Hilfsnavigation

IFAM-Logo

Zielgruppennavigation

 

Inhalt

Präsentationen (716)

 

  • J. Frischkorn, S. Reese; "New solid-shell and solid-beam finite elements with applications to medical technology"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011;
  • J. Frischkorn, R. Kebriaei, S. Reese; "Finite element modelling of process-integrated powder coating by radial axial rolling of rings"; The 14th International ESAFORM Conference on Material Forming, Belfast (Northern Ireland), April 2011;
  • M. Pietryga, I. N. Vladimirov, S. Reese; "Constitutive modelling of evolving flow anisotropy including distortional hardening"; The 14th International ESAFORM Conference on Material Forming, Belfast (Northern Ireland), April 2011;
  • I. N. Vladimirov, V. Tini, Y. Kiliclar, S. Reese; "On the material modelling of anisotropy, hardening and failure of sheet metals in the finite strain regime"; The 14th International ESAFORM Conference on Material Forming, Belfast (Northern Ireland), April 2011;
  • I. N. Vladimirov, Y. Kiliclar, V. Tini, S. Reese; "Constitutive modelling of anisotropy, hardening and failure of sheet metals"; SheMet2011, Leuven (Belgium), April 2011;
  • J. Schnepp; "Thermodynamics in material space-time"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011;
  • B. Stier, S. Reese; "Verification of an optical metrology system (Aramis) by comparing experimental data with FE calculations and continuum approaches"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011;
  • Y. Kiliclar, I. N. Vladimirov, R. Laurischkat, M. Schwarze, S. Reese, H. Meier; "Constitutive modelling and finite element technology for the simulation of robot based incremental sheet metal forming"; SheMet2011, Leuven (Belgium), April 2011;
  • S. Reese; "Stabilitätsprobleme in der Finite-Elemente-Technologie"; 60th Birthday Colloquium of Prof. Peter Wriggers, Hannover (Germany), February 2011;
  • S. Reese, J. Frischkorn, Y. Kiliclar, M. Pietryga, A. Radermacher, M. Schwarze, V. Tini, I. N. Vladimirov; "New strategies of computational modelling in production and medical technology"; University of Liege, Faculty of Applied Sciences (Aerospatiale et Mecanique), Liege (Belgium), February 2011;
  • S. Reese, J. Frischkorn, Y. Kiliclar, M. Pietryga, M. Schwarze, I. N. Vladimirov; "Different aspects of the computational modelling of production processes - anisotropic plasticity and FE technology"; keynote lecture, International Symposium on Plasticity 2011, Puerto Vallarta (Mexico), January 2011;
  • S. Reese, M. Böl; "On the relation between polymer physics and finite element modelling - non-linear elasticity & inelasticity"; introductory lecture, Workshop "From polymer physics to rubber elasticity", Institut Henri Poincare, Paris (France), January 2011;
  • S. Reese, M. Schwarze, J. Frischkorn, I. N. Vladimirov; "Non-linear finite element technology - theory, discussion of stability and applications"; Seminar of the Aachen Institute for Advanced Study in Computational Engineering Science (AICES), Aachen (Germany), January 2011;
  • I. N. Vladimirov, M. Pietryga, Y. Kiliclar, V. Tini, S. Reese; "Constitutive modelling of anisotropy, hardening and failure of metallic materials – forming applications"; DSM Scientific Meeting "Mechanics of Materials", Vaals (The Netherlands), November 2010;
  • J. Frischkorn, M. Schwarze, D. Juhre, S. Reese; "Finite element technology for NiTi and shape memory polymer stents"; DSM Scientific Meeting "Mechanics of Materials", Vaals (The Netherlands), November 2010;
  • S. Reese, I. Vladimirov, J. Frischkorn, R. Kebriaei, Y. Kiliclar, M. Pietryga, A. Radermacher, B. Stier, V. Tini; "Introduction of the institute - computational modelling in production technology, polymer mechanics and medical technology"; DSM Scientific Meeting "Mechanics of Materials", Vaals (The Netherlands), November 2010;
  • I. N. Vladimirov, S. Reese; "On the constitutive modelling of anisotropic elastoplastic materials – prediction of earings in sheet forming"; 7th German-Greek-Polish Symposium on Recent Advances in Mechanics, Poznan (Poland), September 2010;
  • S. Reese, M. Pietryga, I. Vladimirov, M. Schwarze, J. Frischkorn; "Anisotropic finite plasticity in production technology - experimental validation and finite element modelling"; Seminar of Mathematical Material Sciences, Centre for Technomathematics, University of Bremen, Bremen (Germany), June 2010;
  • S. Reese, J. Frischkorn, Y. Kiliclar, M. Pietryga, A. Radermacher, M. Schwarze, V. Tini, I. Vladimirov; "Challenges of computational modelling in production and medical technology"; Seminar of the Department of Ferrous Metallurgy, RWTH University Aachen, Aachen (Germany), June 2010;
  • S. Reese, J. Frischkorn, Y. Kiliclar, M. Pietryga, A. Radermacher, M. Schwarze, V. Tini, I. Vladimirov; "Challenges of computational modelling in production and medical technology"; plenary lecture, 4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010;
  • I. N. Vladimirov, M. Schwarze, S. Reese; "A finite strain anisotropic plasticity formulation for metal forming processes"; keynote lecture, 4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010;
  • M. P. Pietryga, I. N. Vladimirov, S. Reese; "Continuum mechanical material modelling of anisotropy with application to sheet metal forming"; 4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010;
  • J. Frischkorn, S. Reese; "Modelling the compaction of metal powder and its application towards FE simulations of a new coating process"; 4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010;
  • S. Reese, M. Schwarze, I. N. Vladimirov; "A new continuum shell finite element for sheet metal forming applications"; The 13th International ESAFORM Conference on Material Forming, Brescia (Italy), April 2010;
  • I. N. Vladimirov, M. Schwarze, M. P. Pietryga, J. Frischkorn, S. Reese; "A large deformation multiplicative framework for anisotropic elastoplastic materials with application to sheet forming"; The 13th International ESAFORM Conference on Material Forming, Brescia (Italy), April 2010;
  • S. Reese, J. Frischkorn, M. Pietryga, M. Schwarze, I. N. Vladimirov; "New aspects in the computational modelling of production processes"; NAFEMS Awareness Seminar "Finite Elements and Numerical Simulation in Forming Processes", Aveiro (Portugal), April 2010;
  • S. Reese, M. Schwarze, I. N. Vladimirov; "A new solid-shell finite element technology for sheet metal applications"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010;
  • I. N. Vladimirov, M. Schwarze, S. Reese; "Anisotropic multiplicative elastoplasticity for the prediction of springback and earings in sheet metal forming"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010;
  • V. Tini, S. Reese; "A viscoplastic-damage model for the lifetime prediction of regeneratively cooled nozzle structures"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010;
  • Y. Kiliclar, I. Vladimirov, M. Schwarze, S. Reese; "Constitutive modelling and finite element technology for different forming processes"; 2nd German-Japanese Workshop on Computational Mechanics, Yokohama (Japan), March 2010;
  • S. Reese, J. Frischkorn, M. Pietryga, M. Schwarze, I. N. Vladimirov; "New contributions in mechanics to material and process modelling"; SimPRO Meeting, Aachen (Germany), January 2010;
  • S. Reese, C. Bertsch, J. Frischkorn, M. Pietryga, M. Schwarze, I. Vladimirov; "New aspects in the modelling of production processes"; plenary lecture, GACM Colloquium, Hannover (Germany); September 2009;
  • M. Böl, S. Reese; "A direction dependent approach to the modeling of shape memory polymers"; 6th European Conference on Constitutive Models for Rubber, Dresden (Germany); September 2009;
  • V. Tini, S. Reese; "A viscoplastic material model for the lifetime prediction of regeneratively cooled nozzle structures"; GACM Colloquium, Hannover (Germany); September 2009;
  • J. Frischkorn, S. Reese; "FE simulation of coating ring-shaped work pieces with particle reinforced MMC layers"; 1st International Conference on Material Modelling (poster presentation), Dortmund (Germany); September 2009;
  • J. Frischkorn, S. Reese; "Modelling the powder metallurgical production of MMC coatings"; 10th International Conference on Computational Plasticity, Barcelona (Spain); September 2009;
  • M. P. Pietryga, I. N. Vladimirov, S. Reese; "Continuum mechanical material modelling of elastic and plastic anisotropy with application to sheet metal forming"; 10th International Conference on Computational Plasticity, Barcelona (Spain); September 2009;
  • C. Bertsch, M. Schwarze, S. Reese; "Numerical aspects in the simulation of robot based incremental sheet metal forming"; 10th International Conference on Computational Plasticity, Barcelona (Spain); September 2009;
  • M. P. Pietryga, I. N. Vladimirov, S. Reese; "Continuum mechanical material modelling of elastic and plastic anisotropy with application to sheet metal forming"; 1st International Conference on Material Modelling (poster presentation), Dortmund (Germany); September 2009;
  • S. Reese, D. Christ, M. Böl, J. Frischkorn; "Finite element simulation of coated stents"; Collquium des SFB 499, University of Hannover, Hannover (Germany); June 2009;
  • J. Frischkorn, S. Reese; "Herstellung pulvermetallurgischer Funktionsschichten im Ringwalzprozess - Modellierung und Simulation"; 2. Forum Metallplastizität / AK Stoffgesetze, Karlsruhe (Germany); May 2009;
  • M. P. Pietryga, I. N. Vladimirov, S. Reese; "Elastische und plastische Anisotropie - Kontinuumsmechanische Modellierung und numerische Umsetzung"; 2. Forum Metallplastizität / AK Stoffgesetze, Karlsruhe (Germany); May 2009;
  • M. Schwarze, I. N. Vladimirov, S. Reese; "On the implementation of the EAS and ANS concept into a reduced integration continuum shell element and applications to sheet forming"; The 12th International ESAFORM Conference on Material Forming, Enschede (The Netherlands); April 2009;
  • S. Reese, M. P. Pietryga, I. N. Vladimirov; "Anisotropic finite plasticity based on structural tensors - different strategies and application to forming simulations"; The 12th International ESAFORM Conference on Material Forming, Enschede (The Netherlands); April 2009;
  • S. Reese, D. Christ, M. Böl; "Stent implants - modelling and further ideas"; 4th Polish-German Winter Colloquium, La Clusaz (France); March 2009;
  • M. Böl, S. Reese; "Finite Element Approaches for the Modelling of Shape Memory Polymers"; Zentrum für Biomaterialentwicklung, Institut für Polymerforschung, GKSS-Forschungszentrum Geesthacht GmbH, Teltow (Germany); March 2009;
  • S. Reese, C. Bertsch, M. Böl, D. Christ, J. Frischkorn, M. Schwarze, V. Tini, I. Vladimirov; "Innovative Applications of Mechanics in Technical Sciences"; Eidgenössische Technische Hochschule Zürich (Switzerland); March 2009;
  • C. Bertsch, M. Schwarze, S. Reese; "Numerische Aspekte bei der Finite-Elemente-Modellierung von Blechumformprozessen"; Workshop Impulsumformung, Dortmund (Germany); March 2009;
  • A. S. Obaid, S. Reese; "Coupling of Substructures Based on Data Base"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland); February 2009;
  • S. Reese, M. Schwarze; "A new large deformation solid-shell formulation incorporating the ANS concept"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland); February 2009;
  • V. Tini, S. Reese; "A material model for the lifetime prediction of regeneratively cooled noozle structures"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland); February 2009;
  • C. Bertsch, R. Laurischkat, S. Reese, H. Meier; "A coupled process-structure-model to simulate robot based incremental sheet metal forming"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland); February 2009;
  • H. Meier, S. Reese, C. Bertsch, R. Laurischkat; "Erhöhung der Maßhaltigkeit von Blechbauteilen durch eine modellgestützte Bahnplanung für die roboterbasierte Blechumformung"; Antragskolloquium des DFG-Schwerpunktprogramms 1180 "Prognose und Beeinflussung der Wechselwirkungen von Strukturen und Prozessen", Bonn (Germany); January 2009;
  • S. Reese, M. Böl; "Kaputtes Herz, zuckender Muskel - heilen mit dem Computer?"; Vortrag im Rahmen des Studium generale 2008 der Technischen Universität Braunschweig, Braunschweig (Germany); October 2008;
  • S. Reese, M. Böl, D. Christ; "On the modelling of smart materials in medical technology"; 18th International Symposium on Computational Mechanics of Materials, Beiing (China); October 2008;
  • C. Bertsch, R. Laurischkat, H. Meier, S. Reese; "Increase of the Dimensional Accuracy of Sheet Metal Parts utilizing a Model-Based Path Design for Robote-Based Forming Processes"; 1st International Conference on Process-Machine-Interactions, Hannover (Germany); September 2008;
  • S. Reese, C. Bertsch, M. Böl, D. Christ, J. Frischkorn, C. Rickelt, M. Schwarze, I. Vladimirov; "Innovative Anwendungen der Mechanik im Ingenieurwesen"; Fakultät für Bauingenieurwesen, RWTH Aachen, Aachen (Germany); September 2008;
  • S. Reese, M. Böl; "Finite element-based multiscale modelling of phase interactions in filler reinforced elastomers"; Euromech Colloquium 502 on Reinforced Elastomers, Dresden (Germany); September 2008;
  • S. Reese, I. N. Vladimirov, M. Schwarze, M. Pietryga; "Anisotropic Modelling and Finite Element Technology for the Simulation of Forming Processes"; Otto-von-Guericke University Magdeburg, Magdeburg (Germany); August 2008;
  • M. Stelzer, O. v. Stryk, E. Abele, J. Bauer, C. Bertsch, S. Reese, R. Laurischkat, H. Meier; "Comparison of implementations of a flexible joint multibody dynamics system for an industrial robot"; 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, Naples (Italy); July 2008;
  • M. Böl, S. Reese, K. K. Parker, E. Kuhl; "Three-Dimensional Muscle Modelling"; 8th World Conference on Computational Mechanics, Venice (Italy); July 2008;
  • S. Reese, I. N. Vladimirov, M. P. Pietryga; "Anisotropic finite plasticity with evolving structural tensors"; 2nd Workshop on Multiscale Material Modelling, Stuttgart (Germany); July 2008;
  • S. Reese, G. Silber, D. Christ, M. Böl; "Stent implants - modelling and numerical issues"; 8th World Conference on Computational Mechanics, Venice (Italy); July 2008;
  • S. Reese, M. Schwarze, D. Christ, I. N. Vladimirov; "New aspects in material modelling and finite element technology for forming simulations"; 8th World Conference on Computational Mechanics, Venice (Italy); July 2008;
  • J. Frischkorn, S. Reese; "Finite Element Modelling of Process Integrated Powder Coating"; 8th World Conference on Computational Mechanics, Venice (Italy); July 2008;
  • M. Böl, S. Reese; "Micromechanical modelling of shape memory polymers"; 3rd International Conference Smart Materials, Structures & Systems, Sicily (Italy); June 2008;
  • I. N. Vladimirov, S. Reese; "Anisotropic finite plasticity with combined hardening and application to sheet metal forming"; 11th ESAFORM Conference on Material Forming, Lyon (France); April 2008;
  • A. Abeed, S. Reese; "Multi-time step domain decomposition methods"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
  • C. Bertsch, A. Cisilino, S. Langer, S. Reese; "Optimierung der Topologien elastischer Körper in 3D mittels der Randelementemethode"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
  • M. Böl, A. Pipetz, S. Reese; "Modelling of skeletal muscle activation, fatigue and recovery"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
  • J. Unger, M. Stiemer, B. Svendsen, H. Blum, M. Schwarze, S. Reese; "Modeling and simulation of 3D EMF processes with failure limit prediction"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
  • J. Frischkorn, S. Reese; "Simulation of powder metallurgical coating by longitudinal and ring rolling"; Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany); April 2008;
1-72 73-144 145-216 217-288 289-360 361-432 [433-504] 505-576 577-648 649-716 [ALLE 1-716]

Abschlußinformationen