Hilfsnavigation

IFAM-Logo

Zielgruppennavigation

 

Inhalt

Publikationen (553)

 

  • F. Cavaliere, S. Reese, S. Wulfinghoff; "Efficient two-scale simulations of engineering structures using the Hashin-Shtrikman type Finite Element method"; Computational Mechanics; Springer; 2020; ISSN: 1432-0924; Vol. 65, 159-175, DOI: 10.1007/s00466-019-01758-4; Details;
  • H. R. Bayat, S. Rezaei, T. Brepols, S. Reese; "Locking-free interface failure modeling by a cohesive discontinuous Galerkin method for matching and non-matching meshes"; International Journal for Numerical Methods in Engineering; Wiley; 2020; ISSN: 1097-0207; Vol. 121(8), 1762-1790, DOI: 10.1002/nme.6286; Details;
  • J.-W. Simon; "A review of recent trends and challenges in computational modeling of paper and paperboard at different scales"; Archives of Computational Methods in Engineering; Springer; 2020; ISSN: 1886-1784; DOI: 10.1007/s11831-020-09460-y; Details;
  • S. Felder, H. Holthusen, S. Hesseler, F. Pohlkemper, T. Gries, J.-W. Simon, S. Reese; "Incorporating crystallinity distributions into a thermo-mechanically coupled constitutive model for semi-crystalline polymers"; International Journal of Plasticity; 2020; ISSN: 0749-6419; Vol. 135, 102751, DOI: 10.1016/j.ijplas.2020.102751; Details;
  • S. Felder, N. A. Vu, S. Reese, J.-W. Simon; "Modeling the effect of temperature and degree of crystallinity on the mechanical response of Polyamide 6"; Mechanics of Materials; 2020; ISSN: 0167-6636; Vol. 148, 103476, DOI: 10.1016/j.mechmat.2020.103476; Details;
  • D. Höwer, K. C. Jois, B. Stier, B. A. Bednarcyk, E. J. Pineda, S. Reese, J.-W. Simon; "Experimental and numerical investigation of the mixed-mode delamination of monolithic laminates exhibiting severe fiber bridging"; Composite Structures; Elsevier; 2020; ISSN: 0263-8223; Vol. 242, 112035, DOI: 10.1016/j.compstruct.2020.112035; Details;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A gradient-extended two-surface damage-plasticity model for large deformations"; International Journal of Plasticity; Elsevier; 2020; ISSN: 0749-6419; Vol. 129, 10263, DOI: 10.1016/j.ijplas.2019.11.014; Details;
  • D. Jaworek, C. Gierden, J. Waimann, S. Wulfinghoff, S. Reese; "A Hashin-Shtrikman type semi-analytical homogenization procedure in multiscale modeling to account for coupled problems"; Technische Mechanik; 2020; ISSN: 21999244; Vol. 40(1), 46-52, DOI: 10.24352/UB.OVGU-2020-012; Details;
  • H. Holthusen, T. Brepols, S. Reese, J. Simon; "An anisotropic constitutive model for fiber-reinforced materials including gradient-extended damage and plasticity at finite strains"; Theoretical and Applied Fracture Mechanics; Elsevier; 2020; Vol. 108, 102642, DOI: 10.1016/j.tafmec.2020.102642; Details;
  • H. R. Bayat; "Failure modeling of interfaces and sheet metals"; Rheinisch-Westfälische Technische Hochschule Aachen; 2020; Dissertation, DOI: 10.18154/RWTH-2020-04847; Details;
  • M. Reuvers, S. Rezaei, T. Brepols, S. Reese; "Development of a thermomechanically coupled damage approach for modeling woven ceramic matrix composites"; Technische Mechanik; 2020; ISSN: 21999244; Vol. 40(1), 59-65, DOI: 10.24352/UB.OVGU-2020-014 ; Details;
  • S. Felder, N. A. Vu, S. Reese, J.-W. Simon; "Experimental and numerical investigation of the material behavior of semi-crystalline Polyamide 6"; Technische Mechanik; 2020; ISSN: 2199-9244; Vol. 40(1), 22-30; Details;
  • R. Bedzra, S. Reese, J.-W. Simon; "Hierarchical multi-scale modelling of flax fibre/epoxy composite by means of general anisotropic viscoelastic-viscoplastic constitutive models: Part II - Mesomechanical model"; International Journal of Solids and Structures; Elsevier; 2020; ISSN: 0020-7683; Vol. 202, 299-318, DOI: 10.1016/j.ijsolstr.2020.05.019; Details;
  • B. Schaaf, C. Richter, M. Feldmann, E. Toups, J.-W. Simon, S. Reese, R. Seewald, A. Schiebahn, U. Reisgen; "Material parameter determination for the simulation of hyperelastic bonds in civil engineering considering a novel material model"; International Journal of Adhesion & Adhesives; 2020; Vol. 103, 102692, DOI: 10.1016/j.ijadhadh.2020.102692; Details;
  • R. Bedzra, S. Reese, J.-W. Simon; "Hierarchical multi-scale modelling of flax fibre/epoxy composite by means of general anisotropic viscoelastic-viscoplastic constitutive models: Part I - Micromechanical model"; International Journal of Solids and Structures; Elsevier; 2020; ISSN: 0020-7683; Vol. 202, 58-74, DOI: 10.1016/j.ijsolstr.2020.05.020; Details;
  • Z. Yuan, S. Felder, S. Reese, J.-W. Simon, J. Fish; "A coupled thermo-chemo-mechanical reduced-order multiscale model for predicting residual stresses in fiber reinforced semi-crystalline polymer composites"; International Journal for Multiscale Computational Engineering; 2020; accepted (August 20, 2020); ;
  • J. Schröder, T. Wick, S. Reese, P. Wriggers, R. Müller, S. Kollmannsberger, M. Kästner, A. Schwarz, M. Igelbüscher, N. Viebahn, H. R. Bayat, S. Wulfinghoff, K. Mang, E. Rank, T. Bog, D, d'Angella, M. Elhaddad, P. Hennig, A. Düster, W. Garhuom, et al.; "A selection of benchmark problems in solid mechanics and applied mathematics"; Archives of Computational Methods in Engineering; Springer; 2020; accepted (August 08, 2020); ;
  • L. Poggenpohl, T. Brepols, H. Holthusen, S. Wulfinghoff, S. Reese; "Towards brittle damage in carbon fiber reinforced plastics: A gradient extended approach"; Composite Structures; 2020; https://doi.org/10.1016/j.compstruct.2020.112911; Accepted (September 1, 2020); ;
  • O. Barfusz, T. Brepols, T. van der Velden, J. Frischkorn, S. Reese; "A single Gauss point continuum finite element formulation for gradient-extended damage at large deformations"; Computer Methods in Applied Mechanics and Engineering; Elsevier; 2020; accepted (September 11, 2020); ;
  • A. Alipour, S. Reese, B. Svendsen, S. Wulfinghoff; "A grain boundary model considering the grain misorientation within a geometrically nonlinear gradient-extended crystal viscoplasticity theory"; Proceedings of the Royal Society A; 2020; ISSN: 1364-5021 (print), 1471-2946 (online); accepted (January 27, 2020); ;
  • S. Kastian, D. Moser, L. Grasedyck, S. Reese; Elsevier; "A two-stage surrogate model for Neo-Hookean problems based on adaptive proper orthogonal decomposition and hierarchical tensor approximation"; CMAME; 2020; accepted (August 05, 2020); ;
  • R. Eggersmann, L. Stainier, M. Ortiz, S. Reese; "Model-free Data-Driven Computational Mechanics Enhanced by Tensor Voting"; Computer Methods in Applied Mechanics and Engineering; Elsevier; submitted; ;
  • C. Gierden, J. Kochmann, J. Waimann, T. Kinner-Becker; J. Sölter, B. Svendsen, S. Reese.; "Efficient two-scale FE-FFT-based mechanical process simulation of elasto-viscoplastic polycrystals at finite strains"; Computer Methods in Applied Mechanics and Engineering; Elsevier; 2020; submitted (April 16, 2020); ;
  • H. R. Bayat, J. Krämer, S. Reese, C. Wieners, B. Wohlmuth, L. Wunderlich; "Hybrid discretizations in solid mechanics for non-linear and non-smooth problems"; Lecture Notes in Applied and Computational Mechanics; Springer; 2020; to be submitted (July 07, 2020); ;
  • G. Kloppenburg, H. Holthusen, Y. Li, J.-F. Bloch, U. Hirn, J.-W. Simon; "Numerical investigation of paper using the concept of representative volume elements characterized by single fiber behavior and fiber-fiber interaction"; Proceedings of Progress in Paper Physics Seminar (PPPS2020); VTT Technical Research Centre of Finland; 2020; ISBN (Electronic): 978-951-38-8736-0, ISBN (Print): 978-951-38-8738-4; 211-214, DOI: 10.32040/2242-122X.2020.T378; Details;
  • E. Prume, G. Kloppenburg, S. Felder, J.-W. Simon; "A constitutive framework for paperboard accounting for anisotropy and compressible plasticity at finite strains"; Proceedings of Progress in Paper Physics Seminar (PPPS2020); VTT Technical Research Centre of Finland; 2020; ISBN (Electronic): 978-951-38-8736-0, ISBN (Print): 978-951-38-8738-4; 39-42, DOI: 10.32040/2242-122X.2020.T378; Details;
  • D. Jaworek, C. Gierden, T. Kinner-Becker, J. Waimann, S. Reese; "Modeling Material Modifications Using a Process Independent Approach"; Procedia Manufacturing; Elsevier; 2020; Vol. 47, 1442-1448; Details;
  • J. Waimann, S. Reese, P. Junker; "Variational material modeling of the transformation induced plasticity in polycrystalline steel"; Technische Mechanik; 2020; ISSN: 21999244; Vol. 40(1), 87-96; ;
  • M. Fernández, S. Rezaei, J. R. Mianroodi, F. Fritzen, S. Reese; "Application of artificial neural networks for the prediction of interface mechanics: a study on grain boundary constitutive behavior"; Advanced Modeling and Simulation in Engineering Sciences; Springer; 2020; https://doi.org/10.1186/s40323-019-0138-7; Details;
  • S. Rezaei, J. R. Mianroodi, K. Khaledi, S. Reese; "A nonlocal method for modeling interfaces: Numerical simulation of decohesion and sliding at grain boundaries"; Computer Methods in Applied Mechanics and Engineering; Elsevier; 2020; https://doi.org/10.1016/j.cma.2020.112836; Details;
  • A. Alajami, Y. Li, J.-W. Simon; Eds.: H. Altenbach, M. Brünig, Z. Kowalewski; "Continuum modelling of the anisotropic elastic-plastic in-plane behavior of paper in small and large strains regimes"; Plasticity, Damage and Fracture in Advanced Materials; Springer Nature Switzerland AG; 2020; ISBN: 978-3-030-34850-2 (print), 978-3-030-34851-9 (online); 1-18, DOI: 10.1007/978-3-030-34851-9_1; Details;
  • D. Jaworek, J. Waimann, S. Reese; "A variational concept and its experimental calibratopm for temperature-induced rate-dependent phase transformations in steel"; Proceedings in Applied Mathematics and Mechanics (PAMM); Wiley; 2020; submitted (July 15, 2020); ;
  • J. Waimann, C. Gierden, A. Schmidt, B. Svendsen, S. Reese; "Microstructure simulation using self-consistent clustering analysis"; Proceedings in Applied Mathematics and Mechanics (PAMM); Wiley; 2020; submitted (July 15, 2020); ;
  • H. R. Bayat, S. Rezaei, A. R. Harandi, T. Brepols, S. Reese; "About the influence of neglecting locking effects on the failure behavior at the interface"; Proceedings in Applied Mathematics and Mechanics (PAMM); Wiley; 2020; submitted (June 26, 2020); ;
  • Nikolaus Adams, Wolfgang Schröder, Rolf Radespiel, Oskar Haidn, Thomas Sattelmayer, Christian Stemmer, Bernhard Weigand; "Future Space-Transport-System Components under High Thermal and Mechanical Loads"; Notes on Numerical Fluid Mechanics and Multidisciplinary Design; Springer International Publishing; 2020; ISBN: 978-3-030-53847-7; ISSN: 1612-2909; Vol. 146, DOI: 10.1007/978-3-030-53847-7; Details;
  • R. Eggersmann, T. Kirchdoerfer, S. Reese, L. Stainier, M. Ortiz; "Model-free Data-driven Inelasticity"; Computer Methods in Applied Mechanics and Engineering; Elsevier; 2019; Vol. 350, 81-99, DOI: 10.1016/j.cma.2019.02.016; Details;
  • M. Fassin, R. Eggersmann, S. Wulfinghoff, S. Reese; "Gradient-extended anisotropic brittle damage modeling using a second order damage tensor – Theory, implementation and numerical examples"; International Journal of Solids and Structures; Elsevier; 2019; Vol. 167, 93-126, DOI: 10.1016/j.ijsolstr.2019.02.009; Details;
  • M. Fassin, R. Eggersmann, S. Wulfinghoff, S. Reese; "Efficient algorithmic incorporation of tension compression asymmetry into an anisotropic damage model"; Computer Methods in Applied Mechanics and Engineering; Elsevier; 2019; Vol. 354, 932-962, DOI: 10.1016/j.cma.2019.03.051; Details;
  • D. Höwer, S. Yu, T. M. Ricks, B. A. Bednarcyk, E. J. Pineda, B. Stier, S. Reese, J.-W. Simon; "Weave geometry generation avoiding interferences for mesoscale RVEs"; Journal of Materials Science & Technology; Elsevier; 2019; ISSN: 1005-0302; Vol. 35(12), 2869-2882, DOI: 10.1016/j.jmst.2018.12.027; Details;
  • D. Pivovarov, K. Willner, P. Steinmann, S. Brumme, M. Müller, T. Srisupattarawanit, G.-P. Ostermeyer, C. Henning, T. Ricken, S. Kastian, S. Reese, D. Moser, L. Grasedyck, J. Biehler, M. Pfaller, W. Wall, T. Kolsche, O. v. Estorff, R. Gruhlke, et al.; Wiley Online Library; "Challenges of order reduction techniques for problems involving polymorphic uncertainty"; GAMM-Mitteilungen; Wiley; 2019; https://doi.org/10.1002/gamm.201900011; Details;
  • E. J. Pineda, M. Fassin, S. Reese, J.-W. Simon; "Method of Cells-Based Multiscale Modeling of Elastic Properties of Filament Wound C/C-SiC Including Free Si and Matrix Porosity"; Journal of Materials Science & Technology; Elsevier; 2019; Vol. 35, 2906-2918, DOI: 10.1016/j.jmst.2019.05.043; Details;
  • J. Waimann, K. Hackl, P. Junker; "Variational Modeling and Finite-Element Simulation of Functional Fatigue in Polycrystalline Shape Memory Alloys"; Journal of Optimization Theory and Applications; Springer; 2019; ISSN: 0022-3239 (Print), 1573-2878 (Online); Vol. 184(1), 98-124, DOI: 10.1007/s10957-019-01476-0; Details;
  • K. Khaledi, T. Brepols, S. Reese; "Numerical simulation of periodic cracking mechanism in microscopic surface films during roll bonding processes"; Material Science and Engineering Technology; Wiley; 2019; ISSN: 0933-5137; Vol. 50 (8), 1039-1049, DOI: 10.1002/mawe.201900035; Details;
  • A. Alipour, S. Reese, S. Wulfinghoff; "A grain boundary model for gradient-extended geometrically nonlinear crystal plasticity: theory and numerics"; International Journal of Plasticity; 2019; ISSN: 0749-6419; Vol. 118, 17-35, DOI: 10.1016/j.ijplas.2019.01.009; Details;
  • S. Kastian, S. Reese; "An adaptive way of choosing significant snapshots for the Proper Orthogonal Decomposition"; IUTAM Symposium on Model Order Reduction of Coupled Systems; Springer; 2019; https://doi.org/10.1007/978-3-030-21013-7_5; Details;
  • R. Bedzra, Y. Li, S. Reese, J.-W. Simon; "A comparative study of a multi-surface and a non-quadratic plasticity model with application to the in-plane anisotropic elastoplastic modelling of paper and paperboard"; Journal of Composite Materials; SAGE; 2019; ISSN: 0021-9983; Vol. 53, 753-767, DOI: 10.1177/0021998318790656; Details;
  • T. Brepols, S. Wulfinghoff, S. Reese; "A geometrically nonlinear micromorphic damage-plasticity model"; Proceedings in Applied Mathematics and Mechanics; Wiley; 2019; ISSN: 1617-7061; Vol. 19:e201900294, DOI: 10.1002/pamm.201900294; Details;
  • D. Jaworek, C. Gierden, J. Waimann, S. Wulfinghoff, S. Reese; "A Hashin-Shtrikman type semi-analytical homogenization procedure"; Proceedings in Applied Mathematics and Mechanics; Wiley; 2019; Vol. 19 (1), DOI: 10.1002/pamm.201900191; Details;
  • O. Barfusz, T. Brepols, J. Frischkorn, S. Reese; "Towards the incorporation of damage into solid-shells based on reduced integration"; Proceedings in Applied Mathematics and Mechanics; Wiley; 2019; Vol. 19:e201900055, DOI:10.1002/pamm.201900055; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Vienna (Austria), February 18-22, 2019; Details;
  • K. Khaledi, L. Poggenpohl, S. Reese; "Application of a locking-free element in modeling of joining by clinching"; AIP Conference Proceedings; 2019; Vol. 2113, 0500301-0500306, DOI: 10.1063/1.5112594; Details;
  • C. Gierden, J. Kochmann, J. Waimann, B. Svendsen, S. Reese; "Microstructural convergence analysis as basis for an efficient and accurate two-scale FE-FFT-based simulation approach"; Proceedings of the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry; 2019; ISBN: 978-3-86219-5093-9; GACM, Kassel (Germany), August 28-30, 2019; Details;
  • S. Felder, H. Holthusen, S. Hesseler, F. Pohlkemper, J.-W. Simon, T. Gries, S. Reese; "A finite strain thermo-mechanically coupled material model for semi-crystalline polymers"; COMPLAS XV: Proceedings of the XV International Conference on Computational Plasticity: Fundamentals and Applications; 2019; XV International Conference on Computational Plasticity: Fundamentals and Applications, Barcelona (Spain), September 3-5, 2019; 249-260; Details;
  • K. Martin, S. Reese; "Thermo‐mechanical fluid‐structure interaction for thermal buckling"; Proceedings in Applied Mathematics and Mechanics; Wiley; 2019; Vol. 19:e201900456, DOI:10.1002/pamm.201900456; 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Vienna (Austria), February 18-22, 2019; Details;
  • K. Martin, S. Reese; "Thermo-mechanically coupled fluid structure interaction for thermal buckling"; Proceedings of the 8th International Conference on Coupled Problems in Science and Engineering; 2019; VIII International Conference on Coupled Problems in Science and Engineering, Sitges (Spain), June 03-05, 2019 (submitted); ;
  • J. Waimann, K. Hackl, P. Junker; "A variational material model for shape memory alloys under thermal cycling"; Proceedings in Applied Mathematics and Mechanics; Wiley; 2019; Vol. 19 (1), 1-2, DOI: 10.1002/pamm.201900052; ;
  • J. Waimann, K. Hackl, P. Junker; "Variational modeling of irreversible effects in cycled polycrystalline shape memory alloys"; Proceedings of the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry; Kassel University Press GmbH; 2019; ISBN: 978-3-86219-5093-9; 7-10; ;
[1-56] 57-112 113-168 169-224 225-280 281-336 337-392 393-448 449-504 505-553 [ALLE 1-553]

Abschlußinformationen