Hilfsnavigation

IFAM-Logo

Zielgruppennavigation

 

Inhalt

Präsentationen (716)

 

  • J. Kochmann, J. Rezaeimianroodi, S. Reese, B. Svendsen; "Fourier-transform based phase-field modeling coupled with the finite element method"; 8th GAMM-Seminar on Multiscale Material Modeling, Hamburg (Germany); July 2014;
  • J.-W. Simon, B. Stier, S. Reese; "Multiscale modeling of laminated composites with textile reinforcement"; 8th GAMM-Seminar on Multiscale Material Modeling, Hamburg (Germany); July 2014;
  • J.-W. Simon, Y. Li, S. Reese; "Modeling the creasing of paperboard"; 11th World Congress on Computational Mechanics (WCCM11), Barcelona (Spain); July 2014;
  • S. Reese, J. Frischkorn; "Reduced integration with hourglass stabilization – issues of stability and robustness"; 11th World Congress on Computational Mechanics (WCCM11), Barcelona (Spain); July 2014;
  • T. Brepols, I. N. Vladimirov, S. Reese; "Hypo- and hyperelastic-based approaches in finite strain elastoplasticity with application to industrial forming processes"; 1st International Workshop on Software Solutions for ICME, Rolduc (Netherlands); June 2014;
  • S. Reese; "Introduction – simulation of joining processes"; 6th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation (ICTMP), Darmstadt (Germany); June 2014;
  • S. Reese, D. Sodhani; "Finite element micro-field simulation illustrating the effect of micro-structure morphology on stress softening in filled elastomer networks"; guest lecture in Department of Applied Mechanics, Chalmers University of Technology, Gothenburg (Sweden); June 2014;
  • B. Stier, B. Bednarcyk, J.-W. Simon, S. Reese; "Modeling of damage at the meso- and micro-scale in textile composites"; 17th U.S. National Congress on Theoretical & Applied Mechanics, Lansing (USA); June 2014;
  • B. A. Bednarcyk, B. Stier, E. J. Pineda, J. Simon, S. Reese; "Meso- and micro-scale modeling of damage in textile composites"; 1st International Conference on Mechanics of Composites (ICMC1), Stony Brook (USA); June 2014;
  • J.-W. Simon, D. Höwer, B. Stier, S. Reese; "Meso-mechanically motivated modeling of layered fiber reinforced composites accounting for delamination"; 1st International Conference on Mechanics of Composites (ICMC1), Stony Brook (USA); June 2014;
  • R. Kebriaei, I. N. Vladimirov, S. Reese; "Multiscale modeling of joining processes with application to roll bonding"; 6th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation (ICTMP), Darmstadt (Germany); June 2014;
  • R. Kebriaei, I. N. Vladimirov, S. Reese; "Experimental chemo-mechanical characterization and multiscale modeling of the alloys AA1050, AA2024 and AA5754 - application to roll bonding"; 17th Annual Esaform Conference on Material Forming, Espoo (Finland); May 2014;
  • T. J. Grilo, I. N. Vladimirov, R. A. F. Valente, S. Reese; "Modelling non-quadratic anisotropic yield criteria and mixed isotropic-nonlinear kinematic hardening at finite strains"; 17th Annual Esaform Conference on Material Forming, Espoo (Finland); May 2014;
  • I. N. Vladimirov, M. P. Pietryga, S. Reese; "On the use of explicit and implicit exponential map algorithms of finite strain combined hardening plasticity in the simulation of draw bending"; 17th Annual Esaform Conference on Material Forming, Espoo (Finland); May 2014;
  • S. Reese, D. Sodhani; "Finite element micro-field simulation illustrating the effect of micro-structure morphology on stress softening in filled elastomer networks"; 14th Dresden Polymer Discussion, Meißen (Germany); May 2014;
  • M. Fassin, V. Tini, I. Vladimirov, S. Reese; "Lebensdauervorhersage einer Raketenbrennkammerwand mit einem viskoplastischen Schädigungsmodell"; Arbeitskreis Stoffgesetze, Geesthacht (Germany); May 2014;
  • T. Brepols, I. N. Vladimirov, S. Reese; "Anwendungen von hypo- und hyperelastisch-basierten Modellen finiter Elastoplastizität in der Umformtechnik"; Arbeitskreis Stoffgesetze, Geesthacht (Germany); May 2014;
  • L. Renken, J. Wimmer; "Simulationsgestützte Entwicklung neuer Straßenbaustoffe und innovativer Herstellungs- und Einbautechnologien"; 2te Innovationsarena der Bundesanstalt für Straßenwesen (BASt), Bergisch-Gladbach (Germany); April 2014;
  • M. Fassin, V. Tini, I. Vladimirov, S. Reese; "Lifetime prediction of a rocket combustion chamber wall by a viscoplastic damage model"; 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • Y. Li, J.-W. Simon, S. Reese; "Experimental and numerical investigation of paperboard creasing"; 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • J. Kochmann, J. Rezaeimianroodi, S. Reese, B. Svendsen; "Two-dimensional elastic phase-field simulation of fcc to bcc martensitic phase transformations in polycrystals"; 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • J. Wimmer, J. Schnepp, S. Reese; "Modelling and simulation of asphalt"; 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • S. Reese, J. Frischkorn, R. Kebriaei, J. Kochmann, A. Radermacher, I. Vladimirov; "Scale transitions in multifield problems – applications in production technology and biomechanics"; plenary lecture, 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen (Germany); March 2014;
  • S. Reese, A. Radermacher; "Macro-“holo” transitions in non-linear solid mechanics"; 6th Polish-German Winter Colloquium, La Clusaz (France); February 2014;
  • S. Reese, A. Radermacher; "Projection-based model reduction - applications in non-linear solid mechanics"; International Symposium on "Reduced Order Models in Computational Science and Engineering", Aachen (Germany); January 2014;
  • S. Reese, D. Sodhani; "Finite element-based modelling to demonstrate the influence of micro-mechanical phase interactions on filler reinforced elastomers"; keynote lecture, International Symposium on Plasticity and Its Current Applications, Freeport (Bahamas); January 2014;
  • J.-W. Simon, B. Stier, S. Reese; "Multiscale modeling of fiber reinforced laminated composites"; 26th Workshop: Research in Mechanics of Composites, Paderborn (Germany); December 2013;
  • S. Reese, A. Radermacher; "POD-based model reduction in biomechanics and forming processes"; 2nd International Workshop on Reduced Basis, POD and PGD, Blois (France); November 2013;
  • A. Radermacher, S. Reese; "Sub-structuring combined with POD - applied to incremental sheet metal forming simulations"; 2nd International Workshop on Reduced Basis, POD and PGD, Blois (France); November 2013;
  • S. Reese, J. Frischkorn; "Modeling of stents by means of a new solid-beam finite element technology"; International Conference on Biomedical Technology (ICBT), Hannover (Germany); November 2013;
  • S. Reese, A. Radermacher; "Projection-based model reduction in non-linear solid mechanics - application in biomechanics and beyond"; Colloquium of the Cluster of Excellence “Simulation Technology”, Stuttgart (Germany); November 2013;
  • Y. Kiliclar, O. K. Demir, I. N. Vladimirov, L. Kwiatkowski, S. Reese, A. E. Tekkaya; "Application of a viscoplastic material model on a combined quasi-static and electromagnetic forming process"; International Impulse Forming Group (I²FG), Chemnitz (Germany); November 2013;
  • J.-W. Simon; "The influence of kinematical hardening on incremental collapse, alternating plasticity, and the corresponding residual stress fields"; 4th International Workshop on Direct Methods, Reggio Calabria (Italy); October 2013;
  • S. Reese, D. Sodhani; "Finite element micro-field simulation illustrating the effect of stress softening"; plenary lecture, Elastomery 2013 “Science and Industry”, 15th International Science and Technology Conference, Warsaw (Poland); October 2013;
  • A. Radermacher, S. Reese; "Selective POD-based model reduction techniques for incremental sheet metal forming simulations"; Aachen Conference on Computational Engineering Science 2013, Aachen (Germany); September 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Multiscale modeling of layered fiber reinforced composites accounting for delamination"; 8th German-Greek-Polish Symposium on Recent Advances in Mechanics, Goslar (Germany); September 2013;
  • S. Reese, Y. Kiliclar, I. N. Vladimirov; "A new anisotropic model of coupled damage-viscoplasticity - application in electromagnetic forming processes"; 3rd International Conference on Material Modelling (ICMM3), Warsaw (Poland); September 2013;
  • S. Reese, Y. Kiliclar, I. N. Vladimirov; "Combined quasi-static deep drawing and electromagnetic forming – new material modeling and numerical treatment"; 12th International Conference on Computational Plasticity, Barcelona (Spain); September 2013;
  • J. Schnepp; "Gradient theories, micromorphic theories, and continuum theories of defects - A comparison considering thermodynamic coupling"; 12th International Conference on Computational Plasticity (COMPLAS12), Barcelona (Spain); September 2013;
  • J. Schnepp; "Lagrangian functions for defects in three- and four-dimensional material manifolds"; 3rd International Conference on Material Modelling (ICMM3), Warsaw (Poland); September 2013;
  • I. N. Vladimirov, M. P. Pietryga, S. Reese; "Efficient FE strategies for springback prediction – material modelling and computational aspects"; 12th International Conference on Computational Plasticity, Barcelona (Spain); September 2013;
  • I. N. Vladimirov, M. Pietryga, S. Reese, Y. Kiliclar, V. Tini, T. Brepols, R. Kebriaei; "Anisotropic finite strain elastoplasticity with application to metal forming processes"; plenary lecture, 12th National Conference on Theoretical and Applied Mechanics, St. St. Constantine and Helena (Bulgaria); September 2013;
  • J. Wimmer, J. Schnepp, S. Reese; "Geometric modelling of asphalt concrete"; 5th GACM Colloquium on Computational Mechanics, Hamburg (Germany); September 2013;
  • S. Reese, D. Sodhani; "Finite element micro-field simulation illustrating the effect of filler-filler interaction on stress softening in filled elastomers"; International Conference on Polymer Interphases & Interfaces, Frankfurt (Germany); September 2013;
  • M. Fassin, I. Münch; "Simulation of magneto-elastic material"; 5th GACM Colloquium on Computational Mechanics, Hamburg (Germany); September 2013;
  • Y. Li, J.-W. Simon, S. Reese; "Microsphere-based homogenization for unidirectional fiber reinforced composites"; 5th GACM Colloquium on Computational Mechanics, Hamburg (Germany); September 2013;
  • R. Kebriaei, I. N. Vladimirov, S. Reese; "New mechanisms for joining and coating of dissimilar metals-application to sheet and bulk metal forming"; 5th GACM Colloquium on Computational Mechanics, Hamburg (Germany); September 2013;
  • B. Stier, J.-W. Simon, S. Reese; "Experimental and numerical investigation of woven carbon fiber reinforced plastics"; Composites Week @ Leuven and TexComp-11 Conference, Leuven (Belgium); September 2013;
  • A. Radermacher, S. Reese; "POD-based model reduction in biomechanics and forming processes"; 1st International Workshop on Order-Reduction Methods for Application to Mechanics of Materials (WORM2013), Bad Herrenalb (Germany); August 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Evaluating layered fiber composite structures accounting for the onset of delamination"; 19th International Conference on Composite Materials (ICCM19), Montreal (Canada); July 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Meso-mechanically motivated modeling of layered fiber reinforced composites accounting for the onset of delamination"; 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh (USA); July 2013;
  • I. N. Vladimirov, M. P. Pietryga, S. Reese; "Constitutive modelling and numerical aspects of simulating springback in sheet metal forming"; 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh (USA); July 2013;
  • B. Stier, J.-W. Simon, S. Reese; "Meso-mechanical investigation of woven carbon fiber reinforced plastics"; 19th International Conference on Composite Materials (ICCM19), Montreal (Canada); July 2013;
  • B. Stier, J.-W. Simon, S. Reese; "Comparison of numerical and experimental results of woven fiber reinforced plastics at the meso scale"; 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh (USA); July 2013;
  • D. Sodhani, S. Reese; "Finite element micro-field simulation illustrating the effect of filler-filler interaction on stress softening in filled elastomers"; 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh (USA); July 2013;
  • B. Stier, J.-W. Simon, S. Reese; "Comparing experimental results to a meso scale approach of woven fiber reinforced plastics"; GAMM Multiscale Material Modeling Seminar, Dresden (Germany); June 2013;
  • M. Rozgic, M. Stiemer, Y. Kiliclar, I. N. Vladimirov, S. Reese; "Numerical algorithms for the identification of optimal parameters in material models for industrial forming processes"; SIAM Conference on Mathematical Aspects of Materials Science, Philadelphia (USA); June 2013;
  • J.-W. Simon; "On the restrictions of kinematical hardening laws in lower bound shakedown analysis"; Euromech Colloquium 548: Direct and Variational Methods for Nonsmooth Problems in Mechanics, Amboise (France); June 2013;
  • J. Wimmer, J. Schnepp, J.-W. Simon, S. Reese; "Simulationsgestützte Entwicklung neuer Straßenbaustoffe und innovativer Herstellungs- und Einbauverfahren"; GAMM Multiscale Material Modeling Seminar, Dresden (Germany); June 2013;
  • D. Sodhani, S. Reese; "Finite element based micro-mechanical modelling of micro-structure morphology in filler reinforced elastomer"; 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastian (Spain); June 2013;
  • S. Reese, R. Kebriaei; "Advanced material and structural behavior in innovative forming processes – application to process-integrated ring rolling"; keynote lecture, Computational Methods for Coupled Problems in Science and Engineering, Santa Eulalia (Spain); June 2013;
  • T. Brepols, I. N. Vladimirov, S. Reese; "Comparison of hyper- and hypoelastic-based formulations of elastoplasticity with applications to metal forming"; 16th Annual ESAFORM Conference on Material Forming, Aveiro (Portugal); April 2013;
  • Y. Kiliclar, O. K. Demir, I. N. Vladimirov, L. Kwiatkowski, S. Reese, A. E. Tekkaya; "Simulation of electromagnetic forming of a cross shaped cup by means of a viscoplasticity model coupled with damage at finite strains"; 16th Annual Esaform Conference on Material Forming, Aveiro (Portugal); April 2013;
  • I. N. Vladimirov, S. Reese; "Prediction of springback in unconstrained bending by a model for evolving elastic and plastic anisotropy"; 16th Annual Esaform Conference on Material Forming, Aveiro (Portugal); April 2013;
  • R. Kebriaei, I. N. Vladimirov, S. Reese; "Material modeling and numerical analysis of the heat treatment in high carbon steels-application to ring rolling"; 16th Annual Esaform Conference on Material Forming, Aveiro (Portugal); April 2013;
  • A. Radermacher, S. Reese, A. Hadoush; "Selective proper orthogonal decomposition model reduction for forming simulations"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • Y. Kiliclar, O. K. Demir, I. N. Vladimirov, L. Kwiatkowski, S. Reese, A. E. Tekkaya; "Application of a viscoplastic material model on a combined quasi-static and electromagnetic forming process"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Predicting the onset of delamination in layered fiber-reinforced composites"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • I. N. Vladimirov, M. Bambach, M. Herty, H. M. Bücker; "Identification of optimal material models and parameters in finite strain plasticity"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • T. Brepols, I. N. Vladimirov, S. Reese; "Application and evaluation of hyper- and hypoelastic-based plasticity models in the FE simulation of metal forming processes"; 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad (Serbia); March 2013;
  • I. N. Vladimirov, S. Reese; "A finite strain model for evolving elastic and plastic anisotropy with application to deep drawing processes"; International Symposium on Plasticity 2013, Nassau (Bahamas); January 2013;
  • J.-W. Simon, B. Stier, S. Reese; "Numerical evaluation of fiber composites accounting for delamination"; 25th International Workshop: Research in Mechanics of Composites, Bad Herrenalb (Germany); December 2012;
1-72 73-144 145-216 217-288 [289-360] 361-432 433-504 505-576 577-648 649-716 [ALLE 1-716]

Abschlußinformationen