Hilfsnavigation

IFAM-Logo

Zielgruppennavigation

 

Inhalt

Publikationen (35  -  2020)

 

  • R. Eggersmann, L. Stainier, M. Ortiz, S. Reese; "Model-free Data-Driven Computational Mechanics Enhanced by Tensor Voting"; Computer Methods in Applied Mechanics and Engineering; Elsevier; submitted; ;
  • D. Jaworek, J. Waimann, S. Reese; "A variational concept and its experimental calibratopm for temperature-induced rate-dependent phase transformations in steel"; Proceedings in Applied Mathematics and Mechanics (PAMM); Wiley; 2020; submitted (July 15, 2020); ;
  • J. Waimann, C. Gierden, A. Schmidt, B. Svendsen, S. Reese; "Microstructure simulation using self-consistent clustering analysis"; Proceedings in Applied Mathematics and Mechanics (PAMM); Wiley; 2020; submitted (July 15, 2020); ;
  • H. R. Bayat, S. Rezaei, A. R. Harandi, T. Brepols, S. Reese; "About the influence of neglecting locking effects on the failure behavior at the interface"; Proceedings in Applied Mathematics and Mechanics (PAMM); Wiley; 2020; DOI: 10.1002/pamm.202000110; accepted (November 17, 2020); ;
  • G. Kloppenburg, H. Holthusen, Y. Li, J.-F. Bloch, U. Hirn, J.-W. Simon; "Numerical investigation of paper using the concept of representative volume elements characterized by single fiber behavior and fiber-fiber interaction"; Proceedings of Progress in Paper Physics Seminar (PPPS2020); VTT Technical Research Centre of Finland; 2020; ISBN (Electronic): 978-951-38-8736-0, ISBN (Print): 978-951-38-8738-4; 211-214, DOI: 10.32040/2242-122X.2020.T378; Details;
  • E. Prume, G. Kloppenburg, S. Felder, J.-W. Simon; "A constitutive framework for paperboard accounting for anisotropy and compressible plasticity at finite strains"; Proceedings of Progress in Paper Physics Seminar (PPPS2020); VTT Technical Research Centre of Finland; 2020; ISBN (Electronic): 978-951-38-8736-0, ISBN (Print): 978-951-38-8738-4; 39-42, DOI: 10.32040/2242-122X.2020.T378; Details;
  • A. Alajami, Y. Li, J.-W. Simon; Eds.: H. Altenbach, M. Brünig, Z. Kowalewski; "Continuum modelling of the anisotropic elastic-plastic in-plane behavior of paper in small and large strains regimes"; Plasticity, Damage and Fracture in Advanced Materials; Springer Nature Switzerland AG; 2020; ISBN: 978-3-030-34850-2 (print), 978-3-030-34851-9 (online); 1-18, DOI: 10.1007/978-3-030-34851-9_1; Details;
  • S. Rezaei, J. R. Mianroodi, K. Khaledi, S. Reese; "A nonlocal method for modeling interfaces: Numerical simulation of decohesion and sliding at grain boundaries"; Computer Methods in Applied Mechanics and Engineering; Elsevier; 2020; https://doi.org/10.1016/j.cma.2020.112836; Details;
  • J. Waimann, S. Reese, P. Junker; "Variational material modeling of the transformation induced plasticity in polycrystalline steel"; Technische Mechanik; 2020; ISSN: 21999244; Vol. 40(1), 87-96; ;
  • M. Fernández, S. Rezaei, J. R. Mianroodi, F. Fritzen, S. Reese; "Application of artificial neural networks for the prediction of interface mechanics: a study on grain boundary constitutive behavior"; Advanced Modeling and Simulation in Engineering Sciences; Springer; 2020; https://doi.org/10.1186/s40323-019-0138-7; Details;
  • D. Jaworek, C. Gierden, T. Kinner-Becker, J. Waimann, S. Reese; "Modeling Material Modifications Using a Process Independent Approach"; Procedia Manufacturing; Elsevier; 2020; Vol. 47, 1442-1448; Details;
  • C. Gierden, J. Kochmann, J. Waimann, T. Kinner-Becker; J. Sölter, B. Svendsen, S. Reese.; "Efficient two-scale FE-FFT-based mechanical process simulation of elasto-viscoplastic polycrystals at finite strains"; Computer Methods in Applied Mechanics and Engineering; Elsevier; 2020; submitted (April 16, 2020); ;
  • O. Barfusz, T. van der Velden, T. Brepols, H. Holthusen, S. Reese; "A reduced integration-based solid-shell finite element formulation for gradient-extended damage"; Computer Methods in Applied Mechanics and Engineering; Elsevier; 2020; submitted (November 3, 2020); ;
  • S. Reese, T. Brepols, M. Fassin, L. Poggenpohl, S. Wulfinghoff; "Using structural tensors for inelastic material modeling in the finite strain regime - a novel approach to anisotropic damage"; Journal of the Mechanics and Physics of Solids; 2020; ISSN: 0022-5096; Vol. 146 (1), 1-23, DOI: 10.1016/j.jmps.2020.104174, accepted (October 3, 2020); Details;
  • A. Alipour, S. Reese, B. Svendsen, S. Wulfinghoff; "A grain boundary model considering the grain misorientation within a geometrically nonlinear gradient-extended crystal viscoplasticity theory"; Proceedings of the Royal Society A; 2020; ISSN: 1364-5021 (print), 1471-2946 (online); accepted (January 27, 2020); ;
  • S. Kastian, D. Moser, L. Grasedyck, S. Reese; Elsevier; "A two-stage surrogate model for Neo-Hookean problems based on adaptive proper orthogonal decomposition and hierarchical tensor approximation"; CMAME; 2020; accepted (August 05, 2020); ;
  • R. Bedzra, S. Reese, J.-W. Simon; "Hierarchical multi-scale modelling of flax fibre/epoxy composite by means of general anisotropic viscoelastic-viscoplastic constitutive models: Part I - Micromechanical model"; International Journal of Solids and Structures; Elsevier; 2020; ISSN: 0020-7683; Vol. 202, 58-74, DOI: 10.1016/j.ijsolstr.2020.05.020; Details;
  • H. R. Bayat; "Failure modeling of interfaces and sheet metals"; Rheinisch-Westfälische Technische Hochschule Aachen; 2020; Dissertation, DOI: 10.18154/RWTH-2020-04847; Details;
  • M. Reuvers, S. Rezaei, T. Brepols, S. Reese; "Development of a thermomechanically coupled damage approach for modeling woven ceramic matrix composites"; Technische Mechanik; 2020; ISSN: 21999244; Vol. 40(1), 59-65, DOI: 10.24352/UB.OVGU-2020-014 ; Details;
  • S. Felder, N. A. Vu, S. Reese, J.-W. Simon; "Experimental and numerical investigation of the material behavior of semi-crystalline Polyamide 6"; Technische Mechanik; 2020; ISSN: 2199-9244; Vol. 40(1), 22-30, DOI: 10.24352/UB.OVGU-2020-010 ; Details;
[1-20] 21-35 [ALLE 1-35]

Abschlußinformationen