Hilfsnavigation

IFAM-Logo

Zielgruppennavigation

 

Inhalt

Publikationen (21  -  2007)

 

  • S. Reese; "A large deformation solid-shell concept based on reduced integration with hourglass stabilization"; International Journal for Numerical Methods in Engineering; 2007; Vol. 69, 1671-1716; ;
  • S. Reese, C. Rickelt; "A model-adaptive hanging node concept based on a new non-linear solid-shell formulation"; Computer Methods in Applied Mechanics and Engineering; 2007; Vol. 197, 61-79; ;
  • M. Böl, S. Reese; "A new approach for the simulation of skeletal muscles using the tool of statistical mechanics"; Material Science and Engineering Technology; 2007; Vol. 38, 955-964; ;
  • A. Kompalka, S. Reese, O. T. Bruhns; "Experimental investigation of damage evolution by data-driven stochastic subspace identification and iterative finite element model updating"; Archive of Applied Mechanics; 2007; Vol. 77, 559-573; ;
  • A. Kostka, G. Mälzer, G. Eggeler, A. Dlouhy, S. Reese, T. Mack; "L12-phase cutting during high temperature and low stress creep of a Re-containing Ni-based single crystal superalloy"; Journal of Materials Science; 2007; Vol. 42, 3951-3957; ;
  • M. P. Pietryga, I. N. Vladimirov, S. Reese; "Comparison of two integration algorithms for finite plasticity combined with nonlinear kinematic and isotropic hardening at the example of springback"; Proceedings in Applied Mathematics and Mechanics; 2007; Vol. 7, 4060033–4060034; ;
  • M. Schwarze, S. Reese; "The use of an hourglass stabilized solid-shell finite element in forming simulations - theoretical aspects and first industrial applications"; Proceedings in Applied Mathematics and Mechanics; 2007; Vol. 7, 4040003-4040004; ;
  • C. Rickelt, S. Reese; "Efficient life time investigations of partially damaged structures applying dynamic substructuring and model reduction"; Proceedings of COMPDYN 2007 Computational Methods in Structural Dynamics and Earthquake Engineering; Crete, Greece (2007), Paper ID 1046; ;
  • S. Reese, M. Schwarze; "Adaptive hourglass stabilization in forming simulations by means of reduced integration"; Proceedings of Computational Plasticity IX - Fundamentals and Applications, Eds.: E. Onate, D.R.J. Owen and B. Suarez; International Center for Numerical Methods in Engineering, Barcelona, Spain (2007), 277-280; ;
  • J. Frischkorn, S. Reese; "A finite deformation model to describe compaction and sintering effects in metal powders"; Proceedings of the 9th IMPLAST Symposium on Plasticity and Impact Mechanics, Eds.: O. T. Bruhns, A. Meyers; The University Press Bochum, Germany (2007), 469-476; ;
  • J. Unger, M. Stiemer, M. Schwarze, B. Svendsen, H. Blum, S. Reese; "3D multifield modeling of electromagnetic metal forming processes"; Proceedings of the 9th IMPLAST Symposium on Plasticity and Impact Mechanics, Eds.: O. T. Bruhns, A. Meyers; The University Press Bochum, Germany (2007), 545-551; ;
  • I. N. Vladimirov, S. Reese; "Springback prediction by means of a combined isotropic/kinematic hardening material model"; Proceedings of the 9th IMPLAST Symposium on Plasticity and Impact Mechanics, Eds.: O. T. Bruhns, A. Meyers; The University Press Bochum, Germany (2007), 469-476; ;
  • I. N. Vladimirov, S. Reese; "A finite-strain isotropic/kinematic hardening model for springback simulation of sheet metals"; Proceedings of the 10th ESAFORM Conference on Material Forming, Eds.: E. Cueto, F. Chinesta; American Institute of Physics Conference Proceedings Volume 907 (2007), 139-145; ;
  • S. Reese, M. Böl, D. Christ; "Multi-scale problems in biomechanics and medical technology"; Proceedings of the ECCOMAS Thematic Conference on Multi-scale Computational Methods for Solids and Fluids, Eds.: A. Ibrahimbegovic, F. Dias, H. Matthies, P. Wriggers; ENS-Cachan, France (2007), 216-220; ;
  • J. Frischkorn, S. Reese; "Simulating solid state sintering and compaction of metal powder in the finite strain regime"; Proceedings in Applied Mathematics and Mechanics 7; Zürich, Switzerland (2007), 4060001–4060002; ;
  • M. Schwarze, S. Reese; "Finite element technology in forming simulations - theoretical aspects and practical applications of a new solid-shell element"; Materials Processing and Design: Modeling, Simulation and Applications, Proceedings of the 9th International Conference on Industrial Forming Processes, Eds.: J. M. A. Cesar de Sa, A. D. Santos, American Institute of Physics Conference Proceedings; 2007, Vol. 908, 1513-1518; ;
  • S. Reese, I. N. Vladimirov, M. Schwarze; "A new solid-shell finite element technology incorporating plastic anisotropy in forming simulations"; Materials Processing and Design: Modeling, Simulation and Applications, Proceedings of the 9th International Conference on Industrial Forming Processes, Eds.: J. M. A. Cesar de Sa, A. D. Santos, American Institute of Physics Conference Proceedings; 2007, Vol. 908, 753-758; ;
  • M. Böl, S. Reese; "Computer simulations of temperature induced shape memory polymers by means of the finite element method"; Constitutive Models for Rubber V, Eds.: A. Boukamel, L. Laiarinandrasana, S. Meo, E. Verron; Taylor & Francis Group London; 2007, 93-99; ;
  • M. Böl, S. Reese; "Micromechanical modelling of skeletal muscles: From the single fibre to the whole muscle"; Proceedings of the 2nd GAMM Seminar on Continuum Biomechanics, Eds.: W. Ehlers, N. Karajan, Report of the University of Stuttgart, No. II-16; Verlag Glückauf Essen; 2007, 1-10; ;
  • A. S. Kompalka, O. T. Bruhns, S. Reese; "Damage quantification in beamlike structures using finite element model updating"; Proceedings of the 3rd International Conference on Lifetime-Oriented Design Concepts, Eds.: F. Stangenberg, O.T. Bruhns, D. Hartmann, G. Meschke; Bochum, Germany (2007), 427-436; ;
[1-20] 21-21 [ALLE 1-21]

Abschlußinformationen