-W. Simon, S. Reese; "A finite strain elasto-plastic material model incorporating kinematic and isotropic hardening for thermoplastic polymers"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • A. Alipour, S. Wulfinghoff, S. Reese; "Control-point based hybrid discontinuous Galerkin method for geometrically nonlinear crystal plasticity"; European Mechanics of Materials Conference (EMMC16), 2018, Nantes (France); March 2018;
  • L. Poggenpohl, S. Wulfinghoff, S. Reese; "A new material approach towards shear cutting of Carbon Fiber Reinforced Plastics"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich (Germany); March 2018;
  • S. Reese; "Forecasting of final ranking in sports‘ leagues– at the example of tennis –"; 8th Polish-Italian-German Winter Colloquium, 2018, La Clusaz (France); March 2018;
  • S. Reese, H. Bayat, S. Wulfinghoff; "Similarities between discontinuous Galerkin and reduced integration methods"; 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 2018, Munich (Germany); March 2018;
  • S. Reese, T. Brepols, M. Fassin, S. Wulfinghoff; "A flexible ’two-surface’ gradient-extended damage model for quasi-brittle and ductile materials"; European Mechanics of Materials Conference (EMMC16), 2018, Nantes (France); March 2018;
  • E. Toups, J.-W. Simon, S. Reese; "Constitutive modelling of hyperelastic rubber-like materials considering damage"; 16th European Mechanics of Materials Conference (EMMC16), Nantes (France); March 2018;
  • S. Rezaei, J. R. Mianroodi, D. Jaworek, S. Wulfinghoff, S. Reese; "Developing an interface model to investigate the damage and fracture in hard nano-coating layer"; European Mechanics of Materials Conference (EMMC16), 2018, Nantes (France); March 2018;
  • S. Reese, T. Brepols, B. Svendsen, S. Wulfinghoff; "Continuum mechanical framework for anisotropic inelastic material behaviour"; Workshop on „Variational Methods for Inelastic Solids“, Mathematical Institute Oberwolfach, Oberwolfach (Germany); February 2018;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A micromorphic two-surface damage-plasticity model: theory and numerical aspects"; International Conference on Plasticity, Damage, and Fracture 2018, San Juan (Puerto Rico, USA); January 2018;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Two-scale FE-FFT-based prediction of the local and effective mechanical behavior of polycrystalline materials at finite strains"; International Conference on Plasticity, Damage, and Fracture 2018, San Juan (Puerto Rico, USA); January 2018;
  • S. Reese, T. Brepols, S. Wulfinghoff; "Cyclic damage coupled with elasto-plasticity – anisotropic model and stability issues with respect to finite element technology"; International Conference on Plasticity, Damage, and Fracture 2018, San Juan (Puerto Rico, USA); January 2018;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Two-scale FE-FFT-based finite strain crystal plasticity simulations of polycrystalline materials"; Thematic Workshop: Computational challenges for mechanical simulations based on digital image data (GAMM AG Data Workshop), Karlsruhe (Germany); December 2017;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Numerically robust two-scale simulations of heterogeneous microstructures"; ECCOMAS Thematic Conference on Computational modeling of Complex Materials across the Scales (CMCS 2017), Paris (France); November 2017;
  • F. Cavaliere, S. Wulfinghoff, S. Reese; "Model-Order Reduction of Nonlinear Homogenization Problems using Hashin-Shtrikman Type Finite Element Scheme"; ECCOMAS Thematic Conference on Computational modeling of Complex Materials across the Scales (CMCS 2017), Paris (France); November 2017;
  • S. Reese, S. Kastian, L. Zhou; "Proper Orthogonal Decomposition – APOD / MORS and a quite different topic: forecasting"; keynote lecture, 4th International Workshop on Reduced Basis, POD and PGD Model Reduction Techniques, Sevilla (Spain); November 2017;
  • A. Alipour, S. Wulfinghoff, B. Svendsen, S. Reese; "Geometrically nonlinear single crystal viscoplasticity implemented into a hybrid discontinuous Galerkin framework"; 7th GACM Colloquium on Computational Mechanics, Stuttgart (Germany); October 2017;
  • S. Felder, J. Kochmann, S. Wulfinghoff, S. Reese; "Multiscale FE-FFT-based thermo-mechanically coupled modeling of viscoplastic polycrystalline materials"; 7th GACM Colloquium on Computational Mechanics, Stuttgart (Germany); October 2017;
  • J. Neumann, J.-W. Simon, S. Reese; "Validation of a synthetic model of hot mix asphalt"; 7th GACM Colloquium on Computational Mechanics, Stuttgart (Germany); October 2017;
  • S. Reese, O. Barfusz, R. Smeenk, M. Schwarze, J. Frischkorn, J.-W. Simon; "Solid-shell formulations based on reduced integration - investigations of anisotropic material behaviour, large deformation problems and stability"; plenary lecture, 11th International Conference "Shell Structures: Theory and Applications" (11th SSTA), Gdańsk (Poland); October 2017;
  • J.-W. Simon, D. Höwer, S. Reese, J. Fish; "A continuum damage model for delamination and intralaminar damage in composite laminates"; 7th GACM Colloquium on Computational Mechanics, Stuttgart (Germany); October 2017;
  • M. Fassin, R. Eggersmann, S. Wulfinghoff, S. Reese; "A gradient-extended elastic isotropic damage model considering crack-closure"; 7th GACM Colloquium on Computational Mechanics, Stuttgart (Germany); October 2017;
  • S. Reese, J. Kochmann, S. Rezaei, S. Wulfinghoff, L. Zhou, F. Cavaliere, J.-W. Simon, B. Svendsen, A. Radermacher; "Multi-scale modeling using finite elements, fast Fourier transforms and proper orthogonal decomposition in production and medical technology"; plenary lecture, Computational Modelling of Multi-Uncertainty and Multi-Scale Problems (COMUS), Porto (Portugal); September 2017;
  • F. Cavaliere, S. Wulfinghoff, S. Reese; "A variationally-based model order reduction technique for nonlinear microstructures and efficient two-scale simulations of complex engineering structures"; 4th ECCOMAS Young Investigators Conference and PhD Olympiad 2017 (YIC 2017), Milan (Italy); September 2017;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Two-scale FE-FFT-based computational modeling of the local and effective material behavior of elasto-viscoplastic polycrystals at finite strains"; 14th International Conference on Computational Plasticity (COMPLAS 2017), Barcelona (Spain); September 2017;
  • D. Höwer, B. Bednarcyk, E. Pineda, B. Lerch, S. Reese, J.-W. Simon; "Accounting for fiber bridging in cohesive zone modeling of facesheet to core delamination"; 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Eindhoven (The Netherlands); September 2017;
  • S. Reese, L. Zhou, S. Kastian, J. Simon, A. Radermacher; "Proper orthogonal decomposition at finite strains – APOD / MORS / FE*POD"; 14th International Conference on Computational Plasticity (COMPLAS 2017), Barcelona (Spain); September 2017;
  • D. Höwer, B.A. Lerch, B.A. Bednarcyk, E.J. Pineda, S. Reese, J.-W. Simon; "Numerical and experimental investigation of mode I facesheet to core delamination of sandwich panels exhibiting fiber bridging"; 20th International Conference on Composite Structures (ICCS20), Paris (France); September 2017;
  • J. Neumann, J.-W. Simon, S. Reese; "Mechanical and morphological validation of a synthetic model of asphalt concrete"; 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Eindhoven (The Netherlands); September 2017;
  • M. Fassin, S. Rezaei, R. Eggersmann, O. Zarei, S. Wulfinghoff, S. Reese; "Mesh-objective description of isotropic/anisotropic damage with crack-closure and irreversible strains"; 14th International Conference on Computational Plasticity (COMPLAS 2017), Barcelona (Spain); September 2017;
  • K. Martin, S. Reese; "Simulation technologies for thermal buckling in aerothermodynamically loaded thin-walled structures"; 4th ECCOMAS Young Investigators Conference and PhD Olympiad 2017 (YIC 2017), Milan (Italy); September 2017;
  • K. Martin, D. Daub, B. Esser, A. Gülhan, F. Hötte, M. Haupt, S. Reese; "Simulationsmethoden und experimentelle Validierung für thermisches Beulen dünnwandiger Strukturen unter aerothermodynamischen Lasten"; Deutscher Luft- und Raumfahrtkongress 2017 (DLRK), Munich (Germany); September 2017;
  • H. R. Bayat, S. Kastian, S. Wulfinghoff, S. Reese; "On the comparison of 2D-3D non-conforming / discontinuous Galerkin methods with insight into locking problems"; ECCOMAS Thematic Conference on Modern Finite Element Technologies (MFET); August 2017;
  • O. Barfusz, S. Reese; "Evaluation of layered structures using an efficient reduced integration-based solid-shell concept"; ECCOMAS Thematic Conference on Modern Finite Element Technologies (MFET), Bad Honnef (Germany); August 2017;
  • S. Reese, H. Bayat, S. Wulfinghoff; "On the equivalence between discontinuous Galerkin and reduced integration with hourglass stabilization"; ECCOMAS Thematic Conference on Modern Finite Element Technologies (MFET), Bad Honnef (Germany); August 2017;
  • S. Reese, J. Kochmann, S. Rezaei, S. Wulfinghoff, B. Svendsen; "A multi-scale FE-FFT-based computational approach to predict the material response of polycrystalline materials"; keynote lecture, Workshop on Multiscale Computational Analysis of Complex Materials (MCACM), Copenhagen (Denmark); August 2017;
  • L. Poggenpohl, Y. Kiliclar, T. Brepols, S. Wulfinghoff, S. Reese; "Plasticity and damage with gradient enhancement: A review of application to high speed forming"; 36th International Deep-Drawing Research Group Conference (IDDRG 2017), Munich (Germany); July 2017;
  • S. Wulfinghoff, H. Bayat, A. Alipour, S. Reese; "Ein hybrides diskontinuierliches Galerkin-Element und Verbindung zur klassischen Hourglass-Stabilisierung"; SPP1748-Workshop: Mechanische und mathematische Analyse von nichtkonventionellen Diskretisierungsverfahren, Aachen (Germany); July 2017;
  • J.-W. Simon, D. Höwer, B. Stier, B. Bednarcyk, S. Reese, J. Fish; "Modeling intralaminar damage progression and delamination in layered composites"; 3rd International Conference on Mechanics of Composites, Bologna (Italy); July 2017;
  • S. Reese, T. Brepols, S. Wulfinghoff; "Damage coupled with elastoplasticity – robustness and stability issues of a special finite element technology"; 5th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2017), Nantes (France); June 2017;
  • S. Wulfinghoff, M. Fassin, S. Reese; "Conditions for phenomenological anisotropic damage models derived from micromechanics"; AK-Stoffgesetze, Siegen (Germany); June 2017;
  • D. Höwer, B.A. Lerch, B.A. Bednarcyk, E.J. Pineda, S. Reese, J.-W. Simon; "Modeling of facesheet to core delamination of sandwich panels exhibiting severe fiber bridging by means of cohesive zone models"; 5th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2017), Nantes (France); June 2017;
  • Y. Li, S. Reese, J.-W. Simon; "Microstructure modeling of paper"; Euromech Colloquium 592 Deformation and Damage Mechanisms of Wood-fibre Network- Materials and Structures, Stockholm (Sweden); June 2017;
  • J.-W. Simon, Y. Li, S. Reese; "Anisotropic elastic-plastic deformation of paper: In-plane and out-of-plane model"; Euromech Colloquium 592 Deformation and Damage Mechanisms of Wood-fibre Network- Materials and Structures, Stockholm (Sweden); June 2017;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A micromorphic damage-plasticity model and its application in mesh objective finite element simulations"; 5th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2017), Nantes (France); June 2017;
  • M. Fassin, R. Eggersmann, S. Wulfinghoff, S. Reese; "Towards a mesh-objective description of anisotropic damage with crack-closure by means of a micromorphic formulation"; 5th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2017), Nantes (France); June 2017;
  • S. Wulfinghoff, S. Reese; "A generalized cohesive zone model and a grain boundary yield criterion for gradient plasticity without application of virtual power arguments"; International Conference on Material Modeling (ICMM5), Rome (Italy); June 2017;
  • L. Poggenpohl, S. Wulfinghoff, S. Reese; "A new approach in material modeling towards shear cutting of CFRP"; International Conference on Material Modeling (ICMM5), Rome (Italy); June 2017;
  • S. Reese; "Digitalisierung und Modellreduktion – Anwendungen in Medizintechnik und Bauingenieurwesen"; Sommerschule des SPP 1542 Leicht Bauen mit Beton, Meisdorf (Germany); May 2017;
  • S. Reese; "Modellierung und Datenerzeugung – Anwendungen in der Produktions- und Medizintechnik"; Journalistenkolleg „Daten – Rohstoff für die Zukunft?“, gefördert von Leopoldina / Robert Bosch Stiftung, Jülich (Germany); April 2017;
  • J. Neumann, J.-W. Simon, S. Reese; "Validation of a synthetic 3D mesoscale model of hot mix asphalt"; Clausthal-Göttingen International Workshop on Simulation Science, Göttingen (Germany); April 2017;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Two-scale, FE-FFT- and phase-field-based modeling of micromechanical fields and the overall material behavior of polycrystalline materials"; 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar (Germany); March 2017;
  • O. Barfusz, M. Schwarze, S. Reese; "Numerical investigations of CMC nozzle structures: constitutive modelling and finite element technology"; 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar (Germany); March 2017;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended damage-plasticity model to counteract mesh dependence in finite element simulations"; 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar (Germany); March 2017;
  • J.-W. Simon, D. Höwer, B. Stier, B. Bednarcyk, S. Reese, J. Fish; "A continuum model for intralaminar damage progression and delamination in layered composites"; 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar (Germany); March 2017;
  • L. Zhou, J.-W. Simon, S. Reese; "Model order reduction on the substructure level applied in nonlinear static and dynamic analysis"; 2nd Exploratory Workshop on Applications of Model Order Reduction Methods in Industrial Research and Development, Luxembourg (Luxemburg); March 2017;
  • H. R. Bayat, S. Kastian, S. Wulfinghoff, S. Reese; "Discontinuous Galerkin (dG) method in 3D linear elasticity with application in problems with locking"; 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar (Germany); March 2017;
  • S. Wulfinghoff, H. Bayat, A. Alipour, S. Reese; "Investigation of a locking-free hybrid discontinuous Galerkin element that is very easy to implement into FE-codes"; 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar (Germany); March 2017;
  • S. Rezaei, S. Wulfinghoff, S. Reese; "Application and parameter identification of cohesive zone elements for intergranular fracture in thin layer"; 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar (Germany); March 2017;
  • L. Poggenpohl, S. Wulfinghoff, S. Reese; "A new approach in material modeling towards shear cutting of CFRP"; 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar (Germany); March 2017;
  • A. Alipour, S. Wulfinghoff, B. Svendsen, S. Reese; "A new regularization technique for geometrically nonlinear crystal plasticity implemented into a new discontinuous Galerkin element formulation"; 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar (Germany); March 2017;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "A multiscale FE-FFT- and phase-field-based model for the prediction of micromechanical fields and the overall material behavior of viscoplastic polycrystals"; 4th GAMM workshop on phase field modeling, Aachen (Germany); February 2017;
  • S. Reese, J. Kochmann, Y. Kiliclar, S. Rezaei, A. Radermacher, S. Wulfinghoff, B. Svendsen; "Multiscale Modeling – Advantages and Challenges in the Context of Manufacturing Processes"; plenary lecture, 24th Conference on Computer Methods in Materials Technology (KomPlasTech 2017), Zakopane (Poland); January 2017;
  • S. Wulfinghoff, M. Fassin, S. Reese; "Conditions for phenomenological anisotropic damage models derived from micro-mechanics"; 16th GAMM-Seminar on Microstructures, Dortmund (Germany); January 2017;
  • L. Zhou, J.-W. Simon, S. Reese; "A novel POD-based model order reduction at the substructure level for nonlinear structural analysis"; 3rd Workshop on Model Reduction of Complex Dynamical Systems (MODRED 2017), Odense (Denmark); January 2017;
  • S. Wulfinghoff, M. Fassin, S. Reese; "Conditions for phenomenological anisotropic damage models derived from micromechanics"; 29th International Workshop "Research in Mechanics of Composites", Bad Herrenalb (Germany); December 2016;
  • S. Wulfinghoff, M. Fassin, S. Reese; "On the irreversibility of anisotropic damage"; Zweite Sitzung der Arbeitsgruppe Simulation des DVM-Arbeitskreises, Aachen (Germany); November 2016;
  • S. Reese, D. Sodhani, S. E. Stapleton, P. Mela, S. Jockenhövel; "Tissue-engineered textile reinforced artificial aortic heart valves – multiscale modelling and experimental validation"; plenary lecture, 2016 EMI International Conference, Metz (France); October 2016;
  • S. Reese, T. Brepols, J. Simon, S. Wulfinghoff; "Schädigungs- und ein wenig Bruchmechanik: Kontinuumsmechanische Formulierung und Anwendungen"; Abschiedskolloquium für Reinhold Kienzler, Bremen (Germany); October 2016;
  • S. Reese, B. Bednarcyk, T. Brepols, Y. Li, J. Neumann, A. Radermacher, D. Sodhani, B. Stier, J.-W. Simon; "From the microstructure to the reduced model – a new multiscale approach for classical and biological composites"; plenary lecture, International Conference on Composite Structures (ICCS19), Porto (Portugal); September 2016;
  • S. Reese, D. Sodhani, A. Radermacher; "Multi-scale modelling and analysis framework of nano-particle reinforced soft composite"; keynote lecture, Material Science and Engineering, Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Application (MSE 2016), Darmstadt (Germany); September 2016;
  • J.-W. Simon, D. Höwer, B. Stier, B. Bednarcyk, E. Pineda, S. Reese, J. Fish; "Modeling damage of laminated CFRP composites on micro- and meso-scale"; 15th European Mechanics of Materials Conference (EMMC15), Brussels (Belgium); September 2016;
  • J. Kochmann, L. Ehle, S. Wulfinghoff, B. Svendsen, S. Reese; "Multiscale FE-FFT-based analysis of macroscopic material behavior and microstructural modifications in polycrystalline materials"; Special workshop on Multiscale Modeling of Heterogeneous Structures, Dubrovnik (Croatia); September 2016;
  • T. Brepols, S. Wulfinghoff, S. Reese; "Investigation of a gradient-extended damage-plasticity model in a micromorphic framework: theory and numerical examples"; Special workshop on Multiscale Modeling of Heterogeneous Structures, Dubrovnik (Croatia); September 2016;
  • O. Barfusz, D. Höwer, S. Reese; "Sustainable structures of the future – Focus on Finite-Element-Technology (FET)"; The Sixth German-Russian Week of the Young Researcher, Moscow (Russia); September 2016;
  • R. Bedzra, S. Reese, J.-W. Simon; "Multi-scale modelling of fiber reinforced composites exhibiting elastoplastic deformation"; Special workshop on Multiscale Modeling of Heterogeneous Structures, Dubrovnik (Croatia); September 2016;
  • R. Bedzra, S. Reese, J.-W. Simon; "Multi-scale modelling of fiber reinforced composites exhibiting elastoplastic deformation"; 15th European Mechanics of Materials Conference (EMMC15), Brussels (Belgium); September 2016;
  • S. Reese, J. Kochmann, S. Wulfinghoff, B. Svendsen; "A multiscale FE-FFT- and phase-field-based computational approach to predict the structural and local response of polycrystalline materials"; keynote lecture, 15th European Mechanics of Materials Conference (EMMC15), Brussels (Belgium); September 2016;
  • K. Martin, J. Neumann, S. Reese; "Simulation-based development of original road pavement materials and innovative manufacturing"; The Sixth German-Russian Week of the Young Researcher, Moscow (Russia); September 2016;
  • S. Rezaei, S. Wulfinghoff, S. Reese; "Damage and fracture in nano/micro coating layers"; 15th European Mechanics of Materials Conference (EMMC15), Brussels (Belgium); September 2016;
  • Y. Li, S. Stapleton, S. Reese, J.-W. Simon; "Microstructure modeling of paper"; Progress in Paper Physics Seminar (PPPS2016), Darmstadt (Germany); August 2016;
  • R. Bedzra, S. Reese, J.-W. Simon; "Modelling fiber reinforced composites exhibiting elastoplastic deformation"; 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montreal (Canada); August 2016;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Two-scale, FE-FFT- and phase-field-based computational homogenization"; 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montreal (Canada); August 2016;
  • S. Reese, T. Brepols, M. Fassin, S. Rezaei, J.-W. Simon, S. Wulfinghoff; "Anisotropic damage coupled with plasticity – model development and comparison with experiments"; 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal (Canada); August 2016;
  • J.-W. Simon, D. Höwer, S. Reese, J. Fish; "Modeling delamination of CFRP laminates in mode I and mode II"; 2nd Mechanics of Composites, Porto (Portugal); July 2016;
  • S. Reese, T. Brepols, J. Kochmann, A. Radermacher, J. Simon, B. Svendsen, S. Wulfinghoff; "Multiscale modelling of metallic and composite structures"; Colloquium Materials Modelling, Institut für Materialprüfung, Werkstoffkunde und Festigkeitslehre, University of Stuttgart, Stuttgart (Germany); July 2016;
  • Y. Li, S. Stapleton, S. Reese, J.-W. Simon; "Multiscale modeling of paper"; 2nd International Conference on Mechanics of Composites, Porto (Portugal); July 2016;
  • Y. Li, S. Stapleton, S. Reese, J.-W. Simon; "Multiscale modeling of paper"; 17th European Conference on Composite Materials (ECCM17), Munich (Germany); June 2016;
  • H. R. Bayat, S. Wulfinghoff, S. Reese; "Locking behavior-comparison of reduced integrated discontinuous Galerkin method with Q1SP element in linear elasticity"; 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS VII), Crete (Greece); June 2016;
  • J. Neumann, J.-W. Simon, S. Reese; "Multi-Scale Modelling of Asphalt Concrete"; 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS VII), Crete (Greece); June 2016;
  • M. Fassin, S. Wulfinghoff, S. Reese; "Damage growth criterion for anisotropic damage models using 2nd order damage tensors"; 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS VII), Crete (Greece); June 2016;
  • J.-W. Simon, D. Höwer, S. Reese; "Modeling mode I and mode II delamination in CFRP laminates"; 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS VII), Crete (Greece); June 2016;
  • J.-W. Simon, B. Stier, S. Reese; "Can the shear response of textile composites be realistically described when the tows are modelled as homogenized material?"; 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS VII), Crete (Greece); June 2016;
  • S. Reese, J. Kochmann, A. Radermacher, Y. Kiliclar, J. Simon, S. Wulfinghoff, B. Svendsen; "Simulation of manufacturing processes – phase field method, model order reduction & beyond"; plenary lecture, Second International Conference on Computational Methods in Manufacturing Processes (ICOMP2), Liege (Belgium); May 2016;
  • Y. Li, S. Reese, J.-W. Simon; "Anisotropic elastic-plastic deformation of paper"; AKstoff, Hannover (Germany); May 2016;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A regularized damage-plasticity model: micromorphic formulation and numerical aspects"; 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Braunschweig (Germany); March 2016;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Linking macroscopic deformation processes to microstructure evolution using a direct FE-FFT-based micro-macro transition and non-conserved phase-fields"; 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Braunschweig (Germany); March 2016;
  • J. Wimmer, S. Reese; "Mesomechanische Modellierung von Asphalt"; FE im Schnee 2016, Hirschegg (Austria); March 2016;
  • S. Wulfinghoff, S. Reese; "Generalized interface models with damage in gradient plasticity"; 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Braunschweig (Germany); March 2016;
  • S. Reese, J. Kochmann, A. Radermacher, B. Svendsen, S. Wulfinghoff; "Computational inelasticity at different scales - FE technology and beyond"; 7th Polish-German Winter Colloquium, La Clusaz (France); March 2016;
  • H. R. Bayat, S. Wulfinghoff, S. Reese; "Discontinuous Galerkin method with reduced integration scheme for the boundary terms in almost incompressible linear elasticity"; 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Braunschweig (Germany); March 2016;
  • L. Zhou, J.-W. Simon, S. Reese; "Nonlinear POD-based Model Order Reduction on the substructures with bonded contact for the interface coupling problems (Poster)"; Data-driven Model Order Reduction and Machine Learning (MORML 2016), Stuttgart (Germany); March 2016;
  • S. Rezaei, S. Wulfinghoff, S. Reese; "Prediction of fracture in grain boundaries of nano-coatings using cohesive zone elements"; 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Braunschweig (Germany); March 2016;
  • S. Wulfinghoff, S. Reese; "Efficient computational homogenization of simple elastoplastic microstructures using a modified Ritz-Galerkin approach"; Mechanics of Materials: Mechanics of Interfaces and Evolving Microstructure, Oberwolfach (Germany); February 2016;
  • S. Reese, J. Kochmann, A. Radermacher, S. Rezaei, D. Sodhani, J. Simon, S. Wulfinghoff; "Computational modeling from the material point to the black box"; Seminar of the Simulation-based Microstructure Design Graduate School of University Alliance Ruhr, Bochum (Germany); February 2016;
  • S. Wulfinghoff, S. Reese; "Efficient computational homogenization of simple elastoplastic microstructures using a modified Ritz-Galerkin approach"; FE im Schnee, Hirschegg (Austria); February 2016;
  • J.-W. Simon, B. Stier, B. Bednarcyk, S. Reese, J. Fish; "Modeling damage in carbon fiber reinforced composites on different scales"; European-Latin-American Conference of Theoretical and Applied Mechanics (ELACTAM), Havana (Cuba); February 2016;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Two-scale, FE-FFT- and phase-field-based modeling of microstructure evolution and macroscopic deformation processes"; ICAMS/RUB Seminar, Bochum (Germany); January 2016;
  • S. Rezaei, S. Wulfinghoff, S. Reese; "Modeling of damage behaviour in nano/micro coating layers"; ICAMS/RUB Seminar, Bochum (Germany); January 2016;
  • J.-W. Simon, B. Stier, B. Bednarcyk, S. Reese, J. Fish; "Modelling damage in undirectional and textile CFRP composites"; 28th Workshop: Research in Mechanics of Composites, Paderborn (Germany); December 2015;
  • S. Reese, D. Sodhani, P. Burla; "Mechanical modeling in medical technology - stents and heart valves"; Marie Curie Initial Training Network, Aachen (Germany); December 2015;
  • S. Reese, B. Bednarcyk, M. Fassin, A. Radermacher, J. Simon, B. Stier; "Multiscale damage modelling and lifetime analysis"; Seminar of SFB-TRR 40 "Technological foundations for the design of thermally and mechanically highly loaded components of future space transportation systems", Technical University of München, Chair of Rocket Propulsion, München (Germany); November 2015;
  • S. Reese, B. Bednarcyk, J. Kochmann, A. Radermacher, J. Simon, S. Wulfinghoff, L. Zhou; "Displacement-based multiscale modelling and substructuring by means of POD"; keynote lecture, 3rd Workshop on Reduced basis, Proper Orthogonal Decomposition & Proper Generalized Decomposition, Paris (France); November 2015;
  • D. Sodhani, P. Burla, S. Reese, F. Vogt and M. Behr; "Computational modelling of deployment of drug-eluting stents"; Hans Hermann Voss-Stiftung, Aachen (Germany); November 2015;
  • Y. Kiliclar, I. N. Vladimirov, S. Wulfinghoff, S. Reese; "Design of new technologies for the numerical simulation of combined quasi-static dynamic forming processes"; I²FG - Workshop on Electromagnetic Pulse Forming and Joining, Dortmund (Germany); October 2015;
  • J.-W. Simon, B. Stier, B. Bednarcyk, D. Höwer, S. Reese; "Modeling the nonlinear damage behavior of composites"; IRTG 1627 – Computational Mechanics Workshop, Herzogenrath (Germany); October 2015;
  • J.-W. Simon, B. Stier, B. Bednarcyk, S. Reese; "Modellierung des anisotropen Schädigungsverhaltens faserverstärkter Kunststoffe"; AG Simulation des AK Bauteilsicherheit und Bruchmechanik des DVM, Kassel (Germany); October 2015;
  • S. Rezaei, S. Wulfinghoff, S. Reese; "Failure investigation in nano-layerd coatings using cohesive zone elements"; Euromech Colloquium 570, Houffalize (Belgium); October 2015;
  • D. Sodhani, S. E. Stapleton, R. Moreira, S. Jockenhoevel, P. Mela, and S. Reese; "Effect of fibre reinforcement volume fraction and orientation on a hybrid tissue engineered tubular aortic heart valves with a leaflet design"; International Conference on Biomedical Technology 2015 (ICBT15), Hannover (Germany); October 2015;
  • S. Reese, J. Kochmann, A. Radermacher, S. Rezaei, D. Sodhani, J. Simon, S. Wulfinghoff; "Computational modeling from the material point to the black box"; plenary lecture (Koiter lecture), 18th Engineering Mechanics Symposium, Arnhem (Netherlands); October 2015;
  • S. Reese, J. Kochmann, A. Radermacher, B. Svendsen, S. Wulfinghoff; "Computational inelasticity at different scales – FE technology and beyond"; plenary lecture, 13th International Conference on Computational Plasticity, Barcelona (Spain); September 2015;
  • Y. Kiliclar, O. K. Demir, I. N. Vladimirov, C. Weddeling, S. Reese, A. E. Tekkaya; "The influence of combined sheet metal forming on the increasing formability by experimental and numerical investigations"; 13th International Conference on Computational Plasticity, Barcelona (Spain); September 2015;
  • S. Reese, D. Höwer, J. Frischkorn, M. Schwarze, J. Kochmann, A. Radermacher; "Finite element technology using reduced integration - investigations of stability and model adaptivity"; plenary lecture, X-DMS Extended Discretization Methods Conference, Ferrara (Italy); September 2015;
  • S. Wulfinghoff, S. Reese; "Efficient computational homogenization of simple elasto-plastic microstructures using a modified Ritz-Galerkin approach"; 13th International Conference on Computational Plasticity, Barcelona (Spain); September 2015;
  • S. Wulfinghoff, S. Reese; "Interface models in gradient plasticity"; French-German Workshop on Extended Continuum Theories for the Numerically Efficient Modeling of Multi-Scale Phenomena, Bochum (Germany); September 2015;
  • D. Sodhani, B. Stier, S. Reese; "Evaluating the simulation of ideal filler reinforced elastomers using full field modelling approach"; 9th European Conference on Constitutive Models for Rubbers (ECCMR IX), Prague (Czech Republic); September 2015;
  • L. Zhou, S. Reese; "A computationally efficient numerical method for the design and analysis of a geodesic dome using modular plane shell substructures"; The International Association for Shell and Spatial Structures (IASS 2015), Amsterdam (Netherlands); August 2015;
  • D. Höwer, B. Stier, S. Felder, J.-W. Simon, S. Reese; "Mode I and II delamination modelling and comparison to experiments"; 3rd ECCOMAS Young Investigators Conference on Computational Methods in Applied Sciences and 6th GACM Colloquium on Computational Mechanics, Aachen (Germany); July 2015;
  • Y. Li, J.-W. Simon, S. Stapleton, S. Reese; "Delamination in the creasing of paperboard"; 9th European Solid Mechanics Conference (ESMC9), Madrid (Spain); July 2015;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Microscopic phase-field modeling of martensitic phase transformations in polycrystals in a two-scale and FE-FFT-based framework"; 9th European Solid Mechanics Conference (ESMC9), Madrid (Spain); July 2015;
  • T. Brepols, S. Wulfinghoff, S. Reese; "Implicit gradient-enhanced damage coupled to plasticity"; 9th European Solid Mechanics Conference (ESMC9), Madrid (Spain); July 2015;
  • M. Fassin, S. Wulfinghoff, S. Reese; "Different numerical time integration schemes for elastoplasticity coupled to anisotropic damage"; The Second International Conference on Damage Mechanics (ICDM2), Troyes (France); July 2015;
  • H. R. Bayat, S. Wulfinghoff, S. Reese; "Discontinuous Galerkin analysis of displacement discontinuities for linear elasticity"; 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium, Aachen (Germany); July 2015;
  • S. Wulfinghoff, S. Reese, M. Fassin; "Comparison of different time-integration algorithms for an anisotropic damage model"; 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium, Aachen (Germany); July 2015;
  • S. Rezaei, S. Wulfinghoff, R. Kebriaei, S. Reese; "Modeling of the fracture behavior in laminated structures based on a cohesive zone element technique"; 9th European Solid Mechanics Conference (ESMC9), Madrid (Spain); July 2015;
  • S. Rezaei, S. Wulfinghoff, S. Reese; "Prediction of the fracture behavior in nano-laminated structures using a cohesive zone element technique"; 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium, Aachen (Germany); July 2015;
  • R. Bedzra, S. Reese, J.-W. Simon; "Micro-macro modelling of fiber reinforced composites exhibiting elastoplastic deformation within the framework of multisurface plasticity"; 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium, Aachen (Germany); July 2015;
  • S. Reese, S. Wulfinghoff, M. Fassin; "Anisotropic damage coupled with (visco-)plasticity - model development & FE implementation"; keynote lecture, 9th European Solid Mechanics Conference (ESMC9), Madrid (Spain); July 2015;
  • L. Zhou, S. Reese; "Shell structure analysis with model order reduction and substructure techniques"; 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium, Aachen (Germany); July 2015;
  • S. Wulfinghoff, M. Fassin, S. Reese; "Comparison of two time-integration algorithms for an anisotropic damage model coupled with plasticity"; The Second International Conference on Damage Mechanics (ICDM2), Troyes (France); July 2015;
  • J. Wimmer, S. Reese; "A 3D mesomechanical finite element model of asphalt concrete"; 9th European Solid Mechanics Conference (ESMC9), Madrid (Spain); July 2015;
  • L. Zhou, S. Reese; "Model order reduction and substructure techniques through bonded contact"; 9th European Solid Mechanics Conference (ESMC9), Madrid (Spain); July 2015;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Computational phase-field modeling of bulk microstructure evolution and direct FE-FFT-based micro-macro transition"; 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium, Aachen (Germany); July 2015;
  • T. Brepols, S. Wulfinghoff, S. Reese; "Examination of an implicit gradient-enhanced damage model coupled to elastoplasticity"; 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium, Aachen (Germany); July 2015;
  • D. Sodhani, B. Stier, S. Reese; "Multi-scale modelling of particulate composite with elastomeric matrix: determination of representative size"; European Polymer Federation Congress 2015 (EPF), Dresden (Germany); June 2015;
  • J.-W. Simon, D. Höwer, B. Stier, S. Reese; "Meso-mechanically motivated modeling of layered CFRP accounting for delamination"; 2nd International Conference on Multi-scale Computational Methods for Solids and Fluids, Sarajevo (Bosnia and Herzegovina); June 2015;
  • M. Fassin, S. Wulfinghoff, S. Reese; "Application of an elastoplastic material model coupled with anisotropic damage for the failure prediction of a rocket combustion chamber wall"; 6th European Conference for Aerospace Sciences (EUCASS6), Krakow (Poland); June 2015;
  • Y. Li, J.-W. Simon, S. Stapleton, S. Reese; "Experimental and numerical investigation of paperboard creasing"; 18th International Conference on Composite Structures (ICCS18), Lisbon (Portugal); June 2015;
  • J.-W. Simon, B. Bednarcyk, B. Stier, S. Reese; "Multiscale modeling of the damage behavior of textile composites"; 4th International Conference on Material Modeling (ICMM4), Berkeley (USA); May 2015;
  • S. Reese, S. Wulfinghoff, M. Fassin; "Anisotropic damage coupled with plasticity - model development & FE implementation"; 4th International Conference on Material Modeling (ICMM4), Berkeley (USA); May 2015;
  • D. Sodhani, B. Stier, S. Reese; "Finite element based full field micromechanical modelling of filler reinforced elastomers"; 4th International Conference on Material Modeling (ICMM4), Berkeley (USA); May 2015;
  • D. Höwer, B. Stier, J.-W. Simon, S. Reese; "Comparison of numerical results of a 3-D model accounting for mode I and II delamination with experiments"; International Conference on Advances in Composite Materials and Structures, Istanbul (Turkey); April 2015;
  • Y. Kiliclar, M. Rozgic, S. Reese, M. Stiemer; "Numerical optimization of current parameters in combined electromagnetic-classical forming processes"; 17th Annual Esaform Conference on Material Forming, Graz (Austria); April 2015;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Phase-field modeling of martensitic phase transformations in polycrystals coupled with crystal plasticity"; 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Lecce (Italy); March 2015;
  • J.-W. Simon, D. Höwer, B. Stier, S. Reese; "Predicting delamination in multilayered CFRP laminates"; 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Lecce (Italy); March 2015;
  • J.-W. Simon, B. Stier, B. Bednarcyk, S. Reese; "Micro- and meso-scale modeling of damage in textile composites"; 3rd German-Japanese Workshop on Computational Mechanics, München (Germany); March 2015;
  • T. Brepols, S. Wulfinghoff, S. Reese; "Investigation of an elastoplastic material model coupled to nonlocal damage in an implicit-gradient framework"; 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Lecce (Italy); March 2015;
  • S. Wulfinghoff, S. Reese, T. Brepols, M. Fassin; "On anisotropic and nonlocal damage models"; 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Lecce (Italy); March 2015;
  • H. R. Bayat, S. Wulfinghoff, S. Reese; "Application of the discontinuous Galerkin finite element method in small deformation regimes"; 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Lecce (Italy); March 2015;
  • S. Rezaei, S. Wulfinghoff, R. Kebriaei, S. Reese; "Application of a cohesive zone element for the prediction of damage in nano/micro coating"; 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Lecce (Italy); March 2015;
  • R. Bedzra, J.-W. Simon, B. Stier, S. Reese; "Micro-meso modeling of fiber-reinforced composites exhibiting elastoplastic deformation"; 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Lecce (Italy); March 2015;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Phase-field modeling of martensitic phase transformations in polycrystals coupled with crystal plasticity"; 2nd GAMM Seminar on Phase-field Models, Siegen (Germany); February 2015;
  • S. Reese, J. Frischkorn, R. Kebriaei, J. Kochmann, A. Radermacher, I. Vladimirov, S. Wulfinghoff; "Vom Materialpunkt zur Blackbox – skalenübergreifende Modellierung in Medizin- und Produktionstechnik"; Colloquium of the Sonderforschungsbereich 926 Microscale Morphology of Component Surfaces, Kaiserslautern (Germany); February 2015;
  • J. Kochmann, S. Wulfinghoff, B. Svendsen, S. Reese; "Two-scale FE-FFT- and phase-field-based computational modeling of microstructure evolution and macroscopic material behavior"; Euromech Colloquium 559, Eindhoven (Netherlands); February 2015;
  • J.-W. Simon, B. Stier, B. Bednarcyk, E. Pineda, S. Reese; "Modeling of damage in textile composites on different scales"; International Symposium on Plasticity, Damage and Fracture, Montego Bay (Jamaica); January 2015;
  • J.-W. Simon, B. Bednarcyk, B. Stier, S. Reese; "Multiscale modeling of damage in textile composites"; 27th Workshop: Research in Mechanics of Composites, Bad Herrenalb (Germany); December 2014;
  • S. Stapleton; "Manufacturing-inspired composite characterization and modelling"; Department Seminar, Department of Mechanical and Nuclear Engineering, Kansas State University, Manhattan (USA); December 2014;
  • J. Kochmann, S. Wulfinghoff, S. Reese, B. Svendsen; "Phase-field modeling of martensitic phase transformations in polycrystals based on fast Fourier transforms in a two-scale framework"; LTM Seminar, Kaiserslautern (Germany); November 2014;
  • D. Sodhani, B. Stier, S. Reese; "Finite element based micro-mechanical modelling of filler reinforced elastomers"; 11th Rubber Fall Colloquium/Kautschuk Herbst Kolloquium (KHK11), Hannover (Germany); November 2014;
  • S. Reese, J. Frischkorn, R. Kebriaei, J. Kochmann, A. Radermacher, I. Vladimirov, S. Wulfinghoff; "Vom Materialpunkt zur Blackbox – skalenübergreifende Modellierung in Medizin- und Produktionstechnik"; Symposium on Computational Mechanics - Methods and Applications, Akademie der Wissenschaften und der Literatur Mainz, Mainz (Germany); November 2014;
  • B. A. Bednarcyk, B. Stier, E. J. Pineda, J. Simon, S. Reese; "Modeling damage in textile composites using meso- and microscale approaches"; International Mechanical Engineering Congress & Exposition, ASME, Montreal (Canada); November 2014;
  • Y. Kiliclar, I. N. Vladimirov, S. Reese; "Combined quasi-static-electromagnetic forming process - Material modelling, increasing formability and damage treatment"; Metal Forming 2014, Palermo (Italy); September 2014;
  • R. Kebriaei, A. Mikloweit, I. N. Vladimirov, M. Bambach, S. Reese, G. Hirt; "A cohesive zone model for simulation of the bonding and debonding in metallic composite structures"; Metal Forming 2014, Palermo (Italy); September 2014;
  • J. Kochmann, J. Rezaeimianroodi, S. Reese, B. Svendsen; "Fourier-transform based phase-field modeling coupled with the finite element method"; 14th European Mechanics of Materials Conference, Gothenburg (Sweden); August 2014;
  • D. Sodhani, S. Reese; "Finite element based micro-mechanical modelling of interphase in filler reinforced elastomers"; 14th European Mechanics of Materials Conference, Gothenburg (Sweden); August 2014;
  • D. Höwer, A. Geßler, J.-W. Simon, S. Reese, M. Feldmann; "Finite Element Technology for Steel-Elastomer-Sandwiches"; 11th World Congress on Computational Mechanics (WCCM11), Barcelona (Spain); July 2014;
  • J. Kochmann, J. Rezaeimianroodi, S. Reese, B. Svendsen; "Fourier-transform based phase-field modeling coupled with the finite element method"; 8th GAMM-Seminar on Multiscale Material Modeling, Hamburg (Germany); July 2014;
  • J.-W. Simon, B. Stier, S. Reese; "Multiscale modeling of laminated composites with textile reinforcement"; 8th GAMM-Seminar on Multiscale Material Modeling, Hamburg (Germany); July 2014;
  • J.-W. Simon, Y. Li, S. Reese; "Modeling the creasing of paperboard"; 11th World Congress on Computational Mechanics (WCCM11), Barcelona (Spain); July 2014;
  • S. Reese, J. Frischkorn; "Reduced integration with hourglass stabilization – issues of stability and robustness"; 11th World Congress on Computational Mechanics (WCCM11), Barcelona (Spain); July 2014;
  • T. Brepols, I. N. Vladimirov, S. Reese; "Hypo- and hyperelastic-based approaches in finite strain elastoplasticity with application to industrial forming processes"; 1st International Workshop on Software Solutions for ICME, Rolduc (Netherlands); June 2014;
  • S. Reese; "Introduction – simulation of joining processes"; 6th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation (ICTMP), Darmstadt (Germany); June 2014;
  • S. Reese, D. Sodhani; "Finite element micro-field simulation illustrating the effect of micro-structure morphology on stress softening in filled elastomer networks"; guest lecture in Department of Applied Mechanics, Chalmers University of Technology, Gothenburg (Sweden); June 2014;
  • B. Stier, B. Bednarcyk, J.-W. Simon, S. Reese; "Modeling of damage at the meso- and micro-scale in textile composites"; 17th U.S. National Congress on Theoretical & Applied Mechanics, Lansing (USA); June 2014;
  • B. A. Bednarcyk, B. Stier, E. J. Pineda, J. Simon, S. Reese; "Meso- and micro-scale modeling of damage in textile composites"; 1st International Conference on Mechanics of Composites (ICMC1), Stony Brook (USA); June 2014;
  • J.-W. Simon, D. Höwer, B. Stier, S. Reese; "Meso-mechanically motivated modeling of layered fiber reinforced composites accounting for delamination"; 1st International Conference on Mechanics of Composites (ICMC1), Stony Brook (USA); June 2014;
  • R. Kebriaei, I. N. Vladimirov, S. Reese; "Multiscale modeling of joining processes with application to roll bonding"; 6th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation (ICTMP), Darmstadt (Germany); June 2014;
  • R. Kebriaei, I. N. Vladimirov, S. Reese; "Experimental chemo-mechanical characterization and multiscale modeling of the alloys AA1050, AA2024 and AA5754 - application to roll bonding"; 17th Annual Esaform Conference on Material Forming, Espoo (Finland); May 2014;
  • T. J. Grilo, I. N. Vladimirov, R. A. F. Valente, S. Reese; "Modelling non-quadratic anisotropic yield criteria and mixed isotropic-nonlinear kinematic hardening at finite strains"; 17th Annual Esaform Conference on Material Forming, Espoo (Finland); May 2014;
  • I. N. Vladimirov, M. P. Pietryga, S. Reese; "On the use of explicit and implicit exponential map algorithms of finite strain combined hardening plasticity in the simulation of draw bending"; 17th Annual Esaform Conference on Material Forming, Espoo (Finland); May 2014;
  • S. Reese, D. Sodhani; "Finite element micro-field simulation illustrating the effect of micro-structure morphology on stress softening in filled elastomer networks"; 14th Dresden Polymer Discussion, Meißen (Germany); May 2014;
  • M. Fassin, V. Tini, I. Vladimirov, S. Reese; "Lebensdauervorhersage einer Raketenbrennkammerwand mit einem viskoplastischen Schädigungsmodell"; Arbeitskreis Stoffgesetze, Geesthacht (Germany); May 2014;
  • T. Brepols, I. N. Vladimirov, S. Reese; "Anwendungen von hypo- und hyperelastisch-basierten Modellen finiter Elastoplastizität in der Umformtechnik"; Arbeitskreis Stoffgesetze, Geesthacht (Germany); May 2014;
  • L. Renken, J. Wimmer; "Simulationsgestützte Entwicklung neuer Straßenbaustoffe und innovativer Herstellungs- und Einbautechnologien"; 2te Innovationsarena der Bundesanstalt für Straßenwesen (BASt), Bergisch-Gladbach (Germany); April 2014;
  • M. Fassin, V. Tini, I. Vladimirov, S. Reese; "Lifetime prediction of a rocket combustion chamber wall by a viscoplastic damage model"; 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • Y. Li, J.-W. Simon, S. Reese; "Experimental and numerical investigation of paperboard creasing"; 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • J. Kochmann, J. Rezaeimianroodi, S. Reese, B. Svendsen; "Two-dimensional elastic phase-field simulation of fcc to bcc martensitic phase transformations in polycrystals"; 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • J. Wimmer, J. Schnepp, S. Reese; "Modelling and simulation of asphalt"; 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • S. Reese, J. Frischkorn, R. Kebriaei, J. Kochmann, A. Radermacher, I. Vladimirov; "Scale transitions in multifield problems – applications in production technology and biomechanics"; plenary lecture, 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • S. Reese, A. Radermacher; "Macro-“holo” transitions in non-linear solid mechanics"; 6th Polish-German Winter Colloquium, La Clusaz (France); February 2014;
  • S. Reese, A. Radermacher; "Projection-based model reduction - applications in non-linear solid mechanics"; International Symposium on "Reduced Order Models in Computational Science and Engineering", Aachen (Germany); January 2014;
  • S. Reese, D. Sodhani; "Finite element-based modelling to demonstrate the influence of micro-mechanical phase interactions on filler reinforced elastomers"; keynote lecture, International Symposium on Plasticity and Its Current Applications, Freeport (Bahamas); January 2014;
  • J.-W. Simon, B. Stier, S. Reese; "Multiscale modeling of fiber reinforced laminated composites"; 26th Workshop: Research in Mechanics of Composites, Paderborn (Germany); December 2013;
  • S. Reese, A. Radermacher; "POD-based model reduction in biomechanics and forming processes"; 2nd International Workshop on Reduced Basis, POD and PGD, Blois (France); November 2013;
  • A. Radermacher, S. Reese; "Sub-structuring combined with POD - applied to incremental sheet metal forming simulations"; 2nd International Workshop on Reduced Basis, POD and PGD, Blois (France); November 2013;
  • S. Reese, J. Frischkorn; "Modeling of stents by means of a new solid-beam finite element technology"; International Conference on Biomedical Technology (ICBT), Hannover (Germany); November 2013;
  • S. Reese, A. Radermacher; "Projection-based model reduction in non-linear solid mechanics - application in biomechanics and beyond"; Colloquium of the Cluster of Excellence “Simulation Technology”, Stuttgart (Germany); November 2013;
  • Y. Kiliclar, O. K. Demir, I. N. Vladimirov, L. Kwiatkowski, S. Reese, A. E. Tekkaya; "Application of a viscoplastic material model on a combined quasi-static and electromagnetic forming process"; International Impulse Forming Group (I²FG), Chemnitz (Germany); November 2013;
  • J.-W. Simon; "The influence of kinematical hardening on incremental collapse, alternating plasticity, and the corresponding residual stress fields"; 4th International Workshop on Direct Methods, Reggio Calabria (Italy); October 2013;
  • S. Reese, D. Sodhani; "Finite element micro-field simulation illustrating the effect of stress softening"; plenary lecture, Elastomery 2013 “Science and Industry”, 15th International Science and Technology Conference, Warsaw (Poland); October 2013;
  • A. Radermacher, S. Reese; "Selective POD-based model reduction techniques for incremental sheet metal forming simulations"; Aachen Conference on Computational Engineering Science 2013, Aachen (Germany); September 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Multiscale modeling of layered fiber reinforced composites accounting for delamination"; 8th German-Greek-Polish Symposium on Recent Advances in Mechanics, Goslar (Germany); September 2013;
  • S. Reese, Y. Kiliclar, I. N. Vladimirov; "A new anisotropic model of coupled damage-viscoplasticity - application in electromagnetic forming processes"; 3rd International Conference on Material Modelling (ICMM3), Warsaw (Poland); September 2013;
  • S. Reese, Y. Kiliclar, I. N. Vladimirov; "Combined quasi-static deep drawing and electromagnetic forming – new material modeling and numerical treatment"; 12th International Conference on Computational Plasticity, Barcelona (Spain); September 2013;
  • J. Schnepp; "Gradient theories, micromorphic theories, and continuum theories of defects - A comparison considering thermodynamic coupling"; 12th International Conference on Computational Plasticity (COMPLAS12), Barcelona (Spain); September 2013;
  • J. Schnepp; "Lagrangian functions for defects in three- and four-dimensional material manifolds"; 3rd International Conference on Material Modelling (ICMM3), Warsaw (Poland); September 2013;
  • I. N. Vladimirov, M. P. Pietryga, S. Reese; "Efficient FE strategies for springback prediction – material modelling and computational aspects"; 12th International Conference on Computational Plasticity, Barcelona (Spain); September 2013;
  • I. N. Vladimirov, M. Pietryga, S. Reese, Y. Kiliclar, V. Tini, T. Brepols, R. Kebriaei; "Anisotropic finite strain elastoplasticity with application to metal forming processes"; plenary lecture, 12th National Conference on Theoretical and Applied Mechanics, St. St. Constantine and Helena (Bulgaria); September 2013;
  • J. Wimmer, J. Schnepp, S. Reese; "Geometric modelling of asphalt concrete"; 5th GACM Colloquium on Computational Mechanics, Hamburg (Germany); September 2013;
  • S. Reese, D. Sodhani; "Finite element micro-field simulation illustrating the effect of filler-filler interaction on stress softening in filled elastomers"; International Conference on Polymer Interphases & Interfaces, Frankfurt (Germany); September 2013;
  • M. Fassin, I. Münch; "Simulation of magneto-elastic material"; 5th GACM Colloquium on Computational Mechanics, Hamburg (Germany); September 2013;
  • Y. Li, J.-W. Simon, S. Reese; "Microsphere-based homogenization for unidirectional fiber reinforced composites"; 5th GACM Colloquium on Computational Mechanics, Hamburg (Germany); September 2013;
  • R. Kebriaei, I. N. Vladimirov, S. Reese; "New mechanisms for joining and coating of dissimilar metals-application to sheet and bulk metal forming"; 5th GACM Colloquium on Computational Mechanics, Hamburg (Germany); September 2013;
  • B. Stier, J.-W. Simon, S. Reese; "Experimental and numerical investigation of woven carbon fiber reinforced plastics"; Composites Week @ Leuven and TexComp-11 Conference, Leuven (Belgium); September 2013;
  • A. Radermacher, S. Reese; "POD-based model reduction in biomechanics and forming processes"; 1st International Workshop on Order-Reduction Methods for Application to Mechanics of Materials (WORM2013), Bad Herrenalb (Germany); August 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Evaluating layered fiber composite structures accounting for the onset of delamination"; 19th International Conference on Composite Materials (ICCM19), Montreal (Canada); July 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Meso-mechanically motivated modeling of layered fiber reinforced composites accounting for the onset of delamination"; 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh (USA); July 2013;
  • I. N. Vladimirov, M. P. Pietryga, S. Reese; "Constitutive modelling and numerical aspects of simulating springback in sheet metal forming"; 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh (USA); July 2013;
  • B. Stier, J.-W. Simon, S. Reese; "Meso-mechanical investigation of woven carbon fiber reinforced plastics"; 19th International Conference on Composite Materials (ICCM19), Montreal (Canada); July 2013;
  • B. Stier, J.-W. Simon, S. Reese; "Comparison of numerical and experimental results of woven fiber reinforced plastics at the meso scale"; 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh (USA); July 2013;
  • D. Sodhani, S. Reese; "Finite element micro-field simulation illustrating the effect of filler-filler interaction on stress softening in filled elastomers"; 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh (USA); July 2013;
  • B. Stier, J.-W. Simon, S. Reese; "Comparing experimental results to a meso scale approach of woven fiber reinforced plastics"; GAMM Multiscale Material Modeling Seminar, Dresden (Germany); June 2013;
  • M. Rozgic, M. Stiemer, Y. Kiliclar, I. N. Vladimirov, S. Reese; "Numerical algorithms for the identification of optimal parameters in material models for industrial forming processes"; SIAM Conference on Mathematical Aspects of Materials Science, Philadelphia (USA); June 2013;
  • J.-W. Simon; "On the restrictions of kinematical hardening laws in lower bound shakedown analysis"; Euromech Colloquium 548: Direct and Variational Methods for Nonsmooth Problems in Mechanics, Amboise (France); June 2013;
  • J. Wimmer, J. Schnepp, J.-W. Simon, S. Reese; "Simulationsgestützte Entwicklung neuer Straßenbaustoffe und innovativer Herstellungs- und Einbauverfahren"; GAMM Multiscale Material Modeling Seminar, Dresden (Germany); June 2013;
  • D. Sodhani, S. Reese; "Finite element based micro-mechanical modelling of micro-structure morphology in filler reinforced elastomer"; 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastian (Spain); June 2013;
  • S. Reese, R. Kebriaei; "Advanced material and structural behavior in innovative forming processes – application to process-integrated ring rolling"; keynote lecture, Computational Methods for Coupled Problems in Science and Engineering, Santa Eulalia (Spain); June 2013;
  • T. Brepols, I. N. Vladimirov, S. Reese; "Comparison of hyper- and hypoelastic-based formulations of elastoplasticity with applications to metal forming"; 16th Annual ESAFORM Conference on Material Forming, Aveiro (Portugal); April 2013;
  • Y. Kiliclar, O. K. Demir, I. N. Vladimirov, L. Kwiatkowski, S. Reese, A. E. Tekkaya; "Simulation of electromagnetic forming of a cross shaped cup by means of a viscoplasticity model coupled with damage at finite strains"; 16th Annual Esaform Conference on Material Forming, Aveiro (Portugal); April 2013;
  • I. N. Vladimirov, S. Reese; "Prediction of springback in unconstrained bending by a model for evolving elastic and plastic anisotropy"; 16th Annual Esaform Conference on Material Forming, Aveiro (Portugal); April 2013;
  • R. Kebriaei, I. N. Vladimirov, S. Reese; "Material modeling and numerical analysis of the heat treatment in high carbon steels-application to ring rolling"; 16th Annual Esaform Conference on Material Forming, Aveiro (Portugal); April 2013;
  • A. Radermacher, S. Reese, A. Hadoush; "Selective proper orthogonal decomposition model reduction for forming simulations"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • Y. Kiliclar, O. K. Demir, I. N. Vladimirov, L. Kwiatkowski, S. Reese, A. E. Tekkaya; "Application of a viscoplastic material model on a combined quasi-static and electromagnetic forming process"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Predicting the onset of delamination in layered fiber-reinforced composites"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • I. N. Vladimirov, M. Bambach, M. Herty, H. M. Bücker; "Identification of optimal material models and parameters in finite strain plasticity"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • T. Brepols, I. N. Vladimirov, S. Reese; "Application and evaluation of hyper- and hypoelastic-based plasticity models in the FE simulation of metal forming processes"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • I. N. Vladimirov, S. Reese; "A finite strain model for evolving elastic and plastic anisotropy with application to deep drawing processes"; International Symposium on Plasticity 2013, Nassau (Bahamas); January 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Numerical evaluation of fiber composites accounting for delamination"; 25th International Workshop: Research in Mechanics of Composites, Bad Herrenalb (Germany); December 2012;
  • A. Radermacher, S. Reese; "POD based model reduction method in nonlinear biomechanics - on an application to a model of an inferior turbinate"; Second International Workshop on Model Reduction for Parametrizied Systems (MoRePaS II), Günzburg (Germany); October 2012;
  • S. Reese, J. Frischkorn, R. Kebriaei, A. Radermacher, V. Tini; "Scale transitions by means of model reduction - applications in production technology and biomechanics"; Symposium Multi scale modeling, KIVI NIRIA, Eindhoven (The Netherlands); October 2012;
  • S. Reese, J. Frischkorn, R. Kebriaei, A. Radermacher, V. Tini; "Scale transitions in biomechanics and production technology by means of model reduction"; semi-plenary lecture, European Congress on Computational Methods on Applied Sciences and Engineering (ECCOMAS), Wien (Austria); September 2012;
  • J.-W. Simon, B. Stier, S. Reese; "Numerical Analysis of the Initiation of Delamination in Fibre Composites"; 11th International Conference on Computational Structures Technology, Dubrovnik (Croatia); September 2012;
  • J.-W. Simon; "Shakedown analysis in n-dimensional loading spaces with kinematical hardening"; 11th International Conference on Computational Structures Technology, Dubrovnik (Croatia); September 2012;
  • B. Stier, S. Reese; "Verification of a mesomechanically motivated constitutive law for FRP"; European Congress on Computational Methods on Applied Sciences and Engineering (ECCOMAS), Wien (Austria); September 2012;
  • J. Frischkorn, S. Reese; "A novel solid-beam finite element for the simulation of nitinol stents"; European Congress on Computational Methods on Applied Sciences and Engineering (ECCOMAS), Wien (Austria); September 2012;
  • S. Reese, A. Radermacher, B. Stier, I. N. Vladimirov; "Material modelling (metals and FRP) and finite element technology - application to production processes"; Guest lecture in SFB/TR 39, Chemnitz (Germany); August 2012;
  • S. Reese, A. Radermacher; "A new strategy for model reduction in non-linear biomechanics"; 23rd International Conference on Theoretical and Applied Mechanics (ICTAM), Beijing (China); August 2012;
  • V. Tini, I. N. Vladimirov, S. Reese; "Lifetime Prediction Of Rocket Combustion Chamber Wall By Means Of Viscoplasticity Coupled With Ductile Isotropic Damage"; ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA2012), Nantes (France); July 2012;
  • I. N. Vladimirov, S. Reese; "Finite Strain Constitutive Model of Evolving Elastic and Plastic Anisotropy by Means of Structure Tensors"; ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA2012), Nantes (France); July 2012;
  • J. Schnepp; "On the Thermodynamic Coupling in the Continuum Theory of Defects"; ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA2012), Nantes (France); July 2012;
  • A. Radermacher, S. Reese; "Model reduction for nonlinear biomechanics based on the proper orthogonal decomposition method"; 8th European Solid Mechanics Conference, Graz (Austria); July 2012;
  • R. Kebriaei, J. Frischkorn, I. Vladimirov, S. Reese; "Temperature-induced phase transformations in finite-strain plasticity applied to wear resistant coatings"; 8th European Solid Mechanics Conference, Graz (Austria); July 2012;
  • I. N. Vladimirov, S. Reese; "Material modelling of evolving elastic and plastic anisotropy with application to deep drawing processes"; 10th World Congress on Computational Mechanics WCCM 2012, Sao Paulo (Brazil); July 2012;
  • J.-W. Simon, B. Stier, S. Reese; "Determination of initiation of delamination in fiber composites"; 10th World Congress on Computational Mechanics (WCCM 10), Sao Paolo (Brazil); July 2012;
  • S. Reese, I. N. Vladimirov, A. Radermacher; "Anisotropic damage-plasticity at different scales using model reduction - application to production processes"; Forming Technology Forum, Zürich (Switzerland); June 2012;
  • V. Brinnel, S. Münstermann, W. Bleck, M. Feldmann, S. Reese; "Structural requirements and material solutions for sustainable buildings"; 6th International Conference on Society and Materials, Leuven (Belgium), May 2012;
  • J.-W. Simon, B. Stier, S. Reese; "Applying the solid-shell concept to thin fibre composite structures"; 7th International Conference on Computational Mechanics for Spatial Structures (IASS-IACM), Sarajevo (Bosnia and Herzegovina); April 2012;
  • A. Radermacher, S. Reese; "Model reduction methods in nonlinear biomechanical solid mechanics"; CMBBE 2012, Berlin (Germany); April 2012;
  • J. Frischkorn, S. Reese; "New solid-shell and solid-beam finite elements and their application towards the simulation of stent implantation"; ECCOMAS Young Investigators Conference, Aveiro (Portugal); April 2012;
  • J.-W. Simon, B. Stier, S. Reese; "Evaluating fibre composite structures using the solid-shell concept"; 1st ECCOMAS Young Investigators Conferences (YIC), Aveiro (Portugal); April 2012;
  • A. Radermacher, S. Reese; "Proper orthogonal decomposition based model reduction for nonlinear biomechanical structural analysis"; ECCOMAS Young Investigators Conference, Aveiro (Portugal); April 2012;
  • Y. Kiliclar, O. K. Demir, I. N. Vladimirov, L. Kwiatkowski, A. Brosius, S. Reese, A. E. Tekkaya; "Combined simulation of quasi-static deep drawing and electromagnetic forming by means of a coupled damage–viscoplasticity model at finite strains"; ICHSF 2012, Dortmund (Germany); April 2012;
  • I. N. Vladimirov, S. Reese; "Influence of evolving anisotropy on earing in cylindrical cup drawing"; ECCOMAS Young Investigators Conference, Aveiro (Portugal); April 2012;
  • V. Tini, I. N. Vladimirov, S. Reese; "Lifetime analysis of a rocket combustion chamber wall by means of viscoplasticity coupled with anisotropic damage"; ECCOMAS Young Investigators Conference 2012, Aveiro (Portugal); April 2012;
  • V. Tini, I. N. Vladimirov, S. Reese; "Influence of anisotropic damage on the lifetime prediction of regeneratively cooled nozzle structure"; Space Propulsion 2012 Conference, Bordeaux (France); May 2012;
  • B.Stier, S. Reese; "Solid-shell concept applied to thin fibre composite structures"; ECCM 15th European Conference on Composite Materials, Venice (Italy); June 2012;
  • J. Wimmer, S. Reese; "Applying the solid shell concept to sandwich structures - a comparison of different formulations"; ECCM 15th European Conference on Composite Materials, Venice (Italy); June 2012;
  • Y. Kiliclar, M. Engelhardt, I. Vladimirov, M. Pietryga, H. von Senden genannt Haverkamp, S. Reese, Fr.-W. Bach; "On the improvement of formability and the prediction of forming limit diagrams at fracture by means of constitutive modelling"; Esaform 2012, Erlangen (Germany); March 2012;
  • I. N. Vladimirov, M. Pietryga. V. Tini, S. Reese; "On the modeling of evolving elastic and plastic anisotropy in the finite strain regime – application to deep drawing processes"; Esaform 2012, Erlangen (Germany); March 2012;
  • I. N. Vladimirov, S. Reese; "Production simulation by means of a structure tensor-based framework of anisotropic plasticity – numerical aspects and experimental validation"; GAMM 2012, Darmstadt (Germany); March 2012;
  • J. Schnepp; "On the connection of dissipation and deviatoric stress in the continuum theory of defects"; GAMM 2012, Darmstadt (Germany); March 2012;
  • R. Kebriaei, J. Frischkorn, S. Reese; "Coupled thermo-mechanical analysis of process-integrated powder coating by means of hot rolling"; Esaform 2012, Erlangen (Germany); March 2012;
  • R. Kebriaei, J. Frischkorn, S. Reese; "Effects of heat treatment on the phase transformation in powder metallurgical multi-functional coating"; GAMM 2012, Darmstadt (Germany); March 2012;
  • M. Pagani, S. Reese, U. Perego; "Explicit simulation of forming processes using a novel solid-shell concept based on reduced integration"; Esaform 2012, Erlangen (Germany); March 2012;
  • A. Radermacher, S. Reese; "Model-based therapy - new methods of model reduction for non-linear mechanics"; GAMM 2012, Darmstadt (Germany); March 2012;
  • J. Wimmer, S. Reese; "Solid shell finite elements for tesselated geometries – an application to sandwich core compression"; 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Darmstadt (Germany); March 2012;
  • D. Sodhani, S. Reese; "Finite element simulation of filler reinforced elastomers"; GAMM 2012, Darmstadt (Germany); March 2012;
  • S. Reese; "Constitutive polymer models"; Advanced School SPP 1369 Polymer-Solid Contacts: Interfaces and Interphases, Erlangen (Germany); March 2012;
  • S. Reese; "Continuum simulation of polymers"; Advanced School SPP 1369 Polymer-Solid Contacts: Interfaces and Interphases, Erlangen (Germany); March 2012;
  • D. Sodhani, S. Reese; "3D Finite element modelling of filler reinforced elastomers (Poster)"; ECCM 15th European Conference on Composite Materials, Venice (Italy); June 2012;
  • D. Sodhani, S. Reese; "Modeling the effect of filler-filler interaction on the reinforcement of filled rubber using finite element method"; Rubber in engineering group, London (UK); December, 2012;
  • D. Sodhani, S. Reese; "Finite element analysis of filler reinforced elastomers"; 6th GAMM seminar on multiscale material modeling, Magdeburg (Germany); September, 2012;
  • A. Radermacher, S. Reese; "Model reduction in nonlinear biomechanics"; Workshop on "Advanced Computational Engineering", Mathematical Research Institute, Oberwolfach (Germany), February 2012;
  • S. Reese, J. Frischkorn, D. Juhre, R. Kebriaei, Y. Kiliclar, M. Pietryga, A. Radermacher, M. Schwarze, B. Stier, J. Schnepp, J. Simon, D. Sodhani, V. Tini, I. N. Vladimirov, J. Wimmer; "Mechanik - eine interdisziplinäre Herausforderung"; Antrittsvorlesung, Fakultät für Bauingenieurwesen, Aachen (Germany), January 2012;
  • J.-W. Simon, D. Sodhani, B. Stier, J. Wimmer, S. Reese; "Experimental and numerical analysis of fibre composite failure"; 24th Workshop: Research in Mechanics of Composites, Paderborn (Germany), December 2011;
  • S. Reese, J. Frischkorn, R. Kebriaei, M. Pietryga, A. Radermacher, M. Schwarze, B. Stier, V. Tini, I. N. Vladimirov; "Computersimulation in der Produktions- und Medizintechnik - innovative Strategien und Visionen aus Sicht der Mechanik"; Nordrhein-Westfälische Akademie der Wissenschaften und der Künste, Düsseldorf (Germany), December 2011;
  • I. N. Vladimirov, S. Reese; "Large deformation modelling and simulation of fracture limits of anisotropic sheet metals"; 5th International Conference on Advanced COmputational Methods in ENgineering ACOMEN 2011, Liege (Belgium), November 2011;
  • R. Kebriaei, J. Frischkorn, S. Reese; "A new method of intelligent control for system stabilization in process-integrated powder coating by radial axial rolling of rings"; 5th International Conference on Advanced COmputational Methods in ENgineering ACOMEN 2011, Liege (Belgium), November 2011;
  • S. Reese, V. Tini, Y. Kiliclar, I.N. Vladimirov; "Finite deformation damage modelling in challenging applications - forming limit diagrams and life time analysis for a rocket thrust chamber"; 5th International Conference on Advanced COmputational Methods in ENgineering ACOMEN 2011, Liege (Belgium), November 2011;
  • J. Frischkorn, S. Reese; "Finite element technology for stents made of shape memory alloys and polymers"; 11th International Conference on Computational Plasticity, Barcelona (Spain), September 2011;
  • S. Reese, V. Tini, I. Vladimirov, Y. Kiliclar; "Finite deformation damage modelling in challenging applications - forming limit diagrams and life time analysis for a rocket thrust chamber"; 11th International Conference on Computational Plasticity, Barcelona (Spain), September 2011;
  • S. Reese, J. Frischkorn, D. Juhre, M. Schwarze; "Finite element technology for stents made of shape memory alloys and polymers"; Trends & Challenges in Computational Mechanics, Padova (Italy), September 2011;
  • R. Kebriaei, J. Frischkorn, S. Reese; "Influence of geometric parameters on residual porosity in process-integrated powder coating by radial axial rolling of rings"; 10th International Conference on Technology of Plasticity, Aachen (Germany), September 2011;
  • R. Kebriaei, J. Frischkorn, S. Reese; "Finite element simulation of process-integrated powder coating by radial axial rolling of rings"; 2nd International Symposium on Functional Surfaces, Aachen (Germany), September 2011;
  • I. N. Vladimirov, M. Pietryga, S. Reese; "Prediction of forming limit diagrams at fracture by an anisotropic finite plasticity model with ductile damage"; 10th International Conference on Technology of Plasticity, Aachen (Germany), September 2011;
  • M. Pietryga, I. N. Vladimirov, S. Reese; "Continuum mechanical material modelling of evolving flow anisotropy including experimental validation"; 2nd International Conference on Material Modelling, Paris (France), September 2011;
  • J. Schnepp; "Defects and dissipation in a four-dimensional material manifold"; 2nd International Conference on Material Modelling, Paris (France), September 2011;
  • Y. Kiliclar, R. Laurischkat, I. N. Vladimirov, S. Reese; "Prediction of path deviation in robot based incremental sheet metal forming by means of a new solid-shell finite element technology and a finite elastoplastic model with combined hardening"; Numisheet 2011, Seoul (Korea), August 2011;
  • A. Radermacher, S. Reese; "Model reduction for non-linear finite element analysis applied to biomechanical structural mechanics"; 4th GACM Colloquium on Computational Mechanics, Dresden (Germany), August-September 2011;
  • J. Frischkorn, S. Reese; "New solid-shell and solid-beam finite elements with applications to thermomechanically coupled problems in biomechanics"; 4th GACM Colloquium on Computational Mechanics, Dresden (Germany), August-September 2011;
  • A. Radermacher, S. Reese; "Finite element analysis combined with model reduction to simulate soft tissue"; Aachen Conference on Computational Engineering Science (AC.CES), Aachen (Germany), July 2011;
  • V. Tini, D. Kowollik, M. Haupt, S. Reese; "Application of a viscoplastic damage model in a coupled 3D FSI analysis of the hot gas flow in a rocket thrust chamber"; 4th European Conference for Aerospace Sciences, St. Petersburg (Russia), July 2011;
  • A. Radermacher, S. Reese; "Nonlinear finite element analysis of a biomechanical structure combined with model reduction"; 11th U.S. National Congress on Computational Mechanics, Minneapolis (USA), July 2011;
  • M. Bambach, M. Bücker, S. Heppner, M. Herty, I. N. Vladimirov; "A method to identify constitutive equations and material parameters"; Aachen Conference on Computational Engineering Science (AC.CES), Aachen (Germany), July 2011;
  • I. N. Vladimirov, M. Pietryga, S. Reese; "Anisotropic damage-plasticity at different scales - modelling of metal forming and single crystal superalloys"; 11th U.S. National Congress on Computational Mechanics, Minneapolis (USA), July 2011;
  • V. Tini, I. N. Vladimirov, S. Reese; "Application of a viscoplastic damage model for the failure prediction of regeneratively cooled nozzle structures"; IV International Conference on Computational Methods for Coupled Problems in Science and Engineering, Kos (Greece), June 2011;
  • R. Kebriaei, J. Frischkorn, S. Reese; "Coupled simulation of process-integrated powder coating by radial axial rolling of rings"; IV International Conference on Computational Methods for Coupled Problems in Science and Engineering, Kos (Greece), June 2011;
  • B. Stier, S. Reese; "DIC measurements - a comperison of different methods to evaluate three-dimensional deformation states"; 10th Youth Symposium on Experimental Solid Mechanics, Chemnitz (Germany), May 2011;
  • A. Radermacher, S. Reese; "Model reduction for nonlinear biomechanical structural analysis"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011;
  • R. Kebriaei, J. Frischkorn, S. Reese; "Application of PID control unit for system stabilization in process-integrated powder coating by radial axial rolling of rings"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011;
  • J. Frischkorn, S. Reese; "New solid-shell and solid-beam finite elements with applications to medical technology"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011;
  • J. Frischkorn, R. Kebriaei, S. Reese; "Finite element modelling of process-integrated powder coating by radial axial rolling of rings"; The 14th International ESAFORM Conference on Material Forming, Belfast (Northern Ireland), April 2011;
  • M. Pietryga, I. N. Vladimirov, S. Reese; "Constitutive modelling of evolving flow anisotropy including distortional hardening"; The 14th International ESAFORM Conference on Material Forming, Belfast (Northern Ireland), April 2011;
  • I. N. Vladimirov, V. Tini, Y. Kiliclar, S. Reese; "On the material modelling of anisotropy, hardening and failure of sheet metals in the finite strain regime"; The 14th International ESAFORM Conference on Material Forming, Belfast (Northern Ireland), April 2011;
  • I. N. Vladimirov, Y. Kiliclar, V. Tini, S. Reese; "Constitutive modelling of anisotropy, hardening and failure of sheet metals"; SheMet2011, Leuven (Belgium), April 2011;
  • J. Schnepp; "Thermodynamics in material space-time"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011;
  • B. Stier, S. Reese; "Verification of an optical metrology system (Aramis) by comparing experimental data with FE calculations and continuum approaches"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011;
  • Y. Kiliclar, I. N. Vladimirov, R. Laurischkat, M. Schwarze, S. Reese, H. Meier; "Constitutive modelling and finite element technology for the simulation of robot based incremental sheet metal forming"; SheMet2011, Leuven (Belgium), April 2011;
  • S. Reese; "Stabilitätsprobleme in der Finite-Elemente-Technologie"; 60th Birthday Colloquium of Prof. Peter Wriggers, Hannover (Germany), February 2011;
  • S. Reese, J. Frischkorn, Y. Kiliclar, M. Pietryga, A. Radermacher, M. Schwarze, V. Tini, I. N. Vladimirov; "New strategies of computational modelling in production and medical technology"; University of Liege, Faculty of Applied Sciences (Aerospatiale et Mecanique), Liege (Belgium), February 2011;
  • S. Reese, J. Frischkorn, Y. Kiliclar, M. Pietryga, M. Schwarze, I. N. Vladimirov; "Different aspects of the computational modelling of production processes - anisotropic plasticity and FE technology"; keynote lecture, International Symposium on Plasticity 2011, Puerto Vallarta (Mexico), January 2011;
  • S. Reese, M. Böl; "On the relation between polymer physics and finite element modelling - non-linear elasticity & inelasticity"; introductory lecture, Workshop "From polymer physics to rubber elasticity", Institut Henri Poincare, Paris (France), January 2011;
  • S. Reese, M. Schwarze, J. Frischkorn, I. N. Vladimirov; "Non-linear finite element technology - theory, discussion of stability and applications"; Seminar of the Aachen Institute for Advanced Study in Computational Engineering Science (AICES), Aachen (Germany), January 2011;
  • I. N. Vladimirov, M. Pietryga, Y. Kiliclar, V. Tini, S. Reese; "Constitutive modelling of anisotropy, hardening and failure of metallic materials – forming applications"; DSM Scientific Meeting "Mechanics of Materials", Vaals (The Netherlands), November 2010;
  • J. Frischkorn, M. Schwarze, D. Juhre, S. Reese; "Finite element technology for NiTi and shape memory polymer stents"; DSM Scientific Meeting "Mechanics of Materials", Vaals (The Netherlands), November 2010;
  • S. Reese, I. Vladimirov, J. Frischkorn, R. Kebriaei, Y. Kiliclar, M. Pietryga, A. Radermacher, B. Stier, V. Tini; "Introduction of the institute - computational modelling in production technology, polymer mechanics and medical technology"; DSM Scientific Meeting "Mechanics of Materials", Vaals (The Netherlands), November 2010;
  • I. N. Vladimirov, S. Reese; "On the constitutive modelling of anisotropic elastoplastic materials – prediction of earings in sheet forming"; 7th German-Greek-Polish Symposium on Recent Advances in Mechanics, Poznan (Poland), September 2010;
  • S. Reese, M. Pietryga, I. Vladimirov, M. Schwarze, J. Frischkorn; "Anisotropic finite plasticity in production technology - experimental validation and finite element modelling"; Seminar of Mathematical Material Sciences, Centre for Technomathematics, University of Bremen, Bremen (Germany), June 2010;
  • S. Reese, J. Frischkorn, Y. Kiliclar, M. Pietryga, A. Radermacher, M. Schwarze, V. Tini, I. Vladimirov; "Challenges of computational modelling in production and medical technology"; Seminar of the Department of Ferrous Metallurgy, RWTH University Aachen, Aachen (Germany), June 2010;
  • S. Reese, J. Frischkorn, Y. Kiliclar, M. Pietryga, A. Radermacher, M. Schwarze, V. Tini, I. Vladimirov; "Challenges of computational modelling in production and medical technology"; plenary lecture, 4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010;
  • I. N. Vladimirov, M. Schwarze, S. Reese; "A finite strain anisotropic plasticity formulation for metal forming processes"; keynote lecture, 4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010;
  • M. P. Pietryga, I. N. Vladimirov, S. Reese; "Continuum mechanical material modelling of anisotropy with application to sheet metal forming"; 4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010;
  • J. Frischkorn, S. Reese; "Modelling the compaction of metal powder and its application towards FE simulations of a new coating process"; 4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010;
  • S. Reese, M. Schwarze, I. N. Vladimirov; "A new continuum shell finite element for sheet metal forming applications"; The 13th International ESAFORM Conference on Material Forming, Brescia (Italy), April 2010;
  • I. N. Vladimirov, M. Schwarze, M. P. Pietryga, J. Frischkorn, S. Reese; "A large deformation multiplicative framework for anisotropic elastoplastic materials with application to sheet forming"; The 13th International ESAFORM Conference on Material Forming, Brescia (Italy), April 2010;
  • S. Reese, J. Frischkorn, M. Pietryga, M. Schwarze, I. N. Vladimirov; "New aspects in the computational modelling of production processes"; NAFEMS Awareness Seminar "Finite Elements and Numerical Simulation in Forming Processes", Aveiro (Portugal), April 2010;
  • S. Reese, M. Schwarze, I. N. Vladimirov; "A new solid-shell finite element technology for sheet metal applications"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010;
  • I. N. Vladimirov, M. Schwarze, S. Reese; "Anisotropic multiplicative elastoplasticity for the prediction of springback and earings in sheet metal forming"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010;
  • V. Tini, S. Reese; "A viscoplastic-damage model for the lifetime prediction of regeneratively cooled nozzle structures"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010;
  • Y. Kiliclar, I. Vladimirov, M. Schwarze, S. Reese; "Constitutive modelling and finite element technology for different forming processes"; 2nd German-Japanese Workshop on Computational Mechanics, Yokohama (Japan), March 2010;
  • S. Reese, J. Frischkorn, M. Pietryga, M. Schwarze, I. N. Vladimirov; "New contributions in mechanics to material and process modelling"; SimPRO Meeting, Aachen (Germany), January 2010;
  • S. Reese, C. Bertsch, J. Frischkorn, M. Pietryga, M. Schwarze, I. Vladimirov; "New aspects in the modelling of production processes"; plenary lecture, GACM Colloquium, Hannover (Germany); September 2009;
  • M. Böl, S. Reese; "A direction dependent approach to the modeling of shape memory polymers"; 6th European Conference on Constitutive Models for Rubber, Dresden (Germany); September 2009;
  • V. Tini, S. Reese; "A viscoplastic material model for the lifetime prediction of regeneratively cooled nozzle structures"; GACM Colloquium, Hannover (Germany); September 2009;
  • J. Frischkorn, S. Reese; "FE simulation of coating ring-shaped work pieces with particle reinforced MMC layers"; 1st International Conference on Material Modelling (poster presentation), Dortmund (Germany); September 2009;
  • J. Frischkorn, S. Reese; "Modelling the powder metallurgical production of MMC coatings"; 10th International Conference on Computational Plasticity, Barcelona (Spain); September 2009;
  • M. P. Pietryga, I. N. Vladimirov, S. Reese; "Continuum mechanical material modelling of elastic and plastic anisotropy with application to sheet metal forming"; 10th International Conference on Computational Plasticity, Barcelona (Spain); September 2009;
  • C. Bertsch, M. Schwarze, S. Reese; "Numerical aspects in the simulation of robot based incremental sheet metal forming"; 10th International Conference on Computational Plasticity, Barcelona (Spain); September 2009;
  • M. P. Pietryga, I. N. Vladimirov, S. Reese; "Continuum mechanical material modelling of elastic and plastic anisotropy with application to sheet metal forming"; 1st International Conference on Material Modelling (poster presentation), Dortmund (Germany); September 2009;
  • S. Reese, D. Christ, M. Böl, J. Frischkorn; "Finite element simulation of coated stents"; Collquium des SFB 499, University of Hannover, Hannover (Germany); June 2009;
  • J. Frischkorn, S. Reese; "Herstellung pulvermetallurgischer Funktionsschichten im Ringwalzprozess - Modellierung und Simulation"; 2. Forum Metallplastizität / AK Stoffgesetze, Karlsruhe (Germany); May 2009;
  • M. P. Pietryga, I. N. Vladimirov, S. Reese; "Elastische und plastische Anisotropie - Kontinuumsmechanische Modellierung und numerische Umsetzung"; 2. Forum Metallplastizität / AK Stoffgesetze, Karlsruhe (Germany); May 2009;
  • M. Schwarze, I. N. Vladimirov, S. Reese; "On the implementation of the EAS and ANS concept into a reduced integration continuum shell element and applications to sheet forming"; The 12th International ESAFORM Conference on Material Forming, Enschede (The Netherlands); April 2009;
  • S. Reese, M. P. Pietryga, I. N. Vladimirov; "Anisotropic finite plasticity based on structural tensors - different strategies and application to forming simulations"; The 12th International ESAFORM Conference on Material Forming, Enschede (The Netherlands); April 2009;
  • S. Reese, D. Christ, M. Böl; "Stent implants - modelling and further ideas"; 4th Polish-German Winter Colloquium, La Clusaz (France); March 2009;
  • M. Böl, S. Reese; "Finite Element Approaches for the Modelling of Shape Memory Polymers"; Zentrum für Biomaterialentwicklung, Institut für Polymerforschung, GKSS-Forschungszentrum Geesthacht GmbH, Teltow (Germany); March 2009;
  • S. Reese, C. Bertsch, M. Böl, D. Christ, J. Frischkorn, M. Schwarze, V. Tini, I. Vladimirov; "Innovative Applications of Mechanics in Technical Sciences"; Eidgenössische Technische Hochschule Zürich (Switzerland); March 2009;
  • C. Bertsch, M. Schwarze, S. Reese; "Numerische Aspekte bei der Finite-Elemente-Modellierung von Blechumformprozessen"; Workshop Impulsumformung, Dortmund (Germany); March 2009;
  • A. S. Obaid, S. Reese; "Coupling of Substructures Based on Data Base"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland); February 2009;
  • S. Reese, M. Schwarze; "A new large deformation solid-shell formulation incorporating the ANS concept"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland); February 2009;
  • V. Tini, S. Reese; "A material model for the lifetime prediction of regeneratively cooled noozle structures"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland); February 2009;
  • C. Bertsch, R. Laurischkat, S. Reese, H. Meier; "A coupled process-structure-model to simulate robot based incremental sheet metal forming"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland); February 2009;
  • H. Meier, S. Reese, C. Bertsch, R. Laurischkat; "Erhöhung der Maßhaltigkeit von Blechbauteilen durch eine modellgestützte Bahnplanung für die roboterbasierte Blechumformung"; Antragskolloquium des DFG-Schwerpunktprogramms 1180 "Prognose und Beeinflussung der Wechselwirkungen von Strukturen und Prozessen", Bonn (Germany); January 2009;
  • S. Reese, M. Böl; "Kaputtes Herz, zuckender Muskel - heilen mit dem Computer?"; Vortrag im Rahmen des Studium generale 2008 der Technischen Universität Braunschweig, Braunschweig (Germany); October 2008;
  • S. Reese, M. Böl, D. Christ; "On the modelling of smart materials in medical technology"; 18th International Symposium on Computational Mechanics of Materials, Beiing (China); October 2008;
  • C. Bertsch, R. Laurischkat, H. Meier, S. Reese; "Increase of the Dimensional Accuracy of Sheet Metal Parts utilizing a Model-Based Path Design for Robote-Based Forming Processes"; 1st International Conference on Process-Machine-Interactions, Hannover (Germany); September 2008;
  • S. Reese, C. Bertsch, M. Böl, D. Christ, J. Frischkorn, C. Rickelt, M. Schwarze, I. Vladimirov; "Innovative Anwendungen der Mechanik im Ingenieurwesen"; Fakultät für Bauingenieurwesen, RWTH Aachen, Aachen (Germany); September 2008;
  • S. Reese, M. Böl; "Finite element-based multiscale modelling of phase interactions in filler reinforced elastomers"; Euromech Colloquium 502 on Reinforced Elastomers, Dresden (Germany); September 2008;
  • S. Reese, I. N. Vladimirov, M. Schwarze, M. Pietryga; "Anisotropic Modelling and Finite Element Technology for the Simulation of Forming Processes"; Otto-von-Guericke University Magdeburg, Magdeburg (Germany); August 2008;
  • M. Stelzer, O. v. Stryk, E. Abele, J. Bauer, C. Bertsch, S. Reese, R. Laurischkat, H. Meier; "Comparison of implementations of a flexible joint multibody dynamics system for an industrial robot"; 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, Naples (Italy); July 2008;
  • M. Böl, S. Reese, K. K. Parker, E. Kuhl; "Three-Dimensional Muscle Modelling"; 8th World Conference on Computational Mechanics, Venice (Italy); July 2008;
  • S. Reese, I. N. Vladimirov, M. P. Pietryga; "Anisotropic finite plasticity with evolving structural tensors"; 2nd Workshop on Multiscale Material Modelling, Stuttgart (Germany); July 2008;
  • S. Reese, G. Silber, D. Christ, M. Böl; "Stent implants - modelling and numerical issues"; 8th World Conference on Computational Mechanics, Venice (Italy); July 2008;
  • S. Reese, M. Schwarze, D. Christ, I. N. Vladimirov; "New aspects in material modelling and finite element technology for forming simulations"; 8th World Conference on Computational Mechanics, Venice (Italy); July 2008;
  • J. Frischkorn, S. Reese; "Finite Element Modelling of Process Integrated Powder Coating"; 8th World Conference on Computational Mechanics, Venice (Italy); July 2008;
  • M. Böl, S. Reese; "Micromechanical modelling of shape memory polymers"; 3rd International Conference Smart Materials, Structures & Systems, Sicily (Italy); June 2008;
  • I. N. Vladimirov, S. Reese; "Anisotropic finite plasticity with combined hardening and application to sheet metal forming"; 11th ESAFORM Conference on Material Forming, Lyon (France); April 2008;
  • A. Abeed, S. Reese; "Multi-time step domain decomposition methods"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
  • C. Bertsch, A. Cisilino, S. Langer, S. Reese; "Optimierung der Topologien elastischer Körper in 3D mittels der Randelementemethode"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
  • M. Böl, A. Pipetz, S. Reese; "Modelling of skeletal muscle activation, fatigue and recovery"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
  • J. Unger, M. Stiemer, B. Svendsen, H. Blum, M. Schwarze, S. Reese; "Modeling and simulation of 3D EMF processes with failure limit prediction"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
  • J. Frischkorn, S. Reese; "Simulation of powder metallurgical coating by longitudinal and ring rolling"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
  • M. Schwarze, C. Rickelt, S. Reese; "Towards the contact and impact modelling in finite element simulations of high speed forming"; 3rd International Conference on High Speed Forming, Dortmund (Germany); March 2008;
  • M. Böl, S. Reese; "Micro-Macro Modelling: From Sarcomere to Muscles Contraction"; Simbios Seminar, Stanford University, Stanford (USA); March 2008;
  • S. Reese, I. N. Vladimirov, M. Schwarze; "Anisotropic behaviour of metallic materials - continuum mechanical modelling and FE technology"; Seminar of the Institute for Materials Research, GKSS Research Centre, Geesthacht (Germany); March 2008;
  • J. Unger, M. Stiemer, M. Schwarze, B. Svendsen, H. Blum, S. Reese; "Modeling and simulation of 3D EMF processes"; 3rd International Conference on High Speed Forming, Dortmund (Germany); March 2008;
  • M. Böl, A. Pipetz, S. Reese; "Modelling of skeletal muscle activation, fatigue and recovery"; 10th International Symposium on Biomaterials: Fundamentals and Clinical Applications, Essen (Germany); March 2008;
  • S. Reese, M. Böl, D. Christ; "Mehrskalenprobleme in der Biomechanik und Medizintechnik - Stentimplantate"; 121. Norddeutsches Mechanik-Kolloquium, Braunschweig (Germany); February 2008;
  • R. Laurischkat, C. Bertsch, H. Meier, S. Reese; "Erhöhung der Maßhaltigkeit von Blechbauteilen durch eine modellgestützte Bahnplanung für die roboterbasierte Blechumformung – Modellbildung und Parameteridentifikation der werkzeugführenden Roboterstruktur"; SPP1180 Workshop "Parameteridentifikation bei Werkzeugmaschinen" , Berlin (Germany); February 2008;
  • S. Reese, I. N. Vladimirov, M. Schwarze; "Anisotropy of metals in forming processes - material modelling and finite element technology"; IUTAM Symposium on Theoretical, Modelling and Computational Aspects of Inelastic Media, Capetown (South Africa); January 2008;
  • A. S. Kompalka, O. T. Bruhns, S. Reese; "Damage quantification in beamlike structures using finite element model updating"; 3rd International Conference on Lifetime-oriented Design Concepts, Bochum (Germany); November 2007;
  • C. Rickelt, S. Reese; "An efficient strategy for life time investigations of partially damaged structures"; 3rd International Conference on Lifetime-oriented Design Concepts, Bochum (Germany); November 2007;
  • M. Pietryga, S. Reese; "Comparison of two integration algorithms for finite viscoplasticity combined with nonlinear kinematic and isotropic hardening"; 2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, München (Germany); October 2007;
  • I. N. Vladimirov, S. Reese; "On the use of a finite anisotropic combined hardening model incorporating structural tensors in springback simulations"; 2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, München (Germany); October 2007;
  • D. Christ, S. Reese; "Thermomechanical modelling of shape memory alloys in the framework of large deformations"; 2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, München (Germany); October 2007;
  • A. Pipetz, M. Böl, S. Reese; "Simulation of the physiological behaviour of skeletal muscles"; 2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, München (Germany); October 2007;
  • M. Böl, S. Reese; "On a dynamical modelling of skeletal muscle fatigue and recovery by means of the finite element method"; 2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, München (Germany); October 2007;
  • D. Christ, S. Reese; "FE modelling of SMA considering thermomechanical couplings and finite deformations"; E-MRS Fall Meeting, Warsaw (Poland); September 2007;
  • D. Christ, S. Reese; "FE modelling of SMA considering thermomechanical couplings and finite deformations"; E-MRS Fall Meeting, Warsaw (Poland); September 2007;
  • M. Böl, S. Reese; "Computer simulations of temperature induced shape memory polymers by means of the finite element method"; 5th European Conference on Constitutive Models for Rubber, Paris (France); September 2007;
  • M. Böl, S. Reese; "Micromechanical modelling and computational testing of skeletal muscles"; 9th International Conference on Computational Plasticity, Barcelona (Spain); September 2007;
  • S. Reese, M. Schwarze; "Adaptive hourglass stabilization in forming simulations by means of reduced integration"; 10th International Conference on Computational Plasticity, Barcelona (Spain); September 2007;
  • R. Laurischkat, M. Pietryga, H. Meier, S. Reese; "Erhöhung der Maßhaltigkeit von Blechbauteilen durch eine modellgestützte Bahnplanung für die roboterbasierte Blechumformung"; 2. Internes Kolloquium des DFG-Schwerpunktprogramms 1180: Prognose und Beeinflussung der Wechselwirkungen von Strukturen und Prozessen, Garbsen (Germany); September 2007;
  • I. N. Vladimirov, S. Reese; "Springback prediction by means of a combined nonlinear isotropic/kinematic hardening material model"; 9th International Symposium on Plasticity and Impact Mechanics (IMPLAST), Bochum (Germany); August 2007;
  • J. Frischkorn, S. Reese; "A finite deformation model to describe compaction and sintering effects in metal powders"; 9th International Symposium on Plasticity and Impact Mechanics (IMPLAST), Bochum (Germany); August 2007;
  • M. Böl, D. Christ, S. Reese; "Coupled problems in biomechanics and medical technology"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland); July 2007;
  • M. Böl, S. Reese; "A new method for the simulation of shape memory polymers"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland); July 2007;
  • M. Schwarze, S. Reese; "Solid-shell finite element technology - adaptive hourglass stabilization and further improvements"; 9th US National Congress on Computational Mechanics, San Francisco (USA); July 2007;
  • S. Reese, D. Christ; "FE modelling of shape memory alloys considering thermomechanical couplings and large deformation"; 9th US National Congress on Computational Mechanics, San Francisco (USA); July 2007;
  • M. Pietryga, I. N. Vladimirov, S. Reese; "Comparison of two integration algorithms for finite plasticity combined with nonlinear kinematic and isotropic hardening at the example of springback"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland); July 2007;
  • J. Frischkorn, S. Reese; "Simulating solid state sintering and compaction of metal powder in the finite strain regime"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland); July 2007;
  • M. Schwarze, S. Reese; "The use of an hourglass stabilized solid-shell finite element in forming simulations - theoretical aspects and first industrial applications"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland); July 2007;
  • D. Christ, S. Reese; "FE modelling of shape memory alloys in the framework of large strains"; 13th International Symposium on Plasticity, Girdwood (USA); June 2007;
  • S. Reese, M. Böl; "Mikro-Makro-Modellierung von gummiartigen Polymeren mit finiten Elementen"; Fortbildungsseminar des Deutschen Institutes für Kautschuktechnologie e.V., Hannover (Germany); June 2007;
  • D. Christ, S. Reese; "Phänomenologische Modellierung von NiTi unter Berücksichtigung der Zug-Druck Asymmetrie"; SFB-Seminar, Bochum (Germany); June 2007;
  • S. Reese, I. N. Vladimirov, M. Schwarze; "A new solid-shell finite element technology incorporating plastic anisotropy in forming simulations"; 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto (Portugal); June 2007;
  • M. Böl, S. Reese; "On a mesomechanical modelling of skeletal muscles"; Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering, Prague (Czech Republic); June 2007;
  • C. Rickelt, S. Reese; "Efficient life time investigations of partially damaged structures applying dynamic substructuring and model reduction"; COMPDYN 2007 Computational Methods in Structural Dynamics and Earthquake Engineering, Rethymno (Greece); June 2007;
  • M. Schwarze, S. Reese; "Finite element technology in forming simulations - theoretical aspects and practical applications of a new solid-shell element"; 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto (Portugal); June 2007;
  • S. Reese, D. Christ; "FE modelling of shape memory alloys in the framework of large strains"; First Seminar on the Mechanics of Multifunctional Materials, Bad Honnef (Germany); May 2007;
  • M. Böl, S. Reese; "Computational testing of shape memory polymer networks"; First Seminar on the Mechanics of Multifunctional Materials, Bad Honnef (Germany); May 2007;
  • M. Böl, S. Reese, D. Christ; "Shape memory polymers - modelling and simulation"; AK Stoffgesetze, Paderborn (Germany); April 2007;
  • I. N. Vladimirov, S. Reese; "A phenomenological model for springback prediction of sheet metals"; AK Stoffgesetze, Paderborn (Germany); April 2007;
  • M. Pietryga, S. Reese; "Integration mit Rückwärts-Euler-Verfahren vs. Exponential Map in der finiten Plastizität"; AK Stoffgesetze, Paderborn (Germany); April 2007;
  • I. N. Vladimirov, S. Reese; "A finite strain isotropic/kinematic hardening model for springback simulation of sheet metals"; keynote lecture, 10th ESAFORM Conference on Material Forming, Zaragoza (Spain); April 2007;
  • M. Schwarze, S. Reese; "Element technology in the field of sheet metal forming simulations: aspects of theory and applications"; Continuum Mechanics Workshop, Braunlage (Germany); March 2007;
  • M. Pietryga, S. Reese; "Two Integration Algorithms: Backward Euler vs. Exponential Map, Motivation, Implementation into a FE regime, Comparison"; Continuum Mechanics Workshop, Braunlage (Germany); March 2007;
  • J. Frischkorn, S. Reese; "A material model for process-integrated powder coating through radial axial rolling of rings"; Continuum Mechanics Workshop, Braunlage (Germany); March 2007;
  • I. N. Vladimirov, S. Reese; "Springback simulation using a nonlinear kinematic/isotropic hardening model for large deformations"; Continuum Mechanics Workshop, Braunlage (Germany); March 2007;
  • J. Unger, M. Schwarze, M. Stiemer, B. Svendsen, S. Reese, H. Blum; "Magneto-mechanische gekoppelte Finite-Elemente-Modelle zur 3D-Simulation von EMB-Prozessen"; Workshop Elektromagnetische Umformung, Dortmund (Germany); March 2007;
  • S. Reese; "Innovative Anwendungen in der Festkörpermechanik - Theorie und Berechnung"; Antrittsvorlesung an der Technischen Universität Braunschweig, Braunschweig (Germany); November 2006;
  • M. Böl, S. Reese; "Micromechanical modelling of skeletal muscles: From the single fibre to the whole muscle"; 2nd GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany); November 2006;
  • S. Reese, M. Böl; "Skeletal muscles: micromechanical modelling and computational testing"; International Symposium on Biomaterials 2006, Annual Meeting of the German Society of Biomaterials e. V. (DGBM), Essen (Germany); September 2006;
  • S. Reese, D. Christ, M. Böl; "Simulation of shape memory polymers by means of the finite element method"; 7th European Symposium on Martensitic Transformations and Shape Memory Alloys, Bochum (Germany); September 2006;
  • D. Christ, S. Reese; "FE modelling of shape memory alloys - a comparison between small strain and large strain formulation"; 7th European Symposium on Martensitic Transformations and Shape Memory Alloys, Bochum (Germany); September 2006;
  • S. Reese, M. Böl, D. Christ, M. Schwarze; "Innovative materials - theory and computation"; plenary lecture, 6th European Solid Mechanics Conference, Budapest (Hungary); August 2006;
  • I. N. Vladimirov, S. Reese; "Material modelling and springback simulation in the finite strain regime"; 7th World Congress on Computational Mechanics, Los Angeles (USA); July 2006;
  • M. Böl, S. Reese; "Finite element simulations of skeletal muscle behaviour under tetanic and non-tetanic conditions"; 5th World Congress of Biomechanics, Munich (Germany); July 2006;
  • I. N. Vladimirov, S. Reese; "Constitutive modelling of sheet metals in the finite strain regime"; International Deep Drawing Research Group Conference, Porto (Portugal); June 2006;
  • M. Böl, S. Reese; "A new approach for the simulation of damage effects in rubber-like materials using chain"; 3rd European Conference on Computational Mechanics, Lisbon (Portugal); June 2006;
  • M. Böl, S. Reese; "Numerical simulations of rubber-like materials under changing directions"; 3rd European Conference on Computational Mechanics, Lisbon (Portugal); June 2006;
  • C. Rickelt, S. Reese; "A simulation strategy for life time calculations of large, partially damaged structures"; 3rd European Conference on Computational Mechanics, Lisbon (Portugal); June 2006;
  • M. Schwarze, S. Reese; "Analysis of forming processes with efficient finite element procedures"; 3rd European Conference on Computational Mechanics, Lisbon (Portugal); June 2006;
  • S. Reese, I. N. Vladimirov; "Springback simulation by means of a stabilized solid-shell finite element technology"; 9th International Esaform Conference on Material Forming, Glasgow (UK); April 2006;
  • M. Schwarze, S. Reese; "Efficient finite element procedures for the simulation of sheet metal forming processes"; 9th International Esaform Conference on Material Forming, Glasgow (UK); April 2006;
  • S. Reese; "Sheet metal forming - new developments in material modelling and finite element technology"; 3rd Polish-German Winter Colloquium, La Clusaz (France); March 2006;
  • S. Reese, M. Schwarze, I. N. Vladimirov; "Force calculation using a new thick shell formulation"; 9th Workshop on Simulation in Forming Technology, Stuttgart (Germany); March 2006;
  • D. Christ, S. Reese; "Material modelling of shape memory alloys in range of large deformations"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin (Germany); March 2006;
  • M. Böl, D. Christ, S. Reese; "Simulation of shape memory polymers by means of the finite element method"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin (Germany); March 2006;
  • C. Rickelt, S. Reese; "An efficient strategy to lifetime calculations of large structures"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin (Germany); March 2006;
  • I. N. Vladimirov, S. Reese; "Modelling the springback of sheet metals at large deformations"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin (Germany); March 2006;
  • M. Schwarze, A. Brosius, S. Reese, M. Kleiner; "Efficient finite element and contact procedures for the simulation of high speed sheet metal forming processes"; 2nd International Conference on High Speed Forming, Dortmund (Germany); March 2006;
  • D. Christ, S. Reese; "Is it necessary to model shape memory alloys within the scope of large strains?"; SPIE 13th Annual Symposium of Smart Structures and Materials, San Diego (USA); February 2006;
  • S. Reese, M. Böl; "of new materials in medical technology and biomechanics"; Workshop on "Mechanics of Materials", Oberwolfach (Germany); January 2006;
  • C. Rickelt, S. Reese; "An efficient strategy for the calculation of large damaged structures by means of partial model reduction"; 1st GACM Colloquium for Young Scientists on Computational Mechanics, Bochum (Germany); October 2005;
  • M. Schwarze, S. Reese; "Aspects of the numerical simulation of forming processes by using an innovative finite element technology"; 1st GACM Colloquium for Young Scientists on Computational Mechanics, Bochum (Germany); October 2005;
  • D. Christ, S. Reese; "FE simulation of shape memory alloys considering fatigue behaviour under cyclic loading"; 1st GACM Colloquium for Young Scientists on Computational Mechanics, Bochum (Germany); October 2005;
  • D. Christ, S. Reese; "Modelling of shape memory alloys in the finite deformation range considering fatigue under cyclic loading"; 7th International Conference on Computational Plasticity - Fundamentals and Applications, Barcelona (Spain); September 2005;
  • S. Reese; "simulation by finite elements: theory and applications"; Engineering Summer University Bremen, Bremen (Germany); September 2005;
  • M. Böl, S. Reese; "Modelling of the active and passive muscle behaviour by means of the finite element method"; 8th Symposium on Biomaterials and Biomechanics: Fundamental and Clinical Applications of the Working Group on "Biomaterials and Tissue Compatibility", Essen (Germany); September 2005;
  • C. Rickelt, S. Reese; "A simulation strategy for large, partially damaged structures using substructuring and model reduction"; Modellbildung, Identifikation und Simulation in der Automatisierungstechnik (GMA-Fachausschuss 1.30), Bostalsee (Germany); September 2005;
  • S. Reese, M. Schwarze, B. Svendsen; "Forming simulation - material modelling and finite element technology"; 7th International Conference on Computational Plasticity - Fundamentals and Applications, Barcelona (Spain); September 2005;
  • S. Reese, B. Svendsen, M. Böl; "On a structured mixture model for muscle activation due to calcium diffusion"; 8th US National Congress on Computational Mechanics, Austin (USA); July 2005;
  • S. Reese, M. Schwarze, B. Svendsen, J. Unger; "Efficient simulation of electromagnetical forming by means of a stabilized shell finite element technology"; 8th US National Congress on Computational Mechanics, Austin (USA); July 2005;
  • A. S. Kompalka, S. Reese; "Finite Element Model Updating for Damage Localisation and Quantification Using Experimental Modal Data"; 6th International Conference on Damage Assessment of Structures, Gdansk (Poland); July 2005;
  • S. Reese, D. Christ; "A new finite deformation model for shape memory alloys - theory and numerical implementation"; AK Stoffgesetze, Dortmund (Germany); June 2005;
  • S. Reese, M. Böl; "Computational testing and modelling of rubber-like polymers using chain statistics"; plenary lecture, 4th European Conference on Constitutive Models for Rubber (ECCMR), Stockholm (Schweden); June 2005;
  • S. Reese, M. Schwarze, M. Kleiner, K. Roll; "Efficient deep drawing simulations by means of an innovative shell finite element technology"; 5th International Conference on Computation of Shell and Spatial Structures, Salzburg (Austria); June 2005;
  • M. Böl, S. Reese; "Simulation of filled polymer networks with reference to the Mullins effect"; 4th European Conference on Constitutive Models for Rubber, Stockholm (Sweden); June 2005;
  • S. Reese, M. Böl, D. Christ, M. Schwarze; "Applications of shape memory alloys in medical technology and biomechanics"; Eidgenössische Technische Hochschule Zürich, Institut für Mechanische Systeme, Zürich (Switzerland); April 2005;
  • M. Schwarze, J. Unger, M. Stiemer, S. Reese, B. Svendsen, H. Blum; "Numerische Aspekte bei der Simulation elektromagnetischer Blechumformung - Elementtechnologie und Materialmodellierung"; Workshop "Elekromagnetische Blechumformung", Dortmund (Germany); April 2005;
  • S. Reese, M. Böl; "New Developments in the Theoretical and Numerical Modelling of Elastomers"; MATELCOMP Polymer Competence Centre Leoben, Leoben (Austria); April 2005;
  • S. Reese, A. S. Kompalka, C. Rickelt; "System theoretical and model-adaptive strategies for the life time estimation of damaged structures"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg; March 2005;
  • S. Reese, M. Böl, R. Blickhan, P. Meier; "Muscle modelling by means of polymer networks"; Workshop on porous media, biomechanics and related fields, Freudenstadt (Germany); March 2005;
  • C. Rickelt, S. Reese; "A model-adaptive coupling strategy of non-linear and model-reduced linear subsystems"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg; March 2005;
  • M. Böl, S. Reese; "Computer simulations for the mechanical analysis of skeletal muscles"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg; March 2005;
  • M. Schwarze, S. Reese; "Simulation of forming processes by using a new large deformation solid-shell concept"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg; March 2005;
  • I. N. Vladimirov, S. Reese, G. Eggeler; "Creep of single crystals - modelling and numerical aspects"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg; March 2005;
  • M. Pietryga, D. Christ, S. Reese; "Implementation of thermomechanical coupling for shape memory alloys into the finite element method"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg; March 2005;
  • D. Christ, S. Reese; "Numerical simulation of the application of NiTi alloys in medical technologies"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg; March 2005;
  • S. Reese, D. Christ, K. Neuking; "Shape memory alloy structures - theory and numerical modelling"; Rheinisch-Westfälische Technische Hochschule Aachen, Department of Mechanical Engineering; January 2005;
  • S. Reese, M. Böl, P. Meier, R. Blickhan; "Skeletal muscle modeling by means of an innovative finite element technology"; 1st GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany); November 2004;
  • S. Reese, D. Christ, K. Neuking; "Non-linear finite element modelling of SMA structures"; 2nd European Conference on Shape Memory and Superelastic Technology, Baden-Baden (Germany); October 2004;
  • S. Reese, M. Böl, D. Christ; "Modellierung und Computersimulation von Stents und Muskelfasern"; University of Hannover, Department of Mechanical Engineering, Hannover (Germany); October 2004;
  • M. Böl, S. Reese; "Computer simulation of particle filled polymer networks based on chain statistics with reference to stress-softening effects"; Filler Reinforcement of Rubber including all Aspects of Fillers and Filler-Rubber Interactions, London (UK); September 2004;
  • S. Reese, B. Svendsen, M. Schwarze, J. Unger; "On the FE modelling of electro-magnetic metal forming processes"; German-Greek-Polish Mechanics Symposium, Bad Honnef (Germany); September 2004;
  • S. Reese, D. Christ; "Shape memory alloy composites - modelling of the one-way effect and the fatigue behaviour"; International Conference on Computation & Experimental Engineering and Sciences, Madeira (Portugal); July 2004;
  • S. Reese, A. S. Kompalka, C. Rickelt; "Lebensdaueranalysen mit Hilfe von modelladaptiven und systemtheoretischen Methoden"; VDI-Arbeitskreis Mess- und Automatisierungstechnik, Kolloquium für Mechanik und Regelungstechnik der Universität Siegen, Siegen (Germany); July 2004;
  • M. Böl, S. Reese; "Simulation of particle filled polymer networks based on chain statistics"; Euromech Colloquium 459: Mechanical behaviour of cellular solids, Nancy (France); June 2004;
  • C. Rickelt, S. Reese; "A model adaptive and model reduction strategy combining system-theoretical methods and substructuring"; 10th International Conference on Computing in Civil and Building Engineering (ICCCBE), Weimar (Germany); June 2004;
  • I. N. Vladimirov, S. Reese; "Modellierung des Kriechens von einkristallinen Superlegierungen mit Hilfe von einer innovativen Finiten-Element-Technologie"; AK Stoffgesetze, Bremen (Germany); June 2004;
  • S. Reese, M. Böl; "Meso-macro modelling or rubber-like polymer networks based on chain statistics"; Université Pierre et Marie Curie, Paris (France); May 2004;
  • S. Reese, C. Leppin; "A new finite element technology for the numerical simulation of high speed forming processes"; 1st International Colloquium on High-Speed Forming, Dortmund (Germany); April 2004;
  • S. Reese; "Finite-Elemente-Analysen von dünnen Strukturen im Maschinenbau und in der Medizintechnik"; Technische Universität Berlin, Fakultät für Verkehrs- und Maschinensysteme, Berlin (Germany); March 2004;
  • S. Reese, D. Christ; "Modelling and simulation of NiTi stents"; Workshop on Porous Media, Biomechanics and Related Fields, Freudenstadt (Germany); March 2004;
  • M. Böl, S. Reese; "Simulation of particle filled polymer networks based on chain statistics under consideration of the Mullins' effect"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Dresden (Germany); March 2004;
  • C. Rickelt, M. Schwarze, S. Reese; "A 3-level discretisation strategy using substructuring"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Dresden (Germany); March 2004;
  • D. Christ, S. Reese; "FE modelling of NiTi-composed structures"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Dresden (Germany); March 2004;
  • S. Reese; "On a new ALE method for lamination and extrusion problems"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Dresden (Germany); March 2004;
  • M. Böl, S. Reese; "Finite element modelling of filled and unfilled polymer networks based on chain statistics"; Workshop on Continuum Mechanical Modelling and Numerical Methods, Sterzing (Italy); March 2004;
  • C. Rickelt, M. Schwarze, S. Reese; "A model adaptive and system theoretical discretisation strategy for damage oriented FE simulations"; Workshop on Continuum Mechanical Modelling and Numerical Methods; March 2004;
  • D. Christ, S. Reese; "Numerical simulation of pseudoelasticity and the shape memory effect in NiTi-based alloys"; Workshop on Continuum Mechanical Modelling and Numerical Methods, Sterzing (Italy); March 2004;
  • C. Rickelt, M. Schwarze, S. Reese; "A new simulation strategy by means of model adaptivity and system theory"; 2nd International Conference on Lifetime Oriented Design Concepts, Bochum (Germany); March 2004;
  • S. Reese, A. S. Kompalka, C. Rickelt; "On damage localisation by means of vibration measurements: identification and model updating - A simulation strategy for life time estimation based on model reduction"; Polish-German Winter Colloquium, La Clusaz (France); March 2004;
  • S. Reese; "Vorstellungen in der Lehre und Forschung auf dem Gebiet der nichtlinearen Festkörpermechanik"; Technical University of Dresden, Department of Mechanical Engineering, Dresden (Germany); February 2004;
  • M. Böl, S. Reese; "Simulation of filled and unfilled polymer networks by means of the finite element method"; 5th Humboldt-Seminar, Halle (Germany); November 2003;
  • D. Christ, S. Reese, K. Neuking; "Anwendung von Formgedächtnislegierungen in hybriden Kopplungs- und Entkopplungsmechanismen"; 3. Bochumer Kolloquium über Martensitische Transformation, Bochum (Germany); October 2003;
  • S. Reese, D. Christ, K. Neuking; "Finite element modelling of intelligent structures - cyclic behaviour and the shape memory effect"; Micro-Symposium, Universität Duisburg-Essen, Institut für Mechatronik und Systemdynamik, Duisburg (Germany); September 2003;
  • M. Böl, S. Reese; "Finite element modelling of polymer networks based on chain statistics"; 3th European Conference on Constitutive Models for Rubber, London (UK); September 2003;
  • I. N. Vladimirov; "Finite element modelling of sheet metal forming by means of an innovative element technology"; Workshop "Master Theses for Young Engineers", Budva, Serbia and Montenegro; September 2003;
  • S. Reese, D. Christ, K. Neuking; "Finite element modelling of intelligent structures - cyclic behaviour and the shape memory effect"; Civil & Computational Engineering Centre, University of Wales (UK); September 2003;
  • D. Christ, S. Reese; "Theoretical and numerical modelling of shape memory alloy composites"; 6th European Symposium on Martensitic Transformations, Cirencester (UK); August 2003;
  • S. Reese; "Theoretical and computational modelling of fabric-reinforced structures"; 5th European Solid Mechanics Conference, Thessaloniki (Greece); August 2003;
  • S. Reese; "Thermo-mechanical modelling of shape memory alloy composites"; Fifth European Solid Mechanics Conference, Thessaloniki (Greece); August 2003;
  • M. Böl, S. Reese; "Finite element simulation of rubber-like polymer networks under micro-mechanical aspects"; 5th European Solid Mechanics Conference, Thessaloniki (Greece); August 2003;
  • S. Reese, D. Christ, K. Neuking; "Finite element modelling of intelligent structures - cyclic behaviour and the shape memory effect"; 5th European Solid Mechanics Conference, Thessaloniki (Greece); August 2003;
  • S. Reese; "Thermomechanische Modellierung von Polymeren - von der Netzwerksimulation zum kontinuumsmechanischen Modell"; Universität des Saarlandes, Naturwissenschaftlich-Techische Fakultät III, Saarbrücken (Germany); July 2003;
  • S. Reese; "On a new reduced integration technology for thin structures in finite inelasticity"; Second MIT Conference on Computational Fluid and Solid Mechanics, Boston (USA); June 2003;
  • S. Reese; "Finite element modelling of intelligent structures - dynamical behaviour and the shape memory effect"; Second MIT Conference on Computational Fluid and Solid Mechanics, Boston (USA); June 2003;
  • S. Reese; "Finite-Elemente-Modellierung von intelligenten Strukturen - zyklisches Verhalten und der Formgedächtniseffekt"; Universität der Bundeswehr Hamburg, Fachbereich Maschinenbau, Hamburg (2003); June 2003;
  • S. Reese; "Thermomechanische Modellierung des zyklischen Verhaltens von Memory-Bauteilen"; Technische Universität Braunschweig, Fakultät für Maschinenwesen, Braunschweig (Germany); May 2003;
  • M. Böl, S. Reese; "Computer simulation of the inelastic behaviour of polymer networks"; 7th International Conference on Computational Plasticity, Barcelona (Spain); April 2003;
  • S. Reese; "Reduced integration techniques to solve 3D problems in finite inelasticity"; 7th International Conference on Computational Plasticity, Barcelona (Spain); April 2003;
  • M. Böl, S. Reese; "Finite element simulation of rubber-like material behaviour under consideration of its microscopic structure"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Padova (Italy); March 2003;
  • S. Reese; "A reduced integration element technology to treat large inelastic deformations in 3D structures"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Padova (Italy); March 2003;
  • S. Reese; "Numerische Simulationstechniken für Design und Herstellung von Polymer-Kompositen"; Fachausschuß der Gesellschaft für Angewandte Mathematik und Mechanik "Mehrfeldprobleme in der Festkörpermechanik", Universität Hannover, Hannover (Germany); January 2003;
  • S. Reese; "On the use of evolving structure tensors to model initial and induced elastic and inelastic anisotropy at finite deformation"; Euromech-Mecamat: 6th European Mechanics of Materials Conference, Liège (Belgium); September 2002;
  • S. Reese, M. Böl; "Computer simulation of polymer networks by means of finite elements"; Constitutive Equations for Polymer Microcomposites, Vienna (Austria); July 2002;
  • S. Reese; "Thermo-viscoelastic modelling of elastomers"; Workshop on Viscoelasticity of Rubber-like Solids: from Theory to Applications,Vienna (Austria); July 2002;
  • S. Reese; "Computational testing and material modelling of flexible polymer composites"; keynote lecture, 5th World Conference on Computational Mechanics, Vienna (Austria); July 2002;
  • S. Reese; "Modellierung und numerische Simulation von faserverstärkten Kompositstrukturen"; Fachbereich Mechanik, Technische Universität Darmstadt, Darmstadt (Germany); June 2002;
  • S. Reese; "Theoretische und numerische Modellierung faserverstärkter Polymer-Komposite"; Fakultät für Bauingenieur- und Vermessungswesen, Technische Universität München, München (Germany); May 2002;
  • S. Reese; "Modellbildung und numerische Simulation von adaptiven Verbundwerkstoffen"; Fakultät für Maschinenwesen, Technische Universität München, München (Germany); May 2002;
  • S. Reese; "Zur thermomechanischen Modellierung von Polymerbauteilen in industriellen Anwendungen"; Seminar des Deutschen Institutes für Kautschuktechnologie e. V.: Finite-Elemente-Anwendungen in der Kautschuktechnologie, Hannover (Germany); April 2002;
  • S. Reese; "A new finite element technology to treat large inelastic deformations in thermo-mechanically coupled problems"; Workshop on Continuum Mechanical Modelling and Numerical Methods, Hirschegg (Austria); February 2002;
  • S. Reese; "Modellierung und Simulation des Materialverhaltens faserverstärkter Composites"; Fachbereich Maschinenbau, Universität Gesamthochschule Kassel, Kassel (Germany); October 2001;
  • S. Reese; "On the modelling of internal variables as structure tensors in anisotropic, finite-deformation inelasticity"; Euromech-Colloquium 430: Formulations and Constitutive Laws for Very Large Strains, Prague (Czech Republic); October 2001;
  • S. Reese; "Anisotropic elastoplastic material behaviour in fabric structures"; IUTAM-Symposium: Computational Mechanics of Solid Materials at Large Strains, Stuttgart (Germany); August 2001;
  • S. Reese; "A new finite element technology to treat large inelastic deformations in thermo-mechanically coupled problems"; keynote lecture, 2nd European Conference on Computational Mechanics, Krakow (Poland); June 2001;
  • S. Reese; "Meso-macro modelling of fibre-reinforced composites exhibiting elastoplastic material behaviour"; 2nd European Conference on Computational Mechanics, Krakow (Poland); June 2001;
  • S. Reese; "A new approach to hourglass stabilization in large deformation problems"; International Conference "Trends in Computational Structural Mechanics", Schloß Hofen (Austria); May 2001;
  • S. Reese; "Anisotropic elastoplastic material behaviour in fabric structures"; Invitational conference on the occasion of the 60th birthday of Prof. K. Hutter, Darmstadt (Germany); March 2001;
  • S. Reese; "Theoretische und numerische Modellierung des thermomechanischen Materialverhaltens gummiartiger Polymere"; Tagung des Fachausschusses "Materialtheorie" der Gesellschaft für Angewandte Mathematik und Mechanik, Stuttgart (Germany); March 2001;
  • S. Reese; "Meso-macro modelling of fibre-reinforced composites exhibiting elastoplastic material behaviour"; Workshop on Computational Structural Dynamics, Skopje (Macedonia); February 2001;
  • S. Reese; "Modellierung und FE-Simulation pneumatischer faserverstärkter Membrankonstruktionen"; Fakultät für Luft- und Raumfahrttechnik, Universität Stuttgart, Stuttgart (Germany); February 2001;
  • S. Reese; "On the numerical modelling of kinematic hardening of the Armstrong-Frederick type in finite plasticity"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland); February 2001;
  • S. Reese; "Neuartige Elementformulierungen zur effizienten Berechnung stark deformierter Bauteile"; Fakultät für Maschinenwesen, Rheinisch-Westfälische Technische Hochschule Aachen, Aachen (Germany); January 2001;
  • S. Reese; "Zur Anwendung der FE-Methode bei nichtlinearen Problemstellungen, Institut für Technische Mechanik"; Fachbereich Ingenieurwissenschaften, Martin-Luther-Universität Halle-Wittenberg, Halle (Germany); December 2000;
  • S. Reese; "Modellierung und FE-Simulation pneumatischer faserverstärkter Membrankonstruktionen"; Fachbereich Ingenieurwissenschaften, Martin-Luther-Universität Halle-Wittenberg, Halle (Germany); December 2000;
  • S. Reese; "On the orthotropic elastoplastic material behaviour of pneumatic membranes"; Heraeus-Seminar, Bad Honnef (Germany); September 2000;
  • S. Reese; "Large deformation FE modeling of the orthotropic elastoplastic material behaviour in pneumatic membranes"; European Congress on Computational Methods in Applied Sciences and Engineering, Barcelona (Spain); September 2000;
  • S. Reese; "An efficient finite element algorithm to model fully-coupled problems in thermo-viscoelasticity"; International Symposium on Plasticity, Whistler (Canada); July 2000;
  • S. Reese; "Modellierung und FE-Simulation pneumatischer faserverstärkter Membrankonstruktionen"; Institut für Mechanik und Regelungstechnik, Fakultät für Maschinenbau, Universität Gesamthochschule Siegen, Siegen (Germany); June 2000;
  • S. Reese; "Zur Anwendung der FE-Methode bei nichtlinearen Problemstellungen"; Antrittsvorlesung zur Habilitation, Hannover (Germany); May 2000;
  • S. Reese; "Eine Stabilisierungstechnik zur Vermeidung von Hourglass-Instabilitäten in der finiten Elastizität"; Institut für Mechanik, Fachbereich Verkehrswesen und Angewandte Mechanik, Technische Universität Berlin, Berlin (Germany); February 2000;
  • S. Reese; "Neuartige Elementformulierungen zur effizienten FE-Untersuchung stark deformierter Bauteile"; Norddeutsches Mechanik-Kolloquium, Universität Hannover, Hannover (Germany); January 2000;
  • S. Reese; "Über das Locking- und Stabilitätsverhalten nichtlinearer FE-Formulierungen, Institut für Mechanik"; Fakultät für Maschinenbau, Otto-von-Guericke-Universität Magdeburg, Magdeburg (Germany); January 2000;
  • S. Reese; "Modellierung und FE-Simulation pneumatischer faserverst ärkter Membran-Konstruktionen"; Habilitationskolloquium, Hannover (Germany); January 2000;
  • S. Reese; "Modelling of the thermo-mechanical material behaviour of rubber-like polymers - micromechanical motivation and numerical simulation"; 1st European Conference on Constitutive Models for Rubber, Vienna (Austria); September 1999;
  • S. Reese; "An automatique control technique to avoid hourglass instabilities in unstructured meshes"; 1st European Conference on Computational Mechanics, München (Germany); September 1999;
  • S. Reese; "Zur Modellierung von orthotropem Materialverhalten in pneumatischen Membranen mittels der Finite-Elemente-Methode"; Cargolifter AG, Brand (Germany); April 1999;
  • S. Reese; "Eine Stabilisierungstechnik zur Vermeidung von Hourglass-Instabilitäten in der finiten Elastizität"; Lehrstuhl für wissenschaftliches Rechnen, Mathematisches Seminar, Christian-Albrechts-Universität Kiel, Kiel (Germany); April 1999;
  • S. Reese; "An adaptive stepsize control for the integration of evolution equations in viscoelasticity"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Metz (France); April 1999;
  • S. Reese, P. Wriggers, L. Krstulovic-Opara; "Smooth interpolations for frictional contact problems"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Metz (France); April 1999;
  • S. Reese; "Modellierung und numerische Simulation des thermomechanischen Verhaltens gummiartiger Polymerbauteile"; 3. Humboldt-Seminar / AK Stoffgesetze, Otto-von-Guericke-Universität Magdeburg (Germany); March 1999;
  • S. Reese; "Finite element modeling of orthotropic material behaviour in pneumatic membranes"; Euromech-Colloquium 394: Theory and Numerics of Anisotropic Materials at Finite Strains, Graz (Austria); March 1999;
  • S. Reese; "Modellierung und numerische Simulation des thermomechanischen Verhaltens gummiartiger Polymerbauteile"; Fakultät für Bauingenieurwesen, Ruhr-Universität Bochum, Bochum (Germany); February 1999;
  • S. Reese; "Modellierung des thermomechanischen Materialverhaltens gummiartiger Polymere: Mikromechanische Motivation und numerische Simulation"; Fachbereich Maschinenbau, Technische Universität Braunschweig, Braunschweig (Germany); January 1999;
  • S. Reese; "A thermo-viscoelastic material model for rubber-like polymers and its micromechanical foundation"; Workshop: Mathematical Approaches to the Continuum Mechanics of Fluids and Solids, Wahlen (Germany); December 1998;
  • S. Reese; "Eine Stabilisierungstechnik zur Vermeidung von Hourglass-Instabilitäten in der finiten Elastizität"; Institut für Mechanik, Fakultät für Bauingenieur- und Vermessungswesen, Universität Karlsruhe (TH), Karlsruhe (Germany); December 1998;
  • S. Reese; "A new locking-free brick element formulation for continuous large deformation problems"; 4th World Conference for Computational Mechanics, Buenos Aires (Argentina); July 1998;
  • S. Reese, P. Wriggers, A. Haraldsson; "Formulierung und Simulation der Kontaktvorgänge bei der Interaktion Boden-Bauwerk"; Antragskolloquium der DFG-Forschergruppe Baugrund-Tragwerk-Interaktion, Darmstadt (Germany); May 1998;
  • S. Reese; "Eine neue Stabilisierungstechnik für finite Elemente in der finiten Elastizität"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik, Bremen (Germany); April 1998;
  • S. Reese; "On the use of the principle of material objectivity in stability investigations in finite elasticity"; Workshop: Mathematical Approaches to the Continuum Mechanics of Fluids and Solids, Wahlen (Germany); February 1998;
  • S. Reese; "Multiplikative Thermoviskoelastizität bei gummiartigen Polymeren: theoretische und numerische Aspekte"; Lehrstuhl für Technische Mechanik, Fachbereich Maschinenbau und Verfahrenstechnik, Universität Kaiserslautern, Kaiserslautern (Germany); February 1998;
  • S. Reese; "Stabilitätsprobleme in der finiten Elastizität"; Institut für Mechanik (AG I), Technische Universität Darmstadt, Darmstadt (Germany); January 1998;
  • S. Reese; "Multiplikative Thermo-Viskoelastizität - eine Analogie zur Elastoplastizität"; Workshop "Große plastische Formänderungen", Bad Honnef (Germany); September 1997;
  • S. Reese; "Stability investigations in finite elasticity"; Centre for Research in Computational and Applied Mechanics, University of Capetown (South Africa); August 1997;
  • S. Reese; "Multiplikative Thermoviskoelastizität bei gummiartigen Polymeren: theoretische und numerische Aspekte"; Institut für Mechanik (Bauwesen), Fachbereich Bauingenieur- und Vermessungswesen, Universität Stuttgart, Stuttgart (Germany); June 1997;
  • S. Reese; "Thermoviscoelastic material behaviour at finite deformations with temperature-dependent material parameters"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik, Regensburg (Germany); March 1997;
  • S. Reese; "Thermoviscoelastic material behaviour: theoretical and numerical aspects"; 5th International Conference on Computational Plasticity, Barcelona (Spain); March 1997;
  • S. Reese; "Material-Instabilitäten in der finiten Elastizität"; Institut für Mechanik, Technische Universität Wien, Wien (Austria); November 1996;
  • S. Reese; "Stabilitätsuntersuchungen in der finiten Elastizität"; Institut für Mechanik, Fakultät für Maschinenbau, Otto-von-Guericke-Universität Magdeburg, Magdeburg (Germany); November 1996;
  • S. Reese; "Finite viscoelasticity: theoretical and numerical aspects"; MARC Analysis Corporation Headquarters, Palo Alto (USA); August 1996;
  • S. Reese; "Elastoplastic material behaviour with large elastic and large plastic deformations"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Prague (Czech Republic); May 1996;
  • S. Reese; "Finite viscoelasticity, Structural Engineering, Mechanics and Materials"; Department of Civil Engineering and Environmental Engineering, University of California at Berkeley (USA); January 1996;
  • S. Reese; "Theorie und Numerik des Stabilitätsverhaltens hyperelastischer Festkörper"; Institut für Baustatik, Fachbereich Bauingenieur- und Vermessungswesen, Universität Karlsruhe (TH), Karlsruhe (Germany); September 1995;
  • S. Reese; "Finite element calculation of the stability behaviour of hyperelastic solids with the enhanced strain method"; International Congress of Industrial and Applied Mathematics, Hamburg (Germany); July 1995;
  • S. Reese; "Theorie und Numerik des Stabilitätsverhaltens hyperelastischer Festkörper"; Institut für Mechanik, Fachbereich Maschinenbau, Gesamthochschule Kassel, Kassel (Germany); November 1994;
[1-711] 712-716 [ALLE 1-716]

Abschlußinformationen